Download LUXCAM PTZ2
Transcript
Congratulations on your purchase of this product. EN IT FR 000 SFE DE ok 0 ES 95500 — LUXCAM USER MANUAL © Read this manual carefully and keep it in a safe place for future reference. This manual contains proprietary information, protected by copyright. All rights reserved. © Copyright 2015 Luxcam S.A. TABLE OF CONTENTS Device layout Package contents System requirements Product features Hardware installation Software installation Technical specifications 11 DEVICE LAYOUT Light в. Sensor Cer < N mo 8 O 8 Lens ох 70 OoQ- | = IR LED Microphone > Micro SD LA Status light State 1 7 SN Ethernet port WiFi Reset Status light Power led State 2 Ethernet PACKAGE CONTENTS Unpack carefully. Electronic components can be damaged if improperly handled or dropped. The package should contain the following items. If anything is missing or appears damaged, contact your dealer immediately. 1.1. Packing list - Cloud camera - Ethernet cable - Power adapter (5V) - Quick install guide - Installation kit (Bracket) - Wireless antenna «Warranty card Note: Please use only the power adapter supplied with the Luxcam otherwise the product may be damaged. SYSTEM REQUIREMENTS 9. Available on the ее LISO » & O € Smartphone/Tablet: Browser support: - IOS 5.0 and later; -Internet Explorer 7 and later; - Android 2.1 and later. -Firefox 3.5 and later; -Safari 4 and Chrome 8.0 and later. 10/100 mbps ethernet or WiFi network connected to internet (for remote internet access) PRODUCT FEATURES > 3 EE mm a SP RBH © = - Pan-tilt, 350° 95 ° rotation. В 7 - Built-in ir led, 10 meters. - Auto day/night. Ir cut filter. - Built-in WiFi module for local wireless access. - Max. support 32 gb microsd card storage. - PoE (power over internet). - Motion detection. - Push notifications (alarm photo/videorecording and external input/output alarm). - Same encryption protection used by financial industry, (using rsa/dh/des/md5/sha/crc/base64 encryption algorithm). - Qr code, each machine has a unique id and password for easy setup. - Multi-user access. - 2way voice intercom, telecommunication level of signal processing (echo cancellation,noise suppression, voice balance). - Intelligent transmission technology (adaptive bandwidth, dynamic code rate adjustment, voice priority, jitter buffer). - P2p technology / plug and play / scan to go. No configuration needed (port mapping, dns, ip address settings). - Realtime video monitoring / framerate. (25 f/s - 720p). - Display resolution — HD real-time 1280 x 720 px, normal 640 x 360 , half 320 x 180, small 160 x 90. - H. 264 video stream, suitable for local and cross-platform internet access. BRACKET INSTALLATION CONTENTS INCLUDED: - Main bracket body - Adjustable swivel head - Screws A) Choose the suitable spot (wall or ceiling). B) Attach the bracket to the wall or ceiling and secure appropriately using the screws provided. HARDWARE INSTALLATION 4 3 2 1 | | ))) <= lun Turn on the camera, connect ethernet cable and the wireless antenna shown above. Wait 50 seconds, STATE2 will flash green 3 times every 3 seconds. The camera is now connected. For alarm in/out examples please visit luxcam.eu/support SOFTWARE INSTALLATION Use your smartphone or tablet to download the LUXCAM app. © pe Ty 9. Available on the b у “ App Store For computer use please visit luxcam.eu and download the webapp manual. 1- Use Luxcam as an interphone or babyphone Turn on Luxcam. Use your smartphone or tablet to download the LUXCAM app from the app store. Connect your smartphone or tablet to the Wi Fi network of the LUXCAM (example : “ipc1jfiehfgdk3ik”). Using LUXCAM app, scan the QR code found in the camera (Username: same as SSID / default password : admin) 2 - Connect Luxcam to your router with an ethernet cable for first setup. © Click 'Sign up' e Click 'Add device' © QR code to add device PT > 9:17 E nl > 9:17 © K D Exit O Set video size 4 Auto Smal I[ 160X90] Half [ 320X180] no al Ds oo Le = Device List] Set password Device list is empty comme Remember равного Е | > 3 - Connect to router using WiFi QPress the camera, Click'Settings' @ select'Network' € SelectWi-Fi', choose ” Client © or eA ANE с : RE nll > 9:17 om ( Done] Settings Network Network 2015 08 10 14:40 18 ; | n Product info Network interface Select network Fall а Nickname С а С 3 ! Ethemet RDWIFI (Quality: 100% ZOLeZ:E ÓN 2015 05 10 Ta 44:22 Password Pra Status Password 00000009 OSD = Sete pee) Enabled "= > IP S — MAC address 7c:dd:90:0e:5b:39 E > Use DHCP ; SDCard = ; Network status Normal IP address 192.168.20.102 Alert device Alarm action Wireless M ode Gateway 192.168.20.1 Net k . . . Time/Date etwork mase 255.255.255.0 System Hotspot DNS Note: In order to protect your privacy, please change default security settings (admin/password). 10 TECHNICAL SPECIFICATIONS Image sensor Sensor Resolution Lens Min. illumination Perspective Video Video Compression Frequency Frame Rate Image Resolution White balance Backlight compensation Night Vision Network Ethernet Protocol Wireless IP address Other PTZ rotation LED indication Size(L*W*H) Weight Certificates 1/4" CMOS sensor HD 1280 * 720 pixels f:3.6mm, f:2.0 0.5 lux 609 H.264 50Hz, 60HZ 1-30fps 1280*720,640*360 ,320*180,160*90 Automatic Automatic 12 IR LEDs, IR distance: 10 meters 10/100Mbps RJ-45 Interface TCP/IP, UDP/IP, HTTP, SMTP, FTP, DHCP, DDNS, UPNP, RTSP, RTMP, MUTP WIFI(IEEE802.11b/g/n) Static IP address, dynamic IP addresses Horizontal: 350 * & Vertical: 120 ° Power / network signal / function 115(L) *115(W) *135mm(H) 500g(With bracket) RoHS, CE,FCC Audio Input / Output Audio compression Alarm Alarm Detection Alarm Notification Hardware Interface Memory card Power suply Audio Button Wireless Environment Operating Temperature Humidity Storage temperature Built-in mic and speaker AAC Motion Detection Pushup notifications Micro SD card (supports up to 32GB) DC 5V/2.0A power consumption < 8W Output 3.5mm jack, audio input jack 3.5mm A reset button, a function button. WiFi external antenna. 0° ~ 55°C (32°F - 131%) 10% ~ 80% RH(No condensation) -10°C ~ 60° (14°F ~ 140°F) 11 LUXCAM Stay close to what you love www.luxcam.eu CE FCS RoHS