Transcript
S P E F C I L E ET-PKE16S Ceiling mount bracket for low ceilings D escription This ceiling mount bracket is used when mounting a Panasonic projector to low ceilings. NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKE16B bracket assembly. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W × H × D): ±15° ±5° ±10° 400 × 205 × 400 mm (15-3/4˝ × 8-1/16˝ × 15-3/4˝ ) Approx. 8.5 kg* (18.7 lbs*) ET-PKE16B Weight: Applicable bracket assembly: * Average value. May differ depending on models. Parts Projector mount bracket . . . . . . . . . . . . . . . . . . . 1 Caution: • Mounting should be done by a qualified technician. • Make sure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions thoroughly before starting. • Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions. • When the product is no longer going to be used, have it disposed of quickly by a professional disposal service. A* 1 650 (25-19/32) * From c e nte r of rot ation to ce nte r of le ns 386.5 (15-7/32) 428.5 (16-7/8) Projector 340 (13-3/8) 90 (3-17/32) 10° The illustration shows the ceiling mount bracket when it is combined with the ET-PKE16B and the PT-EX16K is attached. 10° 4 – ∅ 13 ( ∅ 1/ 2 ) 90 (3-17/32) 25* (31/32)* 469 (18-15/32) 292.5 (11-17/32) 10° 5° 10° 5° Dimensions 340 (13-3/8) 13 × 20 (1/2 × 25/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of September 2011 SFL11A019 1/1
