Download Lenovo ThinkPad T450s
Transcript
Your computer comes with a built-in wireless network card and a configuration utility to help you establish wireless connections and monitor the connection status. This enables you to stay connected to your network while you are at the office, in a meeting room, or at home, with no need for a wired connection. To establish a wireless LAN connection, do the following: • For Windows 7: 1. Press the wireless-radios control key the wireless feature. and follow the instructions on the screen to enable 2. Click the wireless-network-connection-status icon in the Windows notification area. A list of available wireless networks is displayed. 3. Double-click a network to connect to it. Provide required information if needed. • For Windows 8.1: 1. Move your pointer to the bottom of the screen to display the taskbar, and then click the wireless-network-connection-status icon. A list of available wireless networks is displayed. Note: To display the list, ensure that airplane mode (flight mode) is set to off. 2. Double-click a network to connect to it. Provide required information if needed. If you need to connect to different wireless networks in different locations, use the following software to manage multiple network profiles so that the computer automatically connects to an available network when the location changes: • For Windows 7: Use the Access Connections program. For more information, see “Accessing Lenovo programs on the Windows 7 operating system” on page 14. • For Windows 8.1: Open the Lenovo Settings program and click Location Awareness. For more information, see “Accessing Lenovo programs on the Windows 8.1 operating system” on page 15. Tips for using the wireless LAN feature To achieve the best connection, use the following guidelines: • Place your computer so that there are as few obstacles as possible between the wireless LAN access point and the computer. • Open your computer lid to an angle of slightly more than 90 degrees. • If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature can be degraded. Checking the wireless-LAN connection status You can check the wireless-LAN connection status through the wireless-network-connection-status icon in the Windows notification area. The more bars encompassed, the better the signal is. For the Windows 7 operating system, you also can check the Access Connections gauge, the Access Connections status icon, or the Access Connections wireless status icon in the Windows notification area. Access Connections gauge: • • Power to the wireless radio is off or no signal. Power to the wireless radio is on. The signal strength of the wireless connection is poor. To improve signal strength, move your computer closer to the wireless access point. Chapter 2. Using your computer 35