1
Download Jabra Stone 3
Transcript
jab ra JABRA stone 3 User Manual jabra.com/stone3 Contents 1.welcome........................................... 3 2. headset OVERVIEW.......................... 4 3. how to wear................................... 5 3.1 Change eargels 4. how to charge the battery........ 6 4.1 battery status 5. how to connect............................. 8 5.1 turning on/off the headset 5.2 CONNECT with a bluetooth device (FIRST TIME PAIRING) 5.3 CONNECT with a bluetooth device (SECOND TIME PAIRING OR RE-PAIRING) 5.4 CONNECT with an nfc-enabled DEVICE 6. how to use .................................... 11 6.1 Multiple call handling 6.2 list of VOICE COMMANDS 6.3 list of voice guidance 7.update firmware..........................14 8.SUPPORT...........................................15 8.1faq 8.2How to care for your headset 9.Technical specifications............17 2 1. welcome Thank you for using the Jabra Stone3. We hope you will enjoy it! Jabra STONE3 features NFC technology Volume touch controls Voice controls HD Voice Wireless freedom - Up to 10m/33ft Noise Blackout™ 3.0 3 2. headset OVERVIEW Earhook Answer/End Microphone Battery indicator bra ja Touch volume control panel Bluetooth indicator EargelTM Light indicator NFC zone Extra EargelTM N Battery display FC Charging socket AC charger USB cable NOTE: All accessories are also available on jabra.com. 4 3. how to wear a j ra b Wear the Jabra Stone3 on the right ear and enjoy the comfort. 3.1 Change eargels Choose between four ergo-designed eargels for optimal fit and comfort. a br ja a br ja 5 4. how to charge the battery jabr a jabr a jabra Place the headset in the charger and connect either the AC power or USB cable to charge both the charger and the headset. 6 4.1 battery status Headset battery status talk time 20 min - 2 hours Less than 20 min talk time charger battery status talk time More than 5.5 hours 2.5 -5.5 hours Less than 2.5 hours It takes approx. 3 hours to fully charge the headset and the charger. 7 5. how to connect 5.1 turning on/off the headset ON: Push the headset out of the charger by pressing on the backside. OFF: Insert the headset into the charger. 5.2CONNECT with a bluetooth device (FIRST TIME PAIRING) 1.Take the headset out of the charger. The headset will automatically start up in pairing mode. 2.Follow the voice-guided pairing instructions to pair to your Bluetooth device. 8 5.3CONNECT with a bluetooth device (SECOND TIME PAIRING OR RE-PAIRING) 1.Take the headset out of the charger and turn off the headset. 2.Wear the headset and press and hold (5 secs) the Answer/end button until you hear the pairing instructions. 3.Follow the voice-guided pairing instructions to pair to your Bluetooth device. ja bra 9 5.4CONNECT with an nfc-enabled DEVICE 1.Ensure that NFC is enabled on your mobile device. 2.Take the headset out of the charger and turn off the headset. 3.Wear the headset, and press and hold (5 secs) the Answer/end button until you hear the pairing instructions. 4.Hold the NFC device against the NFC zone of the charger (not the headset). Confirm the connection on your mobile device. N FC NFC zone Note: NFC devices have NFC implemented in different ways. The size and sensitivity of the NFC zone and how to connect the headset may vary between devices. 10 6. how to use Earhook Answer/End Microphone Battery indicator bra ja Touch volume control panel Bluetooth indicator EargelTM Light indicator NFC zone FC Charging socket N Battery display action Answer call Tap or press the Answer/end button End call Tap the Answer/end button Reject call Double-tap the Answer/end button Redial last number Double-tap the Answer/end button when not on a call Adjust speaker volume Slide a finger up/down the Volume panel ra b a j function j ra b a ra b a j 11 The headset can accept and handle multiple calls simultaneously. a j ra b action End current call and answer incoming call Tap the Answer/end button Switch between held call and active call Press and hold (2 secs) the Answer/end button Put current call on hold and answer incoming call Press and hold (2 secs) the Answer/end button Reject incoming call Double-tap the Answer/end button ra b a j function 6.2list of VOICE COMMANDS What you can say what it means Answer Answer incoming call Ignore Reject incoming call 12 6.3list of voice guidance click to listen What you hear Power on Power off Welcome. You are now ready for pairing. Go to the Bluetooth menu on your phone... Pairing failed Connected Disconnected Low battery Call from... Battery level is low Battery level is medium Battery level is high 13 7. update firmware Firmware updates improve performance or add new functionality to Jabra devices. How to update the firmware 1.Download the latest firmware to your PC from the www.jabra.com/stone3 support page. 2.Take the headset out of the charger, and turn off the headset. 3.Connect the charger to your PC using the supplied micro-USB cable. 4.Press and hold (10 secs) the Answer/end button on the headset until the Bluetooth indicator turns yellow, and then release the button. 5.Insert the headset into the charger. 6.Run the firmware updater on your PC, and follow the instructions to update your headset. 14 8. SUPPORT 8.1faq View the comprehensive FAQ on Jabra.com/stone3. Q Why do I hear crackling noises? A Bluetooth is a radio technology that is sensitive to objects between the headset and the connected device. Ensure the headset and the connected device are within range (up to 10 meters or 33 feet). Q What is the range of the headset? A The Jabra Stone3 supports the following maximum ranges: 10m/33ft. Q Why do I not hear anything? A You might need to increase the speaker volume, or ensure that the headset is connected to a device. QI am having Bluetooth connection problems A Check your mobile device’s Bluetooth menu and delete/forget the headset. Re-connect the headset to your Bluetooth device following the Bluetooth connection instructions. 15 8.2How to care for your headset Always store the headset with the power off and safely protected. Avoid storage at extreme temperatures (above 45°C/113°F or below -20°C/-4°F). This can shorten battery life and may affect headset operation. Do not expose the headset to rain or other liquids. 16 9. Technical specifications Jabra stone3 headset specification Weight: 33g (incl charger) Dimensions: H 58 mm x W 50.7 mm x D 24.7mm Microphones: 2 omni-directional microphones Speaker: 10mm dynamic speaker Operating range: 10 m (33 ft) Bluetooth version: 3.0 Paired devices: Up to 8, two connected at the same time (MultiUse™) Supported Bluetooth profiles: A2DP, Hands Free Profile (v1.6), Headset profile (v1.2), PBAP Talk time: Up to 10 hours Standby time: Up to 15 days Operating temperature: -10°C to 60°C (14°F to 140°F) Storage temperature: -20°C to 45°C (-4°F to 113°F) Pairing passkey or PIN: 0000 17 © 2013 GN Netcom A/S (North America: GN Netcom US, Inc.). All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). Rev a Made in China model: bte2 www.jabra.com 18
