Transcript
Se LANTEC EZ Swap EVO) Dual Bay 2.5” SATA SSD/HDD Removable Rack Supports Two 2.5” SATA Hard Drives / SSDs Fits In Any Standard 3.5” Drive Bay Hot-Pluggable Compatible With SATA 1/11 / lll Hard Drives & SSDs Aluminum HDD Case For Maximum Heat Dissipation Ejection Latch for Easy Removal of Hard Drive Security Key Lock Design * Introduction: | \ Introducing the EZ Swap EVO, the latest in removable rack for holding your SATA 1/11/111 SSD or HDD. This removable rack is compact, strong and simple in design to give the convenient of swapping your storage device at the same time provide you with the security of locking up your storage. It fit easily into any standard 3.5” drive bay and crafted using Aluminum to dissipate the heat generated by your speedy SSD or HDD. The pass thru interface will offer your SATA Ill SDD/HDD screaming throughput that you always like to see in an enclosure from Vantec like the EZ Swap EVO. * Specifiactions: AN Model: MRK-225S6-BK Device Support: ~~ SATA I/1l/ Ill 6G Hard Drives & SSDs Device Size: 2.9” (9.5mm Height) Interface: SATA Material: Aluminum & Metal Dimension: 135 (L) x 102(W) x 25(H) mm - System Requirement Ÿ > Microsoft Windows XP / Vista / 7 > SATA-equipped Sy stem > For SATA speeds, the system must support SATA specifications * Package Contents A Vant ec EZ Swap EVO Power Cable x 2 Installation Screws SATA Cable x 2 Installation Guide Key x 2 Send us an e-mail at: [email protected] www.vantecusa.com All Registered Trademarks Belong To Their Respective Companies Copyright © 2012 Vantec Thermal Technologies. All Rights Reserved.