Download Transcend 32GB 2.5" IDE
Transcript
PSD520 Transcend PSD is a series of 2.5 PATA SSD with high performance and advanced flash control techniques. Due to smaller size (fit the standard dimensions of 2.5” IDE Hard Disk Drives), huge capacity, high speed, and low power consumption, Solid State Disk is perfect replacement storage device for PCs, Laptops, gaming systems, and handheld devices. Features - RoHS compliant products - Single Power Supply: 5V±10% - Built-in BCH ECC (Error Correction Code) functionality - Support Global Wear-Leveling, Static Data Refresh, Early Retirement, and Erase Count Monitor functions to extend product life - True IDE Mode supports: Ultra DMA Mode 0 to Ultra DMA Mode 6 MultiWord DMA Mode 0 to MultiWord DMA Mode 2 PIO Mode 0 to PIO Mode 4 - Support S.M.A.R.T (Self-defined) - Support Security Command - Support Host Protected Area o - MTBF: 1,000,000 hours (in 25 C) Dimensions Side Millimeters Inches A 100.30 0.40 3.949 0.016 B 69.85 0.20 2.750 0.008 C 7.40 0.15 0.292 0.004 Specifications Capacity Model P/N Cylinder Head Sector User LBA Physical Capacity TS32GPSD520 16383 15 63 62,533,632 32,018,219,584 Byte TS64GPSD520 16383 15 63 125,044,736 64,002,424,832 Byte Note. PSD520 series is shipped with RAW format. Inquiry for formatted device please contact with sales/PM. Performance (MB/s) Sequential Read Sequential Write Random 4K Read Random 4K Write 32GB 118.3 102.4 11.58 1.73 64GB 111 97 10.96 1.849 o Note : Test by Crystal Disk Mark V3.0.1, 500MB size @25 C, P5K-VM(ICH 9), 1GB RAM * 2, IDE interface support up to UDMA6, Windows® XP SP3. Power consumption (mA) Capacity 32GB 64GB Read 252.8 266 Write 257.3 268 8.7 7.8 Idle Note: All data above are maximum value from various test patterns. Endurance Capacity Tera Byte Write 32GB 64GB 666.6 TBW 1333.2 TBW Note: Based on JEDEC JESD218A specification, Client Application Class. And based on the following scenario: Active use: o o 40 C, 8hrs/day; Retention use: 30 C 1year. Interface Part Number Interface Transfer Mode Connector TS32G~64G520 True IDE mode Ultra DMA mode 0~6 Multi-Word DMA Mode 0~2 PIO Mode 0~4 44pin 2mm pitch Pin male Header Environmental Specifications o o o o Operating Temperature -40 C to 85 C Storage Temperature -40 C to 85 C Operating Humidity (Non condensation) 0% to 95% Storage Humidity (Non condensation) 0% to 95% SHOCK & Vibration Test Condition Mechanical Shock Test Vibration Test 1500G, 0.5ms, 3 axes 20G (Peak-to-Peak) 20Hz to 2000Hz (Frequency) Note: If Third party report is needed, please contact with sales/PM. EMC/EMI Compliance CE, FCC and BSMI Note: If Third party report is needed, please contact with sales/PM. Standard IEC 60068-2-27 IEC 60068-2-6