Transcript
BA-EHD2 Install Manual GASKET TO SEAL MOUNT TO WALL SHIELD GASKET - PEEL COVER OFF BACK PLATE WITH TOP AND ARM GASKET ADHESIVE AND ATTACH GASKET BOTTOM CONDUIT FITTINGS y TO ONE SIDE BEFORE ASSEMBLY I 1 MOUNTING ARM BACK BOX (Gif SCREWS SUPPLIED 4 X #8x1.5" SELF DRILLING TYPE MOUNTING SCREWS; SIZE, TYPE AND LENGTH TO BEAR WEIGHT SCREW TORX M5 X 20 -3ea WITH O-RING & POINTED TIP OF CAMERA PLUS WIND AND - 4 SUPPLIED SNOW/ICE LOADING (4) PLACES SCREW.PH MA X14 NOTE: DISCARD BACK BOX SHIPPED WITH CAMERA OT BACK BOX GASKET 0 I 172 | 83.5 NOTE: 4 M4 X 10 BLACK SCREWS ARE ALSO SUPPLIED WITH THE CAMERA, AND MAY BE USED, THOUGH SS SCREWS ARE PREFERRED SCREW, TH M4 X 10 - 4ea 4 - SS SCREWS SUPPLIED 83.5 154 || ТОР СОМЕВ 155.6 252.8 SAFETY SCREW(TORX) M4 X 12 - 4ea NOTE: THESE SCREWS ARE PART OF THE CAMERA.
