Download LG 42PX4RV plasma panel

Operation
ENGLISH
Screen Menu Options
Auto Configure
- Automatically adjusts picture position and minimizes image shaking.
- This function works in the following mode : RGB[PC].
1. Press the MENU button and then use
2. Press the
G
button and then use
D
D
E
button to select the SCREEN menu.
button to select Auto config..
E
/
/
3. Press the G button to start Auto config..
• When Auto config. has finished, Ok will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment again.
4. If picture needs to be adjusted more after Auto adjustment in RGB (PC), you can adjust
the Manual Config..
STATION
PICTURE
SOUND
TIME
SPECIAL
Auto config.
config.
Auto
Manual config.
VGA Mode
ARC
Zoom +/Position
Cinema
NR
Reset
G
To set
SCREEN
PIP/DW
Menu Prev.
5. Press the EXIT button to return to normal TV viewing.
- Although the image is still not correct, your set is functioning properly but needs further adjustment.
- The Auto config. functions don’t need to be run for HDMI mode.
Manual Configure
- If the picture isn’t clear after auto adjustment and especially that characters are still trembling, adjust the picture
phase manually.
- To correct the screen size, adjust Clock.
- This function works in the following mode : RGB[PC], RGB[DTV], COMPONENT (480p/576p/720p/1080i), HDMI
(480p/576p/720p/1080i).
- It’s not available to use Phase, Clock function in RGB[DTV], COMPONENT (480p/576p/720p/1080i), HDMI
(480p/576p/720p/1080i) mode.
1. Press the MENU button and then
2. Press the
G
button and then
D
/
3. Press the
G
button and then
D
/
D
E
E
/
E
button to select the SCREEN menu.
button to select Manual config..
button to select Phase, Clock, H-Position or
STATION
PICTURE
SOUND
TIME
V-Position.
SPECIAL
4. Press the
F
/
G
button to make appropriate adjustments.
5. Press the EXIT button to return to normal TV viewing.
Auto config.
Manualconfig.
config.
Manual
VGA Mode
ARC
Zoom +/Position
Cinema
NR
Reset
G
Phase
0
Clock
0
H-Position
0
V-Position
0
SCREEN
PIP/DW
Menu Prev.
Selecting Wide VGA/XGA mode
- To see a normal picture, match the resolution of RGB mode and selection of VGA/XGA mode.
- In some models, it’s not available to selection of XGA mode.
- This function works in the following mode : RGB[PC].
1. Press the MENU button and then use
2. Press the
G
button and then use
D /E
3. Press the G button and then use D
/E
button to select the SCREEN menu.
STATION
button to select VGA Mode (or XGA Mode).
PICTURE
D /E
button to select the desired VGA/XGA resolution.
SOUND
TIME
4. Press the EXIT button to return to normal TV viewing.
SPECIAL
Auto config.
Manual config.
Mode
VGA Mode
ARC
Zoom +/Position
Cinema
NR
Reset
G
640x480
848x480
852x480
SCREEN
PIP/DW
Menu Prev.
Owner’s Manual 29