Transcript
by Introducing an important new improvement in spring roller design. Now available as an optional upgrade on selected models of Draper walland ceiling-mounted screens, the AutoReturn spring roller includes a built-in inertia reduction mechanism. With AutoReturn the screen unrolls in the conventional manner, then slowly and gently retracts to the closed position on its own after a simple tug on the handle. Features • Viewing surface pulls down easily, like a standard spring roller operated projection screen. • Return the screen to the case with a simple pull—no repetitive tugging or downward momentum is required to engage the AutoReturn Roller. • Screen surface retracts slowly and smoothly into the case, slowing even more as it approaches its upper limit. • Intermediate stop positions allow you to lower or raise the screen completely, or stop at any point in between. • Prevents potential damage to the dowel or screen surface through repeated impact with the case. • Cost-effective solution. • Available in all existing sizes and fabrics for each model of projection screen shown below. • Patent Pending Models AutoReturn is available on these models of Draper Manual Projection Screens: Salara/Series M Silhouette/Series M Access/Series M Luma 2 Luma 411 S. Pearl St., Spiceland, IN 47385 USA 765-987-7999 fax 765-987-7142 Copyright © 2008 Draper, Inc. www.draperinc.com Contains 25% PCW Recycled Content Form: AutoReturn_Flyer_08 Printed in U.S.A.