Download Spaun SBK 9935 NF

/ Thespecialist for
SAT IF distribution //
Power-Class
Launch Amplifier for large distribution networks / 9 inputs
SBK 9935 NF, SBK 9965 NF
Sterdb Fuecion and
Exfch-Mode Poseer Supcpír
Launch- and post amplifier for cascading with SMK 99xx F.
LED control: @ green = active
SAT IF: O vellow = standby
+ À special amplifier / filter design improves the @ red = DC error
intermodulation properties of the launch amplifiers
considerably FO
* The high selective input filter guarantees that L———
interference products of the LNBs can not drive the Standby LNB supply voltage
amplifiers into saturation your] IDC ENT
* An additional output filter ensures that . . Quattro or QUAD-LNB
intermodulation products and noise effects do not . .
degrade the terrestrial signal 22 kHz a 12V Standby or normal operation
1av modes selectable for SAT
Daverbenleb/ reception
Terrestrial: TT
+ Forward path:
Terrestrial amplifier with pre emphasis 10 TE ag Return path: selectable: off,
= - passive, active. Gain selectable:
* Return path: «Uy. 20,15, 10 or 5 dB
Selectable: off, passive, active БОВ a off
Gain selectable: 20, 15, 10 or 5 de passive
+ CATV compatible
* Push pull technology SAT
* Level adjuster range: 0... -15 de Er Level adjuster for each
@) SAT IF signals 0 ... -10 dB
Miscellaneous:
* Selective standby function:
If all subscribers only watch TV programms of SAT system
A, only the appropriate LNB is supplied with power. The
internal logic tums off the power supply of all other LMBs
as well as that of the integrated amplifiers. 9 DC-decoupled terminating resistors are
This process results in significant energy savings. shipped with the SBK 99x5 NF to termi-
+ Ground clamp nate the trunk lines.
ZFR 75 DC /Set (Art. No.: 871511)
www.spaun.com
CJ/ SPAUN)
Inputs / outputs
SAT / terrestrial
Return path loss
terr passive: 45... 30 MHz
Return path loss
terr passive: 5... 65 MHz
Raturn path gain
terr. active: 5... 30 MHz
Ratum path gain
terr. active: 5... 65 MHz
Gain
Тент. 47... 862 MHz
Сат
terr. 85... 862 MHz
Galn
SATIF: 950 … 2200 MHz
Noise figure Tarrestrial
Moise figure return path Terrestrial
Noise figura SAT
Output level Retum path 5... 30 MHz max.
60 dB IMA, / EN 60728-3
Output level Retum path 5 … 65 MHz max.
60 d6 IMA, / EN 60728-3
Output level 47... 862 MHz max.
60 de IMA. / EN 60728-3
Qutput level 85... 862 MHz max.
60 de IMA. / EN 607283
Output level 950 … 2200 MHz max.
35 dB IMA, / EN 60728-3
5 Terestrial active / SAT
SAT / terrestrial
Isolation
Trunk / trunk
Mains power supply V=
Power consumption
Terrestrial active / SAT active
Power consumption standby
LMB remote currant
Single port current
Amblent temperature
Dimensions (mm)
4040326423790
-2 5 dB
5, 10, 15, 20 dB
26... 30 dB
27 … 41 de
<7 dB
6 de
< 5,5 de
110 dBpV
118 dByV
117 dByV
> 47 de
> 40 de
contactéspaun.com
100 ...
4040326424001
9/9
8/1
-2,5 dE
5, 10, 15, 20 dB
26... 30 de
27 … #1 de
< 7 de
6 de
< 5,5 dB
110 dBuv
116 dByuV
117 dByV
> 42 dB
> 40 dB
> 35 dB
240 Y / 47 = 63 Hz
55 W
< 15 W
1A
500 má.
-20 ... +50 °С
445 х 190 х 100