Transcript
Memory Module Specification KVR333X64C25K2/512 512MB (256MB 32M x 64-Bit x 2 pcs.) DDR333 CL2.5 184-Pin DIMM Kit DESCRIPTION: ValueRAM's KVR333X64C25K2/512 is a kit of two 32M x 64-bit (256MB) DDR333 CL2.5 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 512MB. The components on each module include nine 32M x 8-bit (8M x 8-bit x 4 Bank) DDR333 SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.5V. The electrical and mechanical specifications are as follows: FEATURES: Clock Cycle Time (tCK) Row Cycle Time (tRC) Refresh Row Cycle Time (tRFC) Row Active Time (tRAS) Single Power Supply of Power (IDD0) UL Rating 6ns (min.) / 12ns (max.) 60ns (min.) 72ns (min.) 42ns (min.) / 70,000ns (max.) +2.5V (+/- .2V) 1.800 W (operating) 94 V - 0 Note: The module defined in this data sheet is one of several configurations available under this part number. While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here. However, in no configuration will the module height exceed 1.250" (31.75mm). Units : Inches (Millimeters) 1.200 1.250 (30.48) (31.75) (17.80) 0.700 0.393 (10.00) 0.250 (6.350) 0.157 (4.00) 0.1496 (3.80) 2.175 0.071 (1.80) 0.100 0.26 (6.62) (2.50 ) 2.886 (73.30) 5.250 (133.35) 1 0.000 (00.00) 0.000 (00.00) 0.118 (3.00) 0.039 ± 0.002 (1.000 ± 0.050) 0.0787 (2.00) 0.0078 ±0.006 (0.20 ±0.15) 0.050 (1.270) 0.1575 (4.00) Figure 1: KVR333X64C25K2/512 184-Pin DIMM Document No. VALUERAM0309-001.A00 07/24/03
