Transcript
PIWIPDK1 iPod/iPhone In-Wall Mounted Audio/Video Docking Center w/Wireless Remote http://www.pyleaudio.com Installation Guide. For the easiest possible installation, please read and follow these tips. 1. You’ll need two sets of wires for a full audio/video installation. Use Cat5 (Ethernet) cable for the audio and power. For video, choose composite, or s-video, which will provide a higher quality image. Run these two wires together between the dock and output box for your convenience. 2. For best results, do not use the Ethernet (RJ-45) jack on the output box. You should not crimp RJ-45 connectors onto the Cat5 cable. Instead, separate the wires by color and use a Cat5 punch down tool to individually connect each wire to the white connector. The order, from bottom to top, is as follows: brown-stripe, brown, green-stripe, green, orange-stripe, orange, blue-stripe, blue.
