Download InLine 00029A storage enclosure
Transcript
Telefon: +49 (0)641 / 9726-0 · Telefax: +49 (0)641 / 9726-111 E-Mail: [email protected] · Internet: www.inline-info.de « ZURÜCK Category: Storage, HDD external, 6.35cm (2.5") USB 3.0 InLine® Ext. Enclosure 2.5" USB 3.0, for SATA HDD/SSD Art.-Nr.:00029A - EAN:4043718202423 This USB 3.0 Portable Hard Drive Enclosure (For 2.5" SATA Hard Drive) provides an easy solution to connect a 2.5" SATA hard drive to the USB port of your computer. The product is compliant with USB Specification Revision 3.0 .The "Toolless" / "Screwless" fool-proof housing design of this product enables easy and reliable installation for all levels of end user. Comply with Universal Serial Bus 3.0 specification Revision 1.0 with data transfer rate up to 5Gbps Backward compatible with Universal Serial Bus Specification Revision 2.0 Screwless housing design - You do not need any tool to install a hard drive into the enclosure Support Plug-and-Play, Hot-Swap and Wake-Up LED indicators: Power On, HDD Activity and USB mode Dimensions: 133.5mm(L) X 81.2mm(W) X 17.5mm(H) (approx.) Weight: 66.5 gram(approx.) Working temperature: 0-55°C One Touch Backup (OTB) software supports Windows 7, Vista, and XP O/S (32/64-bit) SATA Hard disk Interface Comply with Serial ATA Specification Revision 2.6 Support SATA I and SATA II hard disk with data transfer rate of 1.5Gbps and 3.0Gbps Support large capacity storage hard drive over 2TB Fit only the 2.5" hard disk with its maximum physical height of 9.5mm Package Contents: USB 3.0 Portable Hard Drive Enclosure x 1, User Manual x 1, OTB Software CD x 1 © INTOS ELECTRONIC AG · Siemensstraße 11 · D-35394 Gießen