Transcript
Specification sheet Conceptronic SnapPort network card for notebooks CSP100TCL Connect a notebook to a 10/100Mbps network This PC Card automatically recognizes the speed of the network and can switch back to 10 Mbps when used for a 10 Base-T network. The SP100TCL is suitable for all notebooks that support 32 bits card bus. The PC-Card only uses 3,3 V in comparison to a regular PC Card which uses 5 V. Specifications General specifications: • Type II PCMCIA PC-Card (32 bit) • Compliant with IEEE 802.3 & IEEE 802.3U standard. • 10Base-T/100Base-TX LAN auto select. • LED indicators: 10/100/ACT • Built in 32 kB high speed • SRAM for data buffering • Low power consumption (3,3V) • Supports wake up on LAN • NE-2000 compatible. • "Full Duplex" support. • Drivers: - Novell Netware - Netware Lite - Microsoft LAN manager - Microsoft Windows for Workgroups, Windows 95/98/ME/2000/XP, Linux and Windows NT 4.0 • • • • • NetBIOS Banyan Vines 5.5 Lantastic IBM OS/2 Warp 3.0 Packet driver application Included accessories: • Multi language manual Minimum system requirements: • Celeron/Pentium II 300Mhz Available PC-Card slot type II or III Warranty: 5 year
