Download Supermicro PDSG4

PDSG4/PDSGE User's Manual
Power On Function
This setting allows the user to decide which method to use to power on the system.
The options are Password, Hot Key, Mouse Left, Mouse Right, Any Key, Button
Only and Keyboard 98.
KB Power On Password
This setting allows the user to enter a password to power on the system. Key in
a password and press <Enter>.
4-4.4
PCI/PnP Configuration
Choose PCI/PnP Configurations from the Award BIOS main menu with the Left/
Right arrow keys. You should see the following items displayed:
Onboard LAN Boot ROM
Select Enable to boot from LAN. The options are Disabled and Enable.
Initial Display First
This feature sets the device that will initiate the monitor display when the system is
first turned on. The options are PCI Slot and PCIEx(press).
Reset Configuration Data
Enabling this setting resets the extended system configuration data when you exit
setup. Do this when you have installed a new add-on and the system reconfiguration
has caused such a serious conflict that the OS cannot reboot the system. The
options are Enabled and Disabled.
Resources Controlled By
This setting allows the BIOS to automatically configure all boot and Plug and Play
compatible devices. If you choose Auto, you cannot select the IRQ, DMA and
memory base address fields, because the BIOS automatically assigns them. The
options are Auto (ESCD) and Manual.
PCI Optional ROM
Set to Enabled to allocate BIOS resource for the use of a selected PCI slot. The
options are: Enabled and Disabled.
PCI-X Slot Frequency
This setting allows the user to set PCI- slot frequency. The options are: PCI-33 (MHz),
PCI-66 (MHz), PCIX-66 (MHz), PCIX-100 (MHz), and PCIX-133 (MHz).
PCI Express Root Related Items
Maximum Payload Size
This setting allows the BIOS to set the maximum TLP Payload size for the PCI
Express devices in the system. The options are: 128 (bytes), 256 (bytes), 512
(bytes), 1024 (bytes), 2048 (bytes), and 4096 (bytes).
4-8