Transcript
| 2 5 4 | 6 Ш 170.0+0.2 _ О a с у с 9 Z 8 ZN | | ol) a ls al у RU45 IDC (KDA) RIGHT ANGLE JACK Krone 45°—110 Dual ; : , > ©. i SCALE 1/3 ое еее) à Specification mo momo SS 5 = on с сл сл сл сл сл сл o > des ds 4 ds des EN des — Material > = = > = = = = 1. Top & Bottom Case : SECC, 1.2mm thickness With Black color = = = = = = = = painted. | ~ | | | | | | OL 2. №45 Jack Housing : PBI, UL 94V—0. 5. KJ45 Jack Shield : Bronze with Nickel plated. ' J. =— 4. RJ45 Jack Contact material & finished 4—1. Phosphor Bronze, Round pin. 4—2. Min. 50 micro—inch Gold plating over 50-60 micro—inch 1/3.0+0.2 _ Nickel plated. >. IDC Housing : Polycarbonate, UL 94V—2, KRONE dual. - 6. IDC Terminal material & finished - o—1. Phosphor Bronze with 50 micro—inch lin plated. = Е ПО ee To conan 3 | CEE ]ose 0—3. Use for 22-20 AWG stranded & solid wire. = y 1 2 3 4 5 6 7 8 Performance : | \ 7 a. The IDC color codes combine two wirings of [SOJA & I568B. b. Operation Temperature : —40°C to 30°C. GENERAL DRAWING |30.JUL.2008| WLL . , TOLERANCE c. Insertion Force : 900 gms for 8 contacts. OF DIMENSIONS | =~ 20 JUL 20081 JANE = @® d. Retention Strength : /.7 kgs between Jack and Plug. X.XXX 40.005 _ equip e. Durability A 100 L APPROVAL (30.JUL.2008 | JAIMY e—1. Jack : /50 cycles Plug—Jack mating and unmating test, insertion cycles DATE NAME TEM NO: at 20 cycles/minute max. Contact resistance test per 100 cycles. 1/2 DES. e—2. IDC : Max. 200 punching times. SCALE (A4) | UNIT mm — f. The Cat.5e performance is in compliance with the ANSI/TIA/EIA 568 B.2 standard. DRAWING МО. DRAWING CLASSIFICATION S SHEET | 1 OF 1 25 4 10cm о