Download Allied Telesis 48-port 10/100/1000T managed Ethernet L3 standalone Switch w/ 4 combo SFP bays, EU power cord
Transcript
Datasheet | Switches AT-9448T/SP 48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP Bays AT-9448T/SP Layer 3 switch with 48 ports 10/100/1000T plus 4 combo SFP bays Product Overview As a member of the 9400 series the AT-9448T/SP is a managed Gigabit Ethernet switch with a 1RU form factor and rich QoS functionality. It is rack-mountable and supports DoS attack protection. The AT-9448T/SP is an ideal choice for small to medium enterprises that need rich QoS functionality and Gigabit connectivity. It offers an extensive set of management features and advanced QoS functionality delivers Layer 2/4 ready traffic management for VoIP networks. A managed Gigabit Ethernet switch the AT-9424T/SP is ready to meet the Gigabit networking needs at the access tier of any organization. Implemented protocols and features are standards-based to ensure ease of management and integration into existing networks. Smarter, More Secure and More Cost-Effective The AT-9448T/SP is a Layer 3 managed Gigabit switch for the access edge that brings enhanced security and intelligence to Gigabit networks. The cost-effective AT-9448T/SP offers advanced attack detection and suppression capabilities for increased security and advanced QoS to support converged applications. The 9400 series provides the perfect solution for: • Traditional Enterprise LAN (wiring closet) • Service-provisioned Leased Offices or MTUs • Security-conscious Government Institutions • Security-conscious Financial Institutions • Cost/security-conscious Educational Institutions Allied Telesis Network QoS and IGMP for Video and Voice-over-IP A rich offering of voice and video networking features is incorporated to ensure support for demanding multimedia networking applications in the enterprise. Converged networking is enhanced with QoS/Cos including eight priority queues for IEEE 802.1p/ToS/DiffServ traffic. The platforms high performance hardware makes latency a non-issue and IGMP implementation on the AT-9448T/SP is capable of transmitting broadcast quality video throughout the enterprise network. Network Security To address the concern of network attacks in the form of Denial of Service (DoS), the AT-9448T/SP, using Layer2-4 intelligence, can be deployed to complement WAN firewalls and PC anti-virus protections to further fortify the network against malicious attacks.The AT-9448T/SP comes pre-programmed to detect six well known DoS attacks and supports security features such as IEEE 802.1x (portbased Network Access Control) and Radius/ TACACS+. Key Features Layer 3 Support • RIPv2 • Static routing • ECMP Performance • • • • • • Throughput 71.242Mpps Switch fabric 96Gbps 4096 VLANs (static and dynamic) 256 static Layer 2 multicast groups 255 dynamic Layer 2 multicast groups 9K jumbo frame support Layer 2-4 Intelligence • Packet inspection and classification at MAC, IP, TCP/UDP layers • Set QoS, ACL, mirroring, and rate-limiting using traffic classes Security • • • • • • DoS attack protection Radius/TACACS+ Port security SSH SSL IEEE 802.1x port-based network access control • Access Control Lists (ACLs) Advanced Services • • • • Rate limiting (ingress and egress) Eight QoS service levels IEEE 802.1p for MAC-based QoS DSCP for IP-based QoS Resiliency • • • • • IEEE 802.1s Multiple STP IEEE 802.3ad link aggregation IEEE 802.1D Spanning-Tree IEEE 802.1w Rapid STP Temperature threshold alert Management • • • • • Telnet Web GUI CLI Dedicated management port Compact flash slot www.alliedtelesis.com AT-9448T/SP | 48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP Bays Hardware Specifications Physical Characteristics Dimensions (H x W x D) 4.4cm x 43.8cm x 30.4cm (1.75” x 17.3” x 12”) Weight 4.61kg (10.15lbs.) Software Specifications Layer 3 Support RIPv1 RIPv2 ECMP Static IPv4 routing (1024 routes) Multicast RFC 1112 RFC 2236 RFC 3376 RFC 2710 RFC 3810 System Capacity 64MB RAM 16MB flash memory 200MHz PowerPC CPU 4096 VLANs 16000 MAC addresses Interface Standards IEEE 802.3 10T and 10FL IEEE 802.3u 100TX and 100FX IEEE 802.3z 1000SX IEEE 802.3ab 1000T Performance Wirespeed switching on all Ethernet ports 14,880pps for 10Mbps Ethernet 148,800pps for 100Mbps Ethernet 1,488,000pps for 1000Mbps Ethernet Ethernet throughput Switch fabric 71.242Mpps 96Gbps Power Characteristics Voltage: 100-240V AC Current: 4.0/2.0A Frequency: 50-60Hz Max power consumption: 120 Watts Environmental Specifications Operating temperature: 0ºC to 40ºC (32ºF to 104ºF) Storage temperature: -20ºC to 70ºC (-13ºF to 158ºF) Operating humidity: 5% to 90% non-condensing Storage humidity: 5% to 95% non-condensing Max operating altitude: 3,048m (10,000 ft) Recommended ventilation on all sides: 10cm (4”) MTBF 250,000 hrs. Electrical/Mechanical Approvals Safety UL 60950-1, CSA C22.2 No. 60950-1-03, EN60950-1, EN60825-2 (TUV) EMI FCC Part 15 Class A, EN55022 Class A, EN55024 Immunity, VCCI Class A, C-TICK, EN61000-3-2, EN61000-3-3, AS/NZS 3548 (Australia/New Zealand) Immunity EN55024 General Standards IEEE 802.1d Bridging IEEE 802.3ac VLAN tag frame extension IEEE 802.3x BackPressure/ flow control Redundancy Static and dynamic port trunking (with six trunk groups and up to eight ports per trunk) IEEE 802.3ad LACP link aggregation IEEE 802.1D Spanning-Tree Protocol IEEE 802.1w Rapid Spanning-Tree IEEE 802.1s Multiple Spanning-Tree Router Redundancy Protocol (RRP) snooping Dual software images, dual configuration files Traffic Management and Quality of Services (QoS) Layer 2, 3 and 4 criteria Flow groups, traffic classes and policies DSCP replacement IEEE 802.1Q priority replacement Type of Service replacement Type of Service to IEEE 802.1Q priority replacement IEEE 802.1Q priority to Type of Service replacement Maximum bandwidth control Burst size control Ingress rate limiting Head of line blocking prevention Support for ingress and egress ports Eight egress queues per port IEEE 802.1p Class of Service with Strict and Weighted Round Robin Scheduling IGMP snooping (v1) IGMP snooping (v2) IGMP snooping (v3) Multicast Listener Discovery (MLD) snooping (v1) Multicast Listener Discovery (MLD) snooping (v2) Management and Monitoring RFC 1157 SNMPv1 RFC 1901 SNMPv2 RFC 3411 SNMPv3 RFC 1213 MIB-II RFC 1215 TRAP MIB RFC 1493 Bridge MIB RFC 2863 Interfaces group MIB RFC 1643 Ethernet-like MIB RFC 1757 RMON 4 groups: Stats, History, Alarms and Events RFC 2674 IEEE 802.1Q MIB RFC 1866 HTML RFC 2068 HTTP RFC 2616 HTTPS RFC 854 Telnet server RFC 1350 TFTP client AlliedTelesis Private MIB IP address allocation: RFC 951 / RFC 1542 RFC 2131 RFC 2030 BOOTP client DHCP client manual SNTP, Simple Network Time Protocol Syslog client Two event logs: 4,000 event capacity in temporary memory 2,000 event capacity in permanent memory Management Access Methods Out of band management (serial port) In-band management (over the network) using Telnet, web browser or SNMP Management Interfaces Menus Command line Web browser SNMP v1/ v2/ v3 Country of Origin Singapore Allied Telesis www.alliedtelesis.com AT-9448T/SP | 48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP Bays Security RFC 1492 RFC 2865 RFC 2866 IEEE 802.1x TACACS+ RADIUS client RADIUS accounting Port-based Network Access Control with multiple supplicants per port ingress and egress control of broadcast, multicast and unknown unicast traffic MAC address security/lockdown Layer 2/3/4/ Access Control Lists (ACLs) 64 ACL profiles 256 rules per ACL profile ACLs based on: • Ethernet frame type • MAC address/VLAN ID/IEEE 802.1p • Layer 2/3 protocol • IP subnet/address/TOS/DSCP • UDP/TCP port/flag SSHv2 for Telnet mgmt SSLv3 for Web mgmt DoS attack protection Smurf SYN flood Teardrop Land IP option Ping of Death SNMP attack Fault Protection Bad cable detection Broadcast storm control AT-9448T/SP-xx Layer 3 switch with 48 ports 10/100/1000T plus 4 combo SFP bays Where xx = 10 20 30 40 50 for for for for for U.S. power cord no power cord U.K. power cord Australian power cord European power cord Accessories Small Form Pluggables (SFPs) AT-SPSX Multi-mode fiber, GbE SFP, 850nm AT-SPLX10 Single-mode fiber, 10km, GbE SFP, 1310nm AT-SPLX40 Single-mode fiber, 40km, GbE SFP, 1310nm AT-SPLX40/1550 Single-mode fiber, 40km, GbE SFP, 1550nm AT-SPZX80 Single-mode fiber, 80km, GbE SFP, 1550nm AT-SPZX80/xxxx Single-mode fiber, CWDM, 80km GbE SFP xxxx = CWDM wavelengths: 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Redundant Power Supply AT-RPS3204 Chassis for up to four redundant power supplies (chassis includes one power supply and one cable) AT-PWR3202 Additional 200W redundant power supply with cable USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11 Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830 www.alliedtelesis.com © 2008 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000206 Rev. C