Download D-Link DCS-2310L
Transcript
Section 1: Product Overview Removing the Top Panel 2 3 4 Step 1: Place the camera face down on a non-slip flat surface. Step 2: Carefully pry out the two protective rubber screw coverings using a thin flat blade. Step 3: Undo the two screws using a Philips #00 Screwdriver. Step 4: Lift off the protective panel. Note: To ensure that the camera stays weatherproof, users are advised to ensure that all the rubber seals are secured firmly in place. D-Link DCS-2310L User Manual 11