Transcript
Model information about cooker hoods Miele Model name/ model ID number Configuration Vented/Recirculation Convertible for recirculation operation Rear wall fixing Ceiling fitting Housing unit fitting top/bottom/side Dimensions Product dimensions Unit height including chimney piece Niche dimensions for assembly Depth Minimum Minimum distance above gas hob Features 1 Vent connection top/rear/side ) Vent connection diameter Non-return flap in unit Fan adjustable infinitely/in stages (no.) 2 Intensive setting ) 3 Flow rate ) Vented from – To Recirculation from – To Intensive setting vented/recirculation 4 Net weight ) Electrical specifications Voltage Wattage Fuse Connection cable length Earthed plug/Fixed connection Interference suppressed Mains interference free Name and address of supplier Note: • Yes, available 1 DA249-4 ● /– – / / / / ● – –/–/– Height Width Depth Vented Recirculation Height Width Depth cm cm cm cm cm cm cm cm cm cm cm – 90,0 50,0 45,0 ● mm 3 m /h 3 m /h 3 m /h kg V W A cm /●/– 150 ●/ –/– 200 - 400 150 - 330 640 / 490 22,5 230 240 10 150 ●/– ● ● Miele & Cie. KG, Postfach, 33325 Gütersloh ) Precise dimension ) Short-term high ventilation rate in conjunction with higher noise level 3 ) Depending on external fan 4 ) When fitting under a wall unit or on the wall/ceiling, ensure that the wall unit and the wall/ceiling can support the weight of the cooker hood (including decor front if appropriate). Note: Table established 07/05. Subject to further development. 2