Download Brodit ProClip 654984

Transcript
27 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 654984
654984 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320286549844
Item no 654984 fits:
Alfa Romeo Giulietta 10-15 (For all countries)
1 (2)
INSTALLATION INSTRUCTIONS
1.
2.
3.
4.
Please read all of the instructions and look at the pictures before attaching the ProClip. This ProClip can be
placed on desired position on the dashboard.
1. Insert the thin end of the enclosed gap opener into the gap on the top of the dashboard, to widen the gap. Use
the enclosed alcohol pad to clean the area where the ProClip is to be installed. Remove the adhesive tape cover
on the ProClip. Take note of the plastic hook/clip in the gap, see the white arrow.
2. Press the upper edge of the ProClip into the gap between the gap opener and the hook/clip in the gap.
3. In one continuous motion; press the upper edge forward all the way into the gap and pull the lower edge
towards you so the lower angled edge hooks around the upper edge of the air vent. Remove the gap opener.
4. The ProClip is in place.
2 (2)