Transcript
Model: ACC322 Installation and Assembly - Safety Belt Accessory IMPORTANT! Read entire instruction sheet before you start installation and assembly. Before you start make sure all parts shown below are included with your product. Parts List Description A safety belt Qty. 1 Part # 1PM-99TD01P (fast pack 083-8012) A Note: Some parts may appear slightly different than illustrated. 1 Wrap safety belt (A) around component and mount as shown in figure 1.1. Position belt close to the back of the component being secured (in line with the back feet) as shown in figure 1.2. Insert loose end of safety belt into the buckle end as shown in figure 1.3. Pull to tighten securely. GENERIC COMPONENT GENERIC COMPONENT fig 1.2 fig 1.1 A MOUNT (SOLD SEPARATELY) MODEL PS200 SHOWN A A fig 1.3 1 of 1 Visit the Peerless Web Site at www.peerlessmounts.com ISSUED: 06-19-07 SHEET #: 120-9036 -2 2-27-08 For customer care call 1-800-729-0307 or 708-865-8870. © 2007, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.
