Download Pioneer DVR-K15VA
Transcript
MIoneer sound. vision.sou/ DVD+ R/RW Slim Writer 12.7mm Height Slim DVR-K15 DVR-KOS | Drawer Loading Type | | Slot Loading Type | = q E 8X8 Writing Speed DVD+R 8X DVD+R, 6X DVD-RW, 8X DVD+RW, 24X CD-R, 24X CD-RW E Low Power Consumption : 4.8W at DVD-R 8X Writing (Industry leading low power consumption) EH 4X DVD Dual/Double Layer Support . . in spee performance 4X DVD+R DL, Maximum 8.5Gbyte Recording E Multi Effect Liquid Crystal Compensator — Tilt Compensator Ideal Laser Focus Tilted Disc With Tilt Compensator Beam spot Beam spot Beam spot (e ЦЕТЫ cales on disc Liquid Crystal Compensator Because the lengths of the left and If the disc is warped or its thickness is Forms a beam spot that is uniform on right beams are equal, the focal point uneven, it cannot form a precise beam both sides. achieving accurate writin is accurate. spot, preventing accurate writing. ’ 9 9. — Thickness Compensator Ideal Writing Situation Without Thickness Compensator With Thickness Compensator Double layer disc cross section + sn ses > Double layer disc * > 2nd layer(L1) > . >. Single layer disc / ,, Cross section Be. >. cross section pe MN st layer(L0) "eue ma.‘ 2nd layer(L1) x у te Fes CE [с * ale УШУ Disc Va = “se “he A Disc £ 3 1st layer(L0) ens PP cs optical pickup design will focus Standard optical pickups optimize Lens Cn o ; AL ; writing to single layer disc therefore Го The Liquid Crystal Compensator makes it possible light to a pinpoint on the disc surface, ; ; Oo" L o ; cause spherical aberrations when to focus light to a pinpoint regardless of the disc's regardless of single or double layer , ; ; - A : structure. attempting to write double layer disc. single or double layer structure, avoiding spherical Liquid Crystal Compensator aberration, allowing for accurate writing. — Astigmatism Compensator With Astigmatism Compensator * Optical Distortion 7 * Astigmatism = Beam Spot Corrects other issues that cause misalignments of the beam spot. => The Liquid Crystal Compensator is an ideal solution for irregularly curved, thin/thick, and double layer Before After discs. E Pioneer's Superior Mechanism — Twin Printed Coil Actuator on Pick-Up Industry leading 0.1g design allows for lightweight optical pickup, which in turn allows for high maneuverability and low power consumption. — OPU Cooling Function Built in temperature sensor monitors the cooling requirements of the pickup laser. When temperatures rise, the drive automatically stops writing operation for cooling, and restarts writing operation to maintain high media write quality and drive reliability. — Stepping Motor The use of a stepping motor allows for highly accurate and reliable sled drive operation, along with quiet seek operation. Twin Printed Coil E Performance Adjusting Firmware Automatically adjusts between Performance mode and Quiet mode. Achieves an ideal solution by lowering disc rotation for quieter drive performance during DVD Video and Audio CD playback, while speeding up for high performance when required. *Patent pending DVR-K05 Loading Image Diagrams Loading Start Position Loading End Position Eject End Position Main Cam Guide Arm — Hold Arm Eject Arm — Link Arm Load Arm { Guide 21mm + Media Motor Support 66mm Method to Eject End Position Specifications Items Specifications Support Media (Read) DVD-ROM(Single Layer and Dual Layer), DVD-R, DVD-RW, DVD+R, DVD+RW DVD-R DL, DVD+R DL, DVD-RAM, (DVD-Video), CD-ROM(Mode 1, Mode 2), CD-R, CD-RW, Photo CD, CD Extra, CD TEXT Support Media (Write) DVD-R (Ver. 2.0 for General), 4X-Speed DVD-R, 8X-Speed DVD-R, DVD-RW (Ver. 1.0, Ver. 1.1 & Ver. 1.2), 2X-Speed DVD-RW, 4X-Speed DVD-RW, 6X-Speed DVD-RW DVD+R, 4X-Speed DVD+R, 8X-Speed DVD+R, DVD+RW, 4X-Speed DVD+RW, 8X-Speed DVD+RW, DVD-R DL, DVD+R DL, CD-R, Ultra Speed + CD-RW, Multi-Speed CD-RW, High-Speed CD-RW, Ultra- Speed CD-RW *DVD-RAM is not supported. Interface ATAPI, ATA-5 (PIO Mode4, Multi-Word DMA Mode2, Ultra-DMA Mode2) Write Speed DVD-R 8X Zone-CLV, DVD-RW 6X Zone-CLV, DVD+R 8X Zone-CLV, DVD+RW 8X Zone-CLYV, DVD-R DL 4X Zone-CLV, DVD+R DL 4X Zone-CLV, CD-R 24X Zone-CLV, CD-RW 24X CLV (Ultra Speed CD-RW) Read Speed DVD-ROM 8X, DVD-R/RW/+R/+RW 8X, DVD-R DL/+R DL 6X, CD-ROM/R/RW 24X Data Transfer Rate 10,800 KB/sec (DVD-ROM Single Layer 8X CAV Read) 3,600 KB/sec (CD-ROM 24X CAV Read) 10,800 KB/sec (DVD-R, DVD+R/+RW 8X Z-CLV Write) 8,100 KB/sec (DVD-RW 6X Z-CLV Write) 5,400 KB/sec (DVD-R/RW, DVD+R/+RW, DVD-R DL, DVD+R DL 4X Z-CLV Write) 2,700 KB/sec (DVD-R/RW, DVD-R DL 2X CLV Write) 3,240 KB/sec (DVD+R/+RW 2.4X CLV Write) 3,240 KB/sec (DVD+R DL 2.4X CLV Write) 3,600 KB/sec (CD-R 24X Write), 3,600 KB/sec (USCD-RW 24X Write) Random Access Time DVD: 150msec. typ. CD: 130msec. typ. Data Buffer 2MB Mounting Orientation Horizontal & Vertical Dimension 128W x 12.7H x 127D (DVR-K15), 128W x 12.7H x 129D (DVR-K05) Weight 190g (DVR-K15), 180g (DVR-K05) The specifications and appearance are as of Mar 2005. The specifications and appearance are subject to change without notice. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan TEL: +81-3-3495-9924 FAX: +81-3-3495-9973 PIONEER ELECTRONICS(USA)INC.INDUSTRIAL SOLUTIONS BUSINESS GROUP 2265 East 220th Street, Long Beach, CA90810, USA TEL: +1-800-444-6784 FAX: +1-310-952-2990 PIONEER EUROPE N.V., MULTIMEDIA DIVISION Pioneer House, Hollybush Hill, Stoke Poges, Slough SL2 4QP, UK TEL: +44-1753-789-789 FAX: +44-1753-789-880 PIONEER ELECTRONICS ASIACENTRE PTE.LTD 253 Alexandra Road, #04-01 Singapore 159936 TEL: +65-6472-1111 FAX: +65-6472-1611 PIONEER (HK) LTD Suites 901-6, 9/F, World Commerce Centre, Harbour City, 11 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2848-6488 FAX: +852-2530-4896 PIONEER CHINA HOLDING CO., LTD 18/F, New Hua Lian Mansion (West), 775 Huai Hai Zhong Rd., Shanghai 200020, P.R. China TEL: +8621-6431-4466 FAX: +8621-4525-4526 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: 1 300 666 383 FAX: (03) 9580 9698 PIONEER HIGH FIDELITY TAIWAN CO., LTD 13FL, No.44, Chung Shan North Road, Sec.2, Taipei, R.O.C. TEL: +886-2-2521-3588 FAX: +886-2-2511-488
Related documents