Download XciteRC Flybar 185M
Transcript
RC functions · Landing RC functions EN Up - down Move the throttle lever forward, the motor revs up and the helicopter rises. Move the throttle lever backwards to sink again. Left - Right Move the direction lever to the left, the helicopter turns to the left. Move it to the right to turn the helicopter to the right. Forward - reverse Move the direction lever towards you, the helicopter will move forward. Move the throttle stick back to reverse. Speed: press the button during the flight and the helicopter becomes faster (beep 2 times). Press again to return to slower speed (beep 1x). Trim Yaw: Watch the helicopter at the start. If the nose turns - just before take-off - to the left or right, this can be corrected with the trim for yaw (see Fig.) If it turns to the left, press the trim lever to the right until the nose stops moving. If it turns to the right, press the trim lever to the left. Landing: • Carefully push the left throttle lever rearward. Try to land „smooth“ without damaging the helicopter. • NOTE: if the flight battery runs empty, the helicopter does not respond accurately to your commands, the flight is unstable. In this case land immediately. • Switch of the helicopter and then the transmitter. 18 XciteRC Flybar 185M Coax
This document in other languages
- français: XciteRC Flybar 185M
- Deutsch: XciteRC Flybar 185M