Transcript
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING BROTHER ARMREST PRINTER MOUNT Placement Weight Height Width Depth On top of any MCS Top Plate or any flat stable surface 11.25 lbs 15.0” (includes 5” pole) 5.5” 11.6” Features: • • • • • • • • • • • • • Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Convenient flip-up armrest and printer mount all in one For use with the following Brother printers: • PocketJet II • PocketJet 200 • PocketJet 3 Plus • PocketJet 3 • PocketJet 6 Plus (NiMH battery only) • PocketJet 6 Mount holds printer and paper roll in separate lock down trays Paper roll is enclosed to protect from dirt and dust The cover latches shut and can be used with a paddle lock for extra security Indicator lights and on/off button are easy to see and accessible when the cover is closed Paper deflector prevents paper from curling up and jamming Cable strain relief protects connector interface on the printer engine from damage Printer can be easily removed from the mount for use outside of the vehicle Paper feeds out the side towards the driver Paper and printer not included Item No. 7160-0006 D H W 3001 Borham Ave. | Stevens Point, WI 54481, USA Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209 Email: [email protected] | Website: www.gamberjohnson.com This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC