Download Smeg WHT714EUK washing machine
Transcript
Problem It does not rinse well. Reason The amount, brand and storage conditions of the detergent used are inappropriate. Detergent is put in the wrong compartment. Laundry became stiff after washing. (**) Pump filter is clogged. Drain hose is folded. Insufficient amount of detergent is used. Detergent is put in the wrong compartment. Detergent might be mixed with the softener. Laundry does not smell like the softener. (**) Detergent is put in the wrong compartment. Detergent might be mixed with the softener. Detergent residue in the detergent Detergent is put in wet drawer. drawer. (**) Detergent has gotten damp. Water pressure is low. The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. There is a problem with the detergent drawer valves. Detergent might be mixed with the softener. Regular drum cleaning is not applied. Too much foam forms in the machine. (**) Improper detergents for the washing machine are being used. Excessive amount of detergent is used. Detergent was stored under improper conditions. Some meshed laundry such as tulle may foam too much because of their texture. Detergent is put in the wrong compartment. Softener is being taken early. Foam is overflowing from the detergent drawer. Washing Machine / User’s Manual Too much detergent is used. Solution Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. Check the filter. Check the drain hose. Using insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Put the detergent in the correct compartment. Do not mix the softener with detergent. Wash and clean the dispenser with hot water. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment. Do not mix the softener with detergent. Wash and clean the dispenser with hot water. Dry the detergent drawer before putting in detergent. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Check the water pressure. Check the holes and clean if they are clogged. Call the Authorized Service Agent. Do not mix the softener with detergent. Wash and clean the dispenser with hot water. Clean the drum regularly. For this, please see 8.2. Use detergents appropriate for the washing machine. Use only sufficient amount of detergent. Store detergent in a closed and dry location. Do not store in excessively hot places. Use smaller amounts of detergent for this type of item. Put the detergent in the correct compartment. There may be problem in the valves or in the detergent dispenser. Call the Authorized Service Agent. Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent. 27 / EN