Transcript
y 1 2 3 ltem-No. 235112 SCALE 1/2 Specification Material : 1. Top & Bottom Case : ABS, UL 94V—0. 2. RJ45 Jack Housing : PBT+15%GF, UL 94V-0. 3. RJ45 Jack contact material & finished : 5—1. Phosphor Bronze with 50-60 micro—inch Nickel plated. 3—2. Contact area : Min. 3mm 50 micro—inch Gold plated. 4. IDC Housing : PC+5%GF, UL 94V—2. 2. IDC Terminal : 5—1. Phosphor Bronze with 50—60 micro—inch Tin plated. 5—2. 110 & Krone tool compatible. 5-3. Suitable for 22-26 AWG stranded and solid wire. 6. Screw : M2.0x6.0x293.3mm. PCB : FR4, 2Layer, UL 94V—0. 8. Screw : M3.5x16.0x26.0mm. > Performance : a. The IDC color codes combine two wirings of 1568A & T568B. b. Operation temperature : —10°C to 65°C. c. Durability : c—1. Jack : 750 cycles Plug—Jack mating and unmating test, insertion cycles at 20 cycles/minute max. Contact resistance test per 100 cycles. c—2. IDC : Max. 200 punching times. d. The Cat.5e performance is in compliance with the ANSI/TIA/EIA 568 B.2 standard. SCALE 1/2 SCALE 1/2 GENERAL TOLERANCE OF DIMENSIONS X.XXX +£+0.005 X.XX $0.05 X.X $0.1 & equip Outlet UTP Cat.5e, surface mounted, 2-Port DRAWING NO. | DRAWING CLASSIFICATION | S |SHEET| 1 OF 1 N 2 0 3 10cm 9 6