Transcript
EXCEPTIONAL ENGINEERING | ROCK SOLID | EXTENSIVE TESTING OFFSET UNIVERSAL MOUNTING STEP Placement Drilling Required Pole Weight Height Width Depth Any MCS Top Plate or Vehicle Base without a welded pole or directly to the floor No - When mounting onto a Vehicle Base or MCS Top Plate Yes - when mounting directly to the vehicle floor Order Lower and Upper Tube separately 3.0 lbs 4.0” 3.5” 3.5” Features: • • • • Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will not interfere with levers or factory-installed console The Offset Universal Mounting Step is already included in the following Vehicle Bases (Item No. DS-112, DS-118, DS-120, DS-124, DS-132, DS-142, DS-144, DS-150, 7160-0036, 7160-0046, 7160-0055, 7160-0222, 7160-0234, 7160-0256, 7160-0260, 7160-0262, 7160-0281, 7160-0323, 7160-0342 or 7160-0350) however, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed • Is not compatible with the following Vehicle Bases (Item No. DS-52, DS-53, DS-56, DS-57, DS-100, DS-138, 7160-0090, 7160-0116, 7160-0133, 7160-0198, 7160-0248 or 7160-0451) Item No. DS-STEP H W D 3001 Borham Ave. | Stevens Point, WI 54481, USA Phone: 715.344-3482 | Toll-free: 800.487-9220 | Fax: 715.344-5209 Email: [email protected] | Website: www.gamberjohnson.com This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2012 Gamber-Johnson LLC