Transcript
S P E C F I L E ET-PKA110S Ceiling mount bracket for low ceilings D escription This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling. Specifications Vertical correction angle Horizontal slant correction angle Horizontal turn correction angle Dimensions (W × H × D) Weight Applicable projectors +5°, -15° ±10° ±5° 306 × 89.5 × 174 mm (12-1/16˝ × 3-17/32˝ × 6-7/8˝) Approx. 1.3 kg* (2.9 lbs*) PT-AE7000/AT5000/AR100/AH1000 * Average value. May differ depending on models. Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . 1 Projector mount bracket . . . . . . . . . . . . . . . . 1 Washer-fitted screws (M4 × 10) . . . . . . . . . . . 5 Wire rope for ceiling mount bracket . . Flat wire clip for ceiling mount bracket Clamp tube for ceiling mount bracket . Wire rope for projector unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 2 1 Caution: • All mounting work must be done by a qualified technician. • Ensure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions carefully before starting the mounting procedure. • When the system is no longer to be used, have a qualified technician promptly remove and dispose of it. • Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool should be used. Dimensions Illustration shows the ET-PKA110S attached to a projector. Attachment plate 25 ( 31/32) 114 (4-1/2) 140 ( 5-1/2) ∅8.5 (∅11/32) Projector 104 (4-3/32) 52.5 ( 2-1/16 ) PT-AE7000/AT5000: 204 (8-1/32) PT-AR100/AH1000: 220 (8-21/16) 160 ( 6-5/16 ) 154 ( 6-1/16 ) 3-∅9.5 ( ∅3/8 ) Attachement plate 130 ( 5-1/8 ) 20 ( 2-9/16 ) 150 ( 5-29/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of September 2011 SFL11A006 1/1
