Transcript
Data sheet: LN-228 LN-228 Network Cable Plugs 8716502004829 6/24 2 gr. 20 (H) x12 mm(W). 90 gr. 150 (W) x 225(H) x 2,5 mm (D) 700 gr. 190 (W) x 163 (D) x 300mm (H) 3,5 Kg. 320 (W) x 310 (D) x 275 mm (H) These RJ45 connectors are standard Ethernet connectors for use in home or office networks. By attaching the connectors to UTP cable*, you can create patch cables for interconnecting your PCs and other network devices.* Use an RJ45 Crimping tool to secure connectors (LN-225/LN-224) Network Cable Plugs - 10x Change your UTP cable into ready-to-use patch cables. Materials and Finish: Contact: Phosphor bronze, selective gold plated in contact area over 100 micro-inches nickel plated. Housing: Polycarbonate, UL94V-0, UL94V-2 Shield: Nickel plated, brass Electrical Characteristics: Current Rating: Voltage Rating: Dielectric withstanding: Insulation Resistance: Contact Resistance: 1.5 Amps 30 VAC/42 VDC 1000V Rms, 1 min, (60HZ) 500 Megohms. Min 20 Milliohms. Max. Meets EIA/ TIA TSB 40-A test performance Dual point contact terminates 24-26 ASW stranded & solid conductors Available in non-shielded and shielded configurations to control EMI/RFI Speeds up to 100MHZ P. 1.1.
