Transcript
Memory Module Specification KVR400S4R3AK2/1G 1GB (512MB 64M x 72-Bit x 2 pcs.) DDR400 CL3 Registered ECC 184-Pin DIMM Kit (2 pcs.) DESCRIPTION: ValueRAM's KVR400S4R3AK2/1G is a kit of two 64M x 72-bit (512MB) DDR400 CL3 SDRAM (Synchronous DRAM) "single rank" Registered ECC memory modules. Total kit capacity is 1GB (1024MB). The components on each module include eighteen 64M x 4-bit (16M x 4-Bit x 4 bank) DDR400 SDRAM in FBGA packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical specifications are as follows: FEATURES: Clock Cycle Time (tCK) Row Cycle Time (tRC) Refresh Row Cycle Time (tRFC) Row Active Time (tRAS) Single Power Supply of Power UL Rating 5ns (min.) / 10ns (max.) 55ns (min.) 70ns (min.) 40ns (min.) / 70,000ns (max.) +2.6V (+/- .1V) 5.850 W (operating per module) 94 V - 0 Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.200" (30.48mm). 5.25 ± 0.005 (133.350 ± 0.13) 0.118 (3.00) 5.171 (131.350) 5.077 (128.950) A B A B 0.100 Min (2.50 Min) (2.30 Min) 0.393 (10.00) 0.78 (19.80) 0.7 (17.80) 1.2 (30.48) 0.0787 R (2.00) (0.157) (4.00) 0.157 Max (3.99 Max) Figure 1: KVR400S4R3AK2/1G 184-Pin DIMM Document No. VALUERAM0447-001.A00 0.050 ± 0.0039 (1.270 ± 0.10) 06/22/05
