Transcript
S P E F C I L E ET-PKB80 Ceiling mount bracket for high ceilings Description This ceiling mount bracket is to be used when mounting LCD projectors to the ceiling. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W x H x D): Weight: +20°, -5° ±10° ±5° 374 x 400 – 480 x 211 mm (14-23/32˝ x 15-3/4˝–18-29/32˝ x 8-5/16˝) 2.8 kg (6.2 lbs) Weights and dimensions shown are approximate. Specifications subject to change without notice. Parts Attachment plate . . . . . Projector mount bracket Adjuster pole A . . . . . . Adjuster pole B . . . . . . Angle adjuster A . . . . . Angle adjuster B . . . . . Holding bracket A . . . . .. . .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 1 Holding bracket B . . . . . . . . . . . . . . . . . . . . . 1 Washer-fitted hexagonal bolts (M6 x 12) . . . 19 Washer-fitted screws (M4 x 10) . . . . . . . . . . . 6 Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . 2 Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Caution: • • • • • All mounting work must be done by a qualified technician. Ensure that the mounting (ceiling) area has sufficient strength. Read the enclosed mounting instructions carefully before starting the mounting procedure. Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool should be used. When the system is no longer to be used, have a qualified technician promptly remove and dispose of it. Dimensions 357– 437 (14-1/16˝–17-7/32˝) (Adjustable in 20 mm (25/32˝) steps) Illustration shows the ET-PKB80 attached to the projector. Attachment plate ø49 3- Ø9.5 (3/8˝) (1-15/16˝) 100 (3-15/16˝) 150 (5-29/32˝) (1-11/16˝) 130 (5-1/8˝) ø43 116 (4-9/16˝) Ø8.5 (11/32˝) 110 (4-11/32˝) Projector 140 (5-/12˝) 70 (2-12/16˝) 160 (6-5/16˝) 65 (2-9/16˝) 374 (14-23/32˝) 20 (25/32˝) 81 (3-3/16˝) 96 (3-25/32˝) 370 (14-9/16˝) Attachment plate unit : mm (inch) NOTE: This illustration is not drawn to scale. As of April 2008 < 1 >
