Download Intermec Universal Power Supply

CK3
RFID-Ready Snap-On Adapter
Accessory Name
Part Number
Description
IP30
Part Number
available in August
Snaps onto the bottom of CK3 Series
devices as a passive UHF RFID handle.
Accessory Name
Part Number
Description
Single Dock
871-228-001
USB Host and Client Support with bay
for charging an auxiliary battery pack.
Requires Power Supply 851-061-207 and
country specific AC power cord. Optional:
Single Dock Ethernet Modules.
Multi-Dock, Ethernet
871-229-002
4-slot Ethernet dock provides extra
port allowing for ability to link up
to three (3) multi-docks. Requires
Power Supply 851-064-006 and
country-specific AC power cord.
871-229-001
Allows for charging up to 4 devices.
Requires power supply 851-064-006 and
country specific power cord.
Vehicle Dock
871-231-001
Securely holds CK3 and provides
power. Cabled RS232 (5V pwr on
pin 9) or USB Host support is also
available. Requires use of Intermec
RS232 Serial cable (p/n 225-737-001) or
Intermec USB cable (VE011-2016).
The CK3 Series vehicle dock uses the same
mounting system (p/n 805-611-001) and
vehicle power kits (p/n 851-065-105) as
the CN3 & 700 Series vehicle dock.
Non-Powered Vehicle Holder
871-236-001
Securely holds CK3.
IP30 Vehicle Holder
871-237-001
Non-Powered vehicle holder to
hold CK3 with IP30 attached.
871-025-101
CK3 Series Ethernet Module interfaces with
USB Host connector on Single Dock.
Accessories Guide
Docks and Modules
(Photo Pending)
Multi-Dock, Charge Only
(Photo Pending)
(Photo Pending)
Single Dock Ethernet Module
(Photo Pending)
CK3
Accessories Guide
Holsters & Handles
Accessory Name
Part Number
Description
Standard Belt Holster –
no handle
825-198-001
Rugged lightweight holster with belt
designed for use with handheld applications
where scan handle is not required.
Standard Belt Holster –
with handle
825-199-001
Rugged lightweight holster with
belt designed for use with handheld
applications requiring a scan handle.
Scan Handle
203-879-001
Customer installable scan handle
(replaces the hand strap).
Accessory Name
Part Number
Description
Snap-On RS-232 Adapter
850-815-001
Enables RS232 support from bottom
of CK3. Must order cables separately.
Adapter provides DB9M connector and 5V
power on pin-9 for tethered scanners.
850-816-001
Provides 3.5mm standard audio
jack for use of wired headset.
850-817-001
Recommended for in-field charging solutions
not requiring vehicle dock. Supports
use of auto power charger 852-043-003
or AC power supply 851-065-105.
Snap-On Adapters
(Photo Pending)
Snap-On Audio Adapter
(Photo Pending)
Snap-On Power Adapter
(Photo Pending)
2
CK3
Accessories Guide
Batteries & Chargers
Accessory Name
Part Number
Description
Standard Capacity
Battery Pack
318-033-001
One (1) rechargeable 7.4 watt hours (2000
mAh) standard battery pack for the CK3.
Extended Capacity
Battery Pack
318-034-001
One (1) rechargeable 18.5 watt hours (5100
mAh) extended battery pack for the CK3.
Quad Battery Charger
871-230-001
Charges four CK3 Series battery packs.
Requires Power Supply 851-061-207 and
country-specific AC power cord. Charges
both standard and extended batteries.
Accessory Name
Part Number
Description
USB-A to USB-microB, 1M
236-209-001
Use with CK3 Series Single Dock
(871-228-001) or Vehicle Dock USB
Adapter Cable for ActiveSync (VE011-2016)
connection to PC USB port.
Cables
Power Supplies & Adapters
3
Accessory Name
Part Number
Description
Universal Power Supply,
12VDC, Output
851-064-006
Use with CK3 Series Multi-docks
(871-228-001 & 871-028-002). Order
country-specific AC power cord separately.
Universal Power Supply,
12VDC/30W, Output
851-061-207
Use with CK3 Series Single Dock
(871-228-001) or CK3 Series Quad Battery
Charger (871-230-001). Order countryspecific AC power cord separately.
CK3
Power Supplies & Adapters (continued)
Accessory Name
Part Number
Description
Universal Power Supply, 5V
851-065-105
AC power supply with barrel jack. Allows
charging of CK3 Series devices without a
dock. Requires use of CK3 Series Snapon Power Adapter (850-557-001). Order
country-specific AC power cord separately.
Auto Power Adapter
852-043-003
For use with Cigarette Lighters. Barrel jack
that allows charging of CK3 handheld.
Requires use of CK3 Series Snap-on
Power Adapter (850-557-001).
Accessory Name
Part Number
Description
Cable Retainer
Replacement Kit
203-810-001
Contains five (5) sets of Cable Retainers
used to secure USB connections.
Screen Cleaner Kit,
Pre-Moistened Wipes
346-065-101
Includes 24 pre-moistened, nonabrasive, non-streaking 4”x7” wipes.
Screen Protector,
10 Each
346-069-107
Contains ten (10) self-adhesive
screen protectors.
Accessories Guide
(Photo Pending)
Replacement Parts
Copyright © 2008 Intermec
Technologies Corporation. All
rights reserved. Intermec is a
registered trademark of Intermec
Technologies Corporation.
All other trademarks are the
property of their respective
owners. Printed in the U.S.A.
611895-02A 07/08
4