Download Supermicro 6015C-MTB

Chapter 5: Advanced Serverboard Setup
Overheat LED (OH)
OH/Fan Fail LED
Pin Definitions (JF1)
Connect an LED to the OH connection
on pins 7 and 8 of JF1 to provide advanced warning of chassis overheating. Refer to the table on the right for
Pin#
Definition
7
Vcc
8
Ground
pin definitions.
NIC2 (LAN2) LED
The LED connections for LAN2 are
on pins 9 and 10 of JF1. Attach LAN
LED cables to display network activity. See the table on the right for pin
NIC2 LED
Pin Definitions (JF1)
Pin#
Definition
9
Vcc
10
Ground
definitions.
NIC1 (LAN1) LED
NIC1 LED
Pin Definitions (JF1)
The LED connections for LAN1 are
on pins 11 and 12 of JF1. Attach LAN
LED cables to display network activity. See the table on the right for pin
definitions.
Pin#
Definition
11
Vcc
12
Ground
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach the
hard drive LED cable here to display
disk activity (for any hard drives on the
system, including SAS, Serial ATA and
IDE). See the table on the right for pin
definitions
HDD LED
Pin Definitions (JF1)
Pin#
Definition
13
Vcc
14
HD Active
Power On LED
The Power On LED connector is located on pins 15 and 16 of JF1. This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin definitions.
5-13
Power LED
Pin Definitions (JF1)
Pin#
Definition
15
5V Stby
16
Control