Download Peerless PSTKU-PRSU-W project mount

Transcript
PSTK-PRSU/WH
PSTKU-PRSU/WH
PSTKE-PRSU/WH
Product Information Sheet
SHORT, ULTRA-SHORT & EXTREME-SHORT THROW
PROJECTOR ARMS
Features & Benefits
• Adjustable extension suitable for short, ultra-short and extreme-short throw
projectors for use with interactive white boards
• Includes PRS-UNV projector mount with fine image adjustments:
20° down / 5° up tilt; +/- 10° roll; +/- 15° swivel
• Quick-release mechanism allows fast projector install/removal for maintenance
• Security screws included to safeguard projector
• Universal adaptor plate for projectors up to 11kg (25lbs) and mounting pattern
up to 448mm (17.63”)
• Internal cable management with easy-access cover
• Key slots built into wall plate enable one-person installation
• Low-profile wall plate and high arm position allow installation into room with low ceilings
Part No.
Tilt / Roll / Swivel
Extension
Arm Length
Weight Capacity
PSTK-PRSU/WH
+20°, -5° / ±10° / ±15°
1040mm to 1310mm*
1404mm (55.26”)
11kg (25lbs)
PSTKU-PRSU/WH
+20°, -5° / ±10° / ±15°
250mm to 620mm*
719mm (28.31”)
11kg (25lbs)
PSTKE-PRSU/WH
+20°, -5° / ±10° / ±15°
160mm to 300mm*
394mm (15.51”)
11kg (25lbs)
* Actual projector throw distance is approximately 150-200mm shorter than extension measurement due to distance between centre of mount and front of projector lens.
FOR MORE INFORMATION ON THIS PRODUCT AND OUR FULL
RANGE OF PROFESSIONAL MOUNTING SOLUTIONS CONTACT:
e
t
[email protected]
01923 200100
w
f
www.peerless-av.co.uk
01923 200 101