Download Gamber-Johnson MAX3 Camera Visor Mount
Transcript
MAX3 Camera Visor Mount MAX3 is a mounting solution that gives you more. MAXimum versatility, flexibility and durability. BENEFITS: • Holds a variety of in-car video cameras and displays • Attaches to the passenger visor on most vehicles • Withstands industry wear and tear • Available in two different configurations • MAX3 Camera Visor Mount Item No. Description Drilling Required Weight Height Width Depth 7160-0312 Camera/Display bracket mounted using the passenger side visor retainer Yes - Attaches to the existing passenger side visor retainer, recommended to use self tapping screws for additional stability 2.8 lbs 2.37” 2.56” 12.48” 7160-0325 Camera bracket mounted using the passenger side visor retainer Yes - Attaches to the existing passenger side visor retainer, recommended to use self tapping screws for additional stability 1.3 lbs 2.37” 2.56” 9.37” With an all metal construction, all axes movement and ability to hold a wide range of devices, MAX3 is more versatile, more durable and more flexible. • Will support cameras and or displays up to three pounds • Passed shock and vibration testing to MIL STD 810 G • Display extension allows for use of passenger side visor (if extension is not used the visor will remain in the stowed position) • Display hole pattern supports VESA and AMPS mounting Shown: 7160-0312 • All axes range of motion in X axis (left/right), Y axis (front/back) and Z axis (up/down) allows you to position the camera and display at any angle • Encapsulated ball design offers theft deterrence Shown: 7160-0325 mymax3.com Every gadget needs me. MOBILE ALL AXIS 3001 Borham Ave Stevens Point, WI 54481 Phone: 877-412-6583 Fax: 715-344-8845 This document, including images, may not be reproduced partly or fully without the expressed written consent of Gamber-Johnson’s Marketing Department. © Copyright 2011 Gamber-Johnson, LLC