Transcript
Don’t take a Chance on Patient Safety Putting the right label on an IV bag or blood bag is critical to ensure patient safety. Not only are our labels optimized to provide the highest quality bar codes, but Zebra carefully selects and tests our IV bag and blood bag label materials to meet the print durability and adhesive safety standards required in the healthcare industry. Utilizing FDA 175.105-compliant adhesives, our IV bag and primary blood bag labels are safe to apply directly onto bags. Our secondary blood bag labels are designed to be applied onto existing blood bag labels. The bottom line: Zebra printers and labels are the safest choice for your IV bag and blood bag labeling requirements. Zebra® IV Bag and Blood Bag Label Solutions Stock Sizes Ready to Ship IV Bag Unit Dose Labels 3.5” Media Descriptions 4” 1” 1” “Easy-Remove“ Design HC10000684 Z-Select 4000D 3.5” x 1” Perforated between labels Secondary Blood Bag Label Z-Select™ 4000D A 6.3 mil top-coated bright white direct thermal paper with a special FDA 175.105-compliant acrylic-based cold temperature adhesive. Service temperature -65° F to 140° F (-54° C to 60° C). HC10000685 Z-Select 4000D 4” x 1” Perforated between labels 8000T Primary Blood Bag A 7.9 mil matte white polypropylene thermal transfer label with an FDA 175.105 compliant freezer-grade acrylic adhesive. Service temperature 65° F to 140° F (-54° C to 60° C). Primary Blood Bag Label 4” 8000T Blood Bag A 7.7 mil matte white polypropylene thermal transfer label with an acrylic adhesive. Service temperature -40° F to 250° F (-40° C to 121° C). 2” 0.75” 2” 3” 4” For more information on: • Custom Sizes • Pre-Printing • Other Healthcare Products Contact Zebra at +1 866 230 9495 ©2006 ZIH Corp. All rights reserved. HC10000629 HC10000688 8000T Blood Bag 8000T Primary Blood Bag 2” x 3” Perforated between labels 4” x 4” With corner face slit Zebra IV and blood bag products have been evaluated for compliance with 21 CFR 175.105. It is the user’s responsibility to ensure the safety of this product’s use for their specific application. HEADQUARTERS Zebra Technologies International, LLC T: +1 847 793 2600 or +1 800 423 0442 F: +1 847 913 8766 ADDRESS: 333 Corporate Woods Parkway, Vernon Hills, IL 60061-3109 U.S.A. WEB: www.zebra.com OTHER LOCATIONS USA: California, Rhode Island, Wisconsin EUROPE: France, Germany, Italy, Netherlands, Poland, Spain, Sweden, United Kingdom ASIA-PACIFIC: Australia, China, Japan, Singapore, South Korea LATIN AMERICA: Florida (USA), Mexico AFRICA/MIDDLE EAST: South Africa, United Arab Emirates An ISO 9001 registered company GSA #: GS-35F-0268N ©2006 ZIH Corp.
