Download Brodit 530263 holder

13 February, 2012, www.brodit.com, © 2012 Brodit AB
Product 530263
530263 Active holder with cig-plug. With tilt swivel. 2A charger. With RS232 connector.
The active holder charges your battery when it is in the holder. The charging device connects to the PDA
automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in
order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. The RS232 connector
enables for data transfer. Attach onto a ProClip Mounting Platform.
EAN: 7320285302631
Item no 530263 fits:
Intermec CN50
1 (2)
INSTALLATION INSTRUCTIONS
1.
2.
3.
4.
Attention! Read all instructions before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the attaching part on the back.
2. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.
3. Place the holder over the attaching part. Screw the holder onto the attaching part.
4. The holder is in place.
2 (2)