Download Panasonic ET-PKC200W project mount
Transcript
S P E F C I L E ET-PKC200W Wall-hanging bracket Description This bracket is used when mounting a Panasonic’s applicable projector to walls. Specifications Vertical correction angle: Horizontal slant correction angle: Dimensions (W × H × D): +4° – -2° +5° – -5° 463 × 244 × 711 mm (18-7/32 × 7-27/32 × 28 inches) Approx. 8.5 kg* (18.7 lbs*) PT-CW331R/CW330/CW241R/CW240/CX301R/CX300 Weight: Applicable projector: * Average value. May differ depending on models. Parts Wall-hanging bracket . . . . . . . . . . . . . . . . . . . . Cover plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . Arm bracket with adjustment unit . . . . . . . . . . . . Projector mounting bracket (L) . . . . . . . . . . . . . . Projector mounting bracket (R) . . . . . . . . . . . . . . Washer-fitted screws (M4 × 10) . . . . . . . . . . . . . . . . . . . . . 1 2 1 1 1 9 Washer-fitted hexagonal bolts (M8 × 20) Washer-fitted hexagonal bolts (M5 × 10) Safety wire . . . . . . . . . . . . . . . . . . . . . . Cable tie . . . . . . . . . . . . . . . . . . . . . . . . Wall-hanging bracket mounting sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 1 2 1 Caution: • Mounting should be done by a qualified technician. • Make sure that the mounting (wall) area has sufficient strength. • Read the enclosed mounting instructions thoroughly before starting. • Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions. • When the product is no longer going to be used, have it disposed of quickly by a professional disposal service. Dimensions 463 (18-7/32) 367 (14-7/16) 711 (28) Maximum length: 834 ( 32-27/32) Minimum length: 711 (28) 549 (21-5/8) Wall-hanging bracket Projector The illustration shows the wall-hanging bracket attached to the projector. SFD12A018-1 ( 2 - 3 /4) 70 231 ( 9 -3/32) 37 (1-15/32) As of April 2013 Wall-hanging bracket 174 ( 6-27/32) 475 (18-11/16) 357 (14-1/1 6 ) Projector unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/2 S P E C F I L E ET-PKC200W Wall-hanging bracket Dimensions • Wall-hanging bracket 45 × 80 (1-25/32 × 3-5/32) 135 (5-5/16) 174 (6-27/32) 27 (1-1/16) 13 × 33 (1/2 × 1-5/16) 224 (8-13/16) 406 (15-31/32) 463 (18-7/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. As of April 2013 SFD12A018-1 2/2