Download Toshiba 22AV703

AV0*
LV0*
ANALOGUE
Series
English
Contents
Safety Precautions.....................4
Watching TV Programmes................... 16
Air Circulation....................................... 4
Changing the Position.......................... 17
Heat Damage....................................... 4
Power Supply....................................... 4
Displaying the On-screen
Information........................................... 17
Do......................................................... 4
General Controls........................18
Do not................................................... 4
Selecting Channels.............................. 18
Installation and important
information..................................5
The Time Display – analogue only....... 18
Where to install.................................... 5
Subtitles............................................... 18
EXCLUSION CLAUSE......................... 5
Using the Quick Access (Except PC)... 18
The Remote Control...................6
Using the Quick Access (PC Only)....... 18
Stereo and Bilingual Transmissions..... 18
Sound Controls...........................19
Inserting batteries and.......................... 6
effective range of the remote................ 6
Volume controls and mute sound......... 19
Connecting External
Equipment...................................7
Dual...................................................... 19
Bass, Treble and Balance.................... 19
Stable Sound®...................................... 19
Connecting an HDMI or DVI
device to the HDMI input............9
Surround.............................................. 19
Bass Boost........................................... 19
To connect an HDMI device................. 9
Widescreen viewing...................20
To connect a DVI device...................... 9
Acceptable Video signals through HDMI
terminals............................................... 10
Available Picture Size and
Position Control.................................... 21
Acceptable PC signals through
HDMI-1/D-SUB terminals..................... 10
Picture Controls..........................22
Connecting a Computer.............11
Picture Mode (Except PC).................... 22
Picture Position.................................... 22
To connect a PC to the
RGB/PC terminal.................................. 11
Picture Preferences.............................. 22
To connect a PC to the
HDMI terminal...................................... 11
3D Colour Management....................... 22
Reset.................................................... 22
Base Colour Adjustment....................... 23
Using the Controls.....................12
Colour Temperature.............................. 23
Switching On........................................ 13
Active Backlight Control....................... 23
Using the Remote Control.................... 13
Black/White Level................................. 23
Using the Controls................................ 13
Digital Noise Reduction........................ 24
Startup Application....................14
MPEG NR – Noise Reduction.............. 24
Quick Setup.......................................... 14
Cinema Mode....................................... 24
Auto Tuning.......................................... 14
Reset Picture Settings.......................... 24
Manual Tuning...................................... 15
Auto Format (Widescreen)................... 24
HDMI 1 Audio....................................... 30
Blue Screen.......................................... 24
Frequently Asked Questions.....31
Side Panel............................................ 24
Specifications and
Accessories................................33
Picture still............................................ 24
Enjoying Photo through
USB Port......................................25
Photo Viewer specifications................. 25
Opening Photo Viewer......................... 25
Viewing Photo Files.............................. 25
Enjoying Music through
USB Port......................................26
Music Player specifications.................. 26
Opening Music Player.......................... 26
Playing Music Files.............................. 26
Media USB Port................................... 26
Other features.............................27
Panel Lock........................................... 27
Sleep Timer.......................................... 27
On Timer............................................... 27
On Timer Position................................. 27
Text Services and
Text Information..........................28
Selecting modes................................... 28
Navigating Pages using Auto............... 28
Navigating Pages using LIST............... 28
Control Buttons.................................... 28
PC Settings.................................29
Horizontal and Vertical Position........... 29
Sampling Clock.................................... 29
Clock Phase......................................... 29
Reset.................................................... 29
Input Selection and
AV Connections..........................30
Input Selection..................................... 30
Input Signal Selection.......................... 30
English
4:3 Stretch............................................ 24
English
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like
any electrical equipment, care must be taken to obtain the best results and for safety to be assured.
Please read the points below for your own safety. They are of a general nature, intended to help with all
electronic consumer products and some points may not apply to the goods you have just purchased.
The Class I apparatus shall be connected to a mains socket outlet with a protective earthing
connection.
Air Circulation
DO NOT REMOVE ANY FIXED COVERS
AS THIS WILL EXPOSE DANGEROUS AND
‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE
SHOULD BE READILY OPERABLE.
Leave more than 10cm clearance around the
television to allow adequate ventilation. This
will prevent overheating and possible damage
to the television. Dusty places should also be
avoided.
Heat Damage
Do not
Damage may occur if the television is left in
direct sunlight or near a heater. Avoid places
subject to extremely high temperatures or
humidity. Place in a location where the temperature remains between 5°C (41°F) min. and
35°C (94°F) max.
DO NOT obstruct the ventilation openings of
the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause
damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be
exposed to dripping or splashing or objects filled
with liquids, such as vases, to be placed on the
equipment.
DO NOT place hot objects or naked flame
sources, such as lighted candles or nightlights
on, or close to equipment. High temperatures
can melt plastic and lead to fires.
DO NOT use makeshift stands and NEVER
fix legs with wood screws. To ensure complete
safety, always fit the manufacturers’ approved
stand, bracket or legs with the fixings provided
according to the instructions.
DO NOT leave equipment switched on when
it is unattended, unless it is specifically stated
that it is designed for unattended operation or
has a standby mode. Switch off by withdrawing
the plug, make sure your family know how to
do this. Special arrangements may need to be
made for people with disabilities.
DO NOT continue to operate the equipment if
you are in any doubt about it working normally,
or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
Power Supply
The mains supply required for this equipment
is 220-240v AC 50/60Hz. Never connect to a
DC supply or any other power source. DO ensure that the television is not standing on the
mains lead. Use only the supplied lead.
DO NOT cut off the mains plug from this
equipment, this incorporates a special Radio
Interference Filter, the removal of which will
impair its performance. In the UK, the fuse
fitted in this plug is approved by ASTA or BSI
to BS1362.
It should only be replaced by a correctly rated
and approved type and the fuse cover must be
refitted.
IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.
Do
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections
(including the mains plug, extension leads and
inter-connections between pieces of equipment) are properly made and in accordance
with the manufacturers’ instructions. Switch off
and withdraw the mains plug before making or
changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of
your equipment.
DO be careful with glass panels on equipment.
WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into
holes, slots or any other openings in the case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
Where to install
Locate the television away from direct sunlight or other strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV set on a stable, level surface that can support the weight of the TV. In order to maintain stability and prevent it from falling over, secure the TV to the level surface using the strap located under the table
top stand, or to a wall using a sturdy tie to the clip on the back of the table top stand.
The LCD display panels are manufactured using
an extremely high level of precision technology,
however sometimes some parts of the screen
may be missing picture elements or have luminous spots. This is not a sign of a malfunction.
Make sure the television is located in a position
where it cannot be pushed or hit by objects, as
pressure will break or damage the screen, and
that small items cannot be inserted into slots or
openings in the case.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)
ii)
iii)
iv)
v)
vi)
fire;
earthquake;
accidental damage;
intentional misuse of the product;
use of the product in improper conditions;
loss and/or damage caused to the product while in the possession of a third party;
any damage or loss caused as a result of the owner’s failure and/or neglect to follow the invii)
structions set out in the owner’s manual;
any loss or damage caused directly as a result of misuse or malfunction of the product when
viii)
used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or
damage including but not limited to the following, loss of profit, interruption of business, the loss of
recorded data whether caused during normal operation or misuse of the product.
• If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer
displays, video games, on-screen menus, etc. are left on the television-screen for any length of time they
could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.
• Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the
image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of other size modes (e.g.: Superlive) and varying the “side panel”
brightness (if available on the model) will prevent permanent retention.
SYMBOL
SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightening flash with arrowhead symbol within an
equilateral t riangle is intended to alert the user to the presence of un-insulated
“DANGEROUS VOLTAGE” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the
user to the presence of important operating and maintenance (servicing) instruction
in the literature accompanying the appliance.
WARNING: To prevent the spread of fire, keep candles or other open flames away
from this product at all times.
English
Installation and important information
English
The Remote Control
Simple at-a-glance reference of your remote
control.
12 In TV mode: Display on-screen information
In Text mode: Access the index page
13 Mute the sound
14 Display the quick access menu
15 Exit the menu system
16 No Function
17 Go to the previous level of the menu
18 Display the on-screen menu
19 Menu navigation: ▲, ▼, ◄, ►:
In Text mode: Change the page
OK: Confirm the selection
20 Colour button: Text control buttons
Reveal concealed text
Hold a wanted page
Enlarge text display size
Select a page while viewing a
normal picture
Inserting batteries and
effective range of the remote
Remove the back
cover to reveal the
battery compartment
and make sure the
batteries are inserted
the right way round.
Suitable battery
types for this remote
are AAA, 1.5V.
Do not combine a used, old battery with a new
one or mix battery types. Remove dead batteries
immediately to prevent acid from leaking into
the battery compartment. Dispose of them in
accordance with instructions on page 34 of this
manual. Warning: batteries must not be exposed
to excessive heat such as sunlight or fire.
1
2
3
4
5
6
7
8
9
10
11
The performance of the remote control will
deteriorate beyond a distance of five metres or
outside an angle of 30 degrees from the centre
of the television. If the operating range becomes
reduced the batteries may need replacing.
Toggle between TV ON or Standby
Toggle between external input sources
Still Picture
To display the teletext screen
TEXT subtitle pages if available
Stereo/Bilingual transmissions
Number buttons
No Function
No Function
Change the volume
Change the channel
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Connect the power cord into the AC IN socket found at the back of the TV.
For 19/22AV70**
HDMI 1 INPUT
SOCKET
HDMI 2
INPUT
SOCKET
Note: SCART can support Canal+ decoder.
For 26/32AV70**
HDMI 1 INPUT
SOCKET
HDMI 2 INPUT
SOCKET
Note: SCART1 and SCART 2 can support Canal+ decoder.
English
Connecting External Equipment
English
For 32/40LV70**
HDMI 1 INPUT
SOCKET
HDMI 2 INPUT
SOCKET
HDMI® (High-Definition Multimedia Interface)
is for use with a DVD, decoder or electrical
equipment with digital audio and video output. It
is designed for best performance with 1080i highdefinition video signals but will also accept and
display 480i, 480p, 576i, 576p, 720p and 1080p.
HDMI1 also support VGA, SVGA, XGA, WXGA
and SXGA.
Aerial cables: - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear
of the television.
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder
to the television.
SCART cables: - - - -- - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder
TV socket to the television. Connect the media
player SAT socket to the decoder MEDIA REC.
socket.
NOTE: Although this television is able to connect to HDMI equipment it is possible that some
equipment may not operate correctly.
A wide variety of external equipment can
be connected to the back of the television,
therefore the relevant owners manuals for all
additional equipment must be referred to.
Before running Auto Tuning put your decoder
and media recorder to Standby.
If the television automatically switches over to
monitor external equipment, return to normal
television by pressing the desired programme
position button. To recall external equipment,
press to select.
The phono sockets alongside the COMPONENT
VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT
socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See
the next page.)
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
The HDMI input on your television receives digital audio and uncompressed digital video from an
HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top
box or DVD player with HDMI or DVI output). For acceptable video signal formats.
Note:
• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of
a new standard.
Please unplug your HDMI cable first and then try setting the following options (Lip Sync) to “Off”.
Your early HDMI source should operate properly with your television.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
To connect an HDMI device
To connect a DVI device
Connect an HDMI cable (type A connector) to
the HDMI terminal.
For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo
(
).
• If your HDMI connection is capable of 1080p
and/or your television is capable of refresh
rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio.
Separate analogue audio cables are not
required (see illustration).
The HDMI 3 terminal is located on the side of
the television.
Connect an HDMI-to-DVI adapter cable (HDMI
type A connector) to the HDMI 1 terminal and
audio cables to the PC/HDMI1 (AUDIO) socket
(see illustration).
• The recommended HDMI-to-DVI adapter
cable length is 6.6ft (2m).
• An HDMI-to-DVI adapter cable transfers
video only. Separate analogue audio cables
are required.
the back of your television
Computer
For instruction
purposes only
HDMI-to-DVI
adapter cable
Audio cable for PC to
television connection
(not supplied)
For instruction
purposes only
HDMI device
VIDEO
L
AUDIO
R
HDMI OUT
IN
Note:
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic components,
turn on the television first, and then the HDMI
or DVI device.
• When turning off your electronic components,
turn off the HDMI or DVI device first, and then
the television.
OUT
L
R
HDMI cable
To view the HDMI device video, press the
button to select HDMI 1, HDMI 2 or HDMI 3
mode.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,
which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that
some devices may not operate properly with the television.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
English
Connecting an HDMI or DVI device to the HDMI input
English
Acceptable Video signals through HDMI terminals
Format
Resolution
V. Frequency
H. Frequency
Pixel Clock Frequency
480i
720 x 480i
60Hz
15.734KHz
27MHz
480p
720 x 480p
60Hz
31.5KHz
27MHz / 27.027MHz
576i
720 x 576i
50Hz
15.625KHz
27MHz
576p
720 x 576p
50Hz
31.25KHz
54MHz
720p
1280 x 720p
50Hz
37.5KHz
74.25MHz
720p
1280 x 720p
59.94Hz / 60Hz
44.9KHz / 45KHz
74.17MHz / 74.25MHz
1080i
1920 x 1080i
50Hz
28.125KHz
74.25MHz
1080i
1920 x 1080i
59.94Hz / 60Hz
33.72KHz / 33.75KHz
74.17MHz / 74.25MHz
1080p
1920 x 1080p
50Hz
56.25KHz
148.5MHz
1080p
1920 x 1080p
59.94Hz / 60Hz
67.432KHz / 67.5KHz
148.35MHz / 148.5MHz
1080p
1920 x 1080p
24Hz / 25Hz
27KHz / 28.125KHz
74.25MHz / 74.25MHz
1080p
1920 x 1080p
30Hz
33.75KHz
74.25MHz
Acceptable PC signals through HDMI-1/D-SUB terminals
Format
Resolution
V. Frequency
H. Frequency
Pixel Clock Frequency
VGA
640 x 480
59.9Hz
31.469KHz
25.175MHz
VGA
640 x 480
72.8Hz
37.861KHz
31.5MHz
VGA
640 x 480
75Hz
37.5KHz
31.5MHz
VGA
720 x 400
70Hz
31.469KHz
28.322MHz
SVGA
800 x 600
56.2Hz
35.156KHz
36MHz
SVGA
800 x 600
60.3Hz
37.879KHz
40MHz
SVGA
800 x 600
72.1Hz
48.077KHz
50MHz
SVGA
800 x 600
75Hz
46.875KHz
49.5MHz
XGA
1024 x 768
60Hz
48.363KHz
65MHz
XGA
1024 x 768
70Hz
56.476KHz
75MHz
XGA
1024 x 768
75Hz
60.023KHz
78.75MHz
WXGA
1280 x 720
59.8Hz
44.772KHz
74.25MHz
WXGA
1280 x 768
59.8Hz
44.776KHz
79.5MHz
WXGA
1360 x 768
60Hz
47.712KHz
85.5MHz
SXGA
1280x1024
60Hz
63.981KHz
108MHz
SXGA
1280x1024
75Hz
79.976KHz
135MHz
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Note 1 : HDMI 1 terminal supports PC signal input; HDMI 2 and 3 do not support PC signal.
Note 2 : For PC input, for only supported PC signal can show the correct resolution on TV display.
10
English
Connecting a Computer
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers.
To connect a PC to
the RGB/PC terminal
• When PC input mode is selected, some of
the television’s features will be unavailable
e.g. Manual Settings in the SETUP menu,
Colour, Tint, Sharpness and Black/White
Level in the PICTURE menu.
• If connecting a certain PC model with a
unique PC signal, the PC signal may not be
detected correctly.
When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB
(15-pin) computer cable and
a PC audio cable for the PC/HDMI1 (AUDIO)
socket. Select PC from the PC/HDMI 1 Audio
options in the AV Connection menu located in
the SETUP menu.
Computer
To connect a PC to the
HDMI terminal
the back of your television
When connecting a PC to the HDMI terminal
on the television, use an HDMI-to-DVI adapter
cable and an analogue audio cable.
If connecting a PC with an HDMI terminal, use
an HDMI cable (type A connector). A separate
analogue cable is not necessary (see page 9).
For instruction
purposes only
Audio cable for PC to
television connection
(not supplied)
Conversion
adaptor if required
(not supplied)
Computer
RGB PC cable
(not supplied)
the back of your television
For instruction
purposes only
Mini D-sub
15 pin connector
Audio cable for PC to
television connection
(not supplied)
To use a PC, set the monitor output resolution
on the PC before connecting it to the television. For acceptable PC signal formats, see
page 10.
To display the optimum picture, use the PC
setting feature (see page 29).
Note:
• The PC audio input terminal on the television
is shared with the HDMI 1 analogue audio
input terminal.
• Some PC models cannot be connected to
this television.
• An adapter is not needed for computers with
a compatible mini D-sub 15-pin terminal.
• Depending on the DVD’s title and the
specifications of the PC on which you are
playing the DVD-Video, some scenes may
be skipped or you may not be able to pause
during multiangle scenes.
• A band may appear at the edges of the
screen or parts of the picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
Conversion
adaptor if required
(not supplied)
RGB PC cable
(not supplied)
Mini D-sub
15 pin connector
For acceptable PC and video signal formats,
see page 10.
Note:
• The edges of the images may be hidden.
• If connecting a certain PC model with a
unique PC signal, the PC signal may not be
detected correctly.
11
English
Using the Controls
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
For 19/22AV70**
For 26/32AV70**
Note: 19/22/26/32AV70** series does not have HDMI 3 Input.
12
English
For 32/40LV70**
Switching On
Using the Controls
If the RED LED is unlit check that the plug is
connected to the power supply. If the picture
does not appear press on the remote control, it may take a few moments.
To put the television into Standby press on
the remote control. To view the television press
again. The picture may take a few seconds
to appear.
To change the volume press .
To change the channel press
P .
Press MENU and ▲ or ▼, ◄ or ► to control
the sound and picture options.
Press EXIT to finish.
To select an external input, press
and then
use
▲ or ▼ to move through the list until
the appropriate input source is selected.
Using the Remote Control
Please always refer to the owner’s manual of
the equipment to be connected for full details.
Please note: Inserting the headphone plug will
mute the sound from all speakers.
To set up the television you will now need to
use the on screen menus. Press MENU on the
remote control to see the menus.
The on-screen menu appears as a list of five
topics. As each symbol is selected by pressing
◄ or ► on the navigation ring on the remote
control, its respective options will appear
below.
To use the options, press ▲ or ▼ on the navigation ring to move up and down through them
and use OK, ◄ or ► to select the required
choice. Follow the on-screen instructions. The
functions of each menu are described in detail
throughout the manual.
13
English
Startup Application
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 6.
Quick Setup
Auto Tuning
For 1st use, plug in the television and
press the button. The Quick Setup
screen will appear.
Note:
As new services are broadcast, it will be
necessary to re-tune the television in order to
view them.
Press ◄ or ► select your language, and
then press OK, the Location screen will
appear.
Auto Tuning will completely re-tune the television and can be used to up date the channel
list. It is recommended that Auto Tuning
is run periodically to ensure that all new
services are added. All current channels and
settings, e.g. locked channels, will be lost.
From the SET UP menu, press p or q to
select Auto tuning.
Press ◄ or ► select Home or Store.
For normal home use, select Home.
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Quick Setup
Picture position
Automatic Power Down
Location
Reset TV
OK Enter
4
Press ◄ or ► to select your country and
press OK.
Press
English
UK
OK
OK
OK
OK
On
Home
OK
EXIT
Watch TV
to display the Auto tuning menu.
Auto tuning
!
Previoous settings will be lost!
Press EXIT for no change.
Press OK key to start Auto tune.
Press
to start the automatic search.
The search will begin for all available
stations.
To start Auto tuning press OK.
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed using Manual tuning in SET UP menu. See page
4
When the automatic search is completed,
the TV will automatically appear the SET
UP menu.
Closing the Auto tuning menu, press EXIT.
Note:
When you preset the channel which sound
of broadcast transmission system adopts “M”
system, the sound system may not be tuned
correctly if the radio waves transmit badly. At
that time, preset the channel by Manual tuning.
14
From the SET UP menu, press p or q to
select Manual tuning.
Press
to display the Manual tuning
menu. Press u than press p or q to
select the programme position you want to
arrange and press ◄ again.
Station:
Station identification. Use the p or q
and ◄ or ► buttons to enter up to seven
characters.
Use p or q to highlight the desired position.
We suggest Pos. 0 for a media recorder.
Manual tunning
Programme
1
B/G
A
C69
0
Note:
Different Channel numbers may be
displayed.
Press
to select. If the channel chosen
for the media recorder is set to skip, Skip
should be removed before storing.
Press p or q to move through the list to
your preferred position. As you do so the
other stations will move to make room.
Press t to store programme position.
4
Press ► to select System and use p or q to
change if required.
Manual tunning
System
Press
to display the breakdown menu.
Press t or u to select an item, then press
p or q to select the item as shown below.
1
Manual tunning
B/G
A
C69
0
A B C DE F G
C69
0
Press p or q to begin the search. The search
symbol will flash.
Manual tunning
H
A
Programme:
The number to be pressed on the remote
control.
B
System:
Specific to certain areas.
C
Colour system:
Factory set to Auto, should only be
changed if problems are experienced, i.e.
NTSC input from external source.
D
Programme skip:
Means nothing has been stored or the
facility to skip the channel is ON.
E
A
Then press ► to select Search.
Programme
1
B/G
Search
1
Search:
Search up and down for a signal.
G
Manual fine tuning:
Turn on to execute fine tune function. Turn
off to execute manual fine tune funftion.
A
C69
0
Each signal will be shown on the television, if
it is not your media recorder, press p or q
again to restart the search.
When your media recorder signal is found,
press ► to move along to Station. With p,
q, ◄ and ► put in the required characters,
e.g. VCR.
Manual tunning
Station
1
Channel:
The channel number on which a station is
being broadcast.
F
B/G
Press
B/G
A
C69
0 V C R
to save.
Repeat for each position you want to tune or,
press MENU to return to the list of channels
and select the next number to tune.
Press EXIT when you have finished.
15
English
H
Manual Tuning
English
Skip
From the SET UP menu, press p or q
to select Manual tuning menu, and then
press .
To prevent certain channels from being viewed,
positions can be skipped.
From the SET UP menu, press p or q to
select Manual tuning.
Press
to display the Manual tuning
menu. Press u than press p or q to
select the programme position you want to
arrange.
Use p or q to highlight the position to be
skipped and press
to select.
Press q to select the new position “2”,
then press t.
Press ► to select Programme skip and use
p or q to turn Skip on, and then press .
4
Manual tunning
Programme skip
1
4
B/G
A
C69
Press p to select the channel MNOP, then
press u.
Press p to select the new position “1”
then press t.
0
Press RETURN and repeat from Step 2 or
press EXIT.
Each position has to be individually selected.
To turn Skip off, repeat the procedure for each
position.
Skipped positions cannot be selected by P
and P . or by the controls on the television, but can still be accessed by the number
buttons on the remote control.
Confirm new Manual tuning menu.
Watching TV Programmes
Selecting the menu language
Choose from 22 different languages (English,
French, German, Spanish, Italian, Dutch,
Portuguese, Swedish, Danish, Norwegian,
Finnish, Polish, Turkish, Hungarian, Slovak,
Czech, Russian, Romanian, Bulgarian, Serbian,
Greek, Croatian) for the On-Screen Display.
Sorting positions
• The TV is capable of receiving a number of different channels depending upon where you live.
• Sorting programme position is an easy way of
storing each channel on the programme position of your choice.
Ex.: To swap channel ABCD (Prog. 1) for channel MNOP (Prog. 2).
Press MENU, then press t or u to display
the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
From the SET UP menu, press p or q
to select Manual tuning menu, and then
press .
Edit
English
UK
OK
OK
On
Home
RETURN
Back
Press p or q to select Language.
Press t or u to select the desired language.
16
English
Changing the Position
Enter the desired position number using
the Number buttons on the remote control.
For positions below 10, use 0 and the
requires number e.g., for position 1.
3
You can also change the position by using
P
or P .
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between different format
channels will takes several seconds.
Displaying the On-screen
Information
Press
to display the following onscreen information.
3
The information will disappear in about 5
seconds.
• Position or external input mode
selected
• Position skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
To erase the display instantly, press EXIT.
17
English
General Controls
The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment.
Selecting Channels
Using the Quick Access
(Except PC)
To select a channel use the numbered buttons
on the remote control.
Channels can also be selected using P
and
P .
The quick access menu helps you access some
options quickly such as Picture Mode, Picture
Size, and Sleep Timer. Press the QUICK button
to display the Quick access menu and use
▲ or ▼ to select the option you would like to
change.
To display on-screen information such as position, input mode or stereo/mono signal, press
. Press again to cancel.
The Time Display – analogue only
The time display facility allows the current
(text service) time to be seen on the television
screen.
Source
Quick access item Description
Picture Mode
Press
whilst watching a normal television broadcast to see the time display from the
broadcaster. It will remain on screen for about
15 seconds.
Note:
See age 22
Except PC Picture Size
See age 20
Sleep Timer
See age 27
Using the Quick Access (PC Only)
This display may not be available in some
cases.
Quick access helps you access some options
quickly, such as Picture Size and Sleep Timer.
Press QUICK to display the Quick access and
use ▲ or ▼ to select the option.
Stereo and Bilingual
Transmissions
Quick access
If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on
the screen each time channels are changed, disappearing after a few seconds. If the broadcast
is not in stereo the word Mono will appear.
Stereo: Press
to select Stereo or Mono.
Bilingual: If a bilingual programme is offered,
the word Dual will display on screen. To change
between languages, press
to switch between Dual 1, Dual 2 or Mono.
Source
Except PC
Subtitles
If Subtitles are available for your current programme, pressing the SUBTITLE button will
toggle Subtitles on or off.
18
Quick access item Description
Picture Size
See age 20
Sleep Timer
See age 27
Volume controls and mute sound
Volume
Press
or
Stable Sound®
The Stable Sound feature limits high volume
levels in order to prevent the extreme changes
in volume that can occur when channels are
changed or a programme switches to a
commercial.
to adjust the volume.
Sound Mute
Press
once to turn the sound off and again
to cancel.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Stable Sound and ◄
or ► to select On or Off.
Dual
If a programme or film is being broadcast with
a soundtrack in more than one language, the
DUAL feature allows selection between them.
Surround
Bass boost enhances depth of the sound.
Press MENU and ◄ or ► to select SOUND.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Bass boost and ◄ or
► to select On or Off.
SOUND
Dual 1
0
0
0
Off
Off
Off
Dual
Bass
Treble
Balance
Stable sound
Surround
Bass boost
OK
Enter
RETURN
Bass Boost
Surround enhances depth of the sound.
Back
Use q to highlight Dual, and then press ◄
or ► to choose between Dual 1 or Dual 2.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Surround and ◄ or
► to select On or Off.
SOUND
Dual 1
0
0
0
Off
Off
Off
Dual
Bass
Treble
Balance
Stable sound
Surround
Bass boost
OK
Enter
RETURN
English
Sound Controls
Back
Bass, Treble and Balance
The sound controls are accessible in digital
and analogue modes.
Press MENU and ◄ or ► to select SOUND.
Press q to highlight Bass, Treble or
Balance and ◄ or ► to change the setting.
19
English
Widescreen viewing
Depending on the type of broadcast being transmitted, programmes can be viewed in a
number of formats.
Native
When using a PC connected via HDMI this
setting will show the picture without over
scan, i.e. WYSIWYG.
This option is only available when
watching video signal source via HDMI.
Wide
Use this setting when watching a
widescreen DVD, widescreen video tape
or a 16:9 broadcast (when available). Due
to the range of widescreen formats (16:9,
14:9, 20:9 etc.) black bars may be visible
on the top and bottom of the screen.
4:3
Super Live
Use this setting to view a true 4:3
broadcast.
This setting will enlarge a 4:3 image to
fit the screen by stretching the image
horizontally and vertically, holding better
proportions at the centre of the image.
Some distortion may occur.
Cinema
When watching letterbox format films/
video tapes, this setting will eliminate or
reduce the black bars at the top and bottom
of the screen by zooming in and selecting
the image without distortion.
Subtitle
When subtitles are included on a letterbox
format broadcast, this setting will raise
the picture to ensure that all the text is
displayed.
14:9
Subtitle
Use this setting when watching a 14:9
broadcast.
Press QUICK to display the QUICK access
menu. Use ▲ or ▼ to highlight the Picture Size,
and press ◄ or ► to select the option.
Picture Mode
Picture Size
Sleep Timer
Quick access
Standard
Wide
Off
You can choose the picture size from Native, Wide, 4:3, Super Live, Cinema, Subtitle or 14:9.
Using the special functions to change the size of the displayed image (i.e. changing the
height/width ratio) for the purposes of public display or commercial gain may infringe on
copyright laws.
20
English
Available Picture Size and Position Control
Screen Mode Size RF ATV/ Video RF ATV/ Video
HDMI/
HDMI/ Component/ Component/
/S-video /
/S-video /
1440x576p 1440x480p
HDMI/
HDMI/
Compornent / Compornent/
720p
1080i
HDMI/
HDMI)/
PAL/
NTSC3.58/
SECAM/
NTSC4.43/
576i/
PAL60/
576P
480i/
480P
Native
(*only available
for HDMI input)
Wide
4:3
Super Live
(Panoramic
scaled.)
Cinema
Subtitle
14:9
H
—
—
—
—
—
—
V
—
—
—
—
—
—
H
Yes
Yes
Yes
Yes
Yes
Yes
V
—
—
—
—
—
—
H
Yes
Yes
Yes
Yes
Yes
Yes
V
—
—
—
—
—
—
H
Yes
Yes
Yes
Yes
Yes
Yes
V
Yes
Yes
Yes
Yes
Yes
Yes
H
Yes
Yes
Yes
Yes
Yes
Yes
V
Yes
Yes
Yes
Yes
Yes
Yes
H
Yes
Yes
Yes
Yes
V
Yes
Yes
Yes
Yes
H
Yes
Yes
Yes
Yes
V
Yes
Yes
Yes
Yes
Pic size
Wide
(*Not available when receive
WXGA:1360x768@60Hz source. )
Normal
PC/HDMI PC format
H
—
V
—
H
—
V
—
Note:
Above “— mark” means No function.
21
English
Picture Controls
Most of the picture controls and functions are available in both digital and analogue modes.
Note: features not available will be greyed out.
Picture Position
Picture Preferences
Press MENU and ◄ or ► to display the
SET UP menu.
You can customise current picture mode settings
while selecting User.
Press ▲ or ▼ to select Picture position.
From the PICTURE menu select Picture
settings and press .
Press ▲ or ▼ to select either Backlight,
Contrast, Brightness, Colour, Tint,
Sharpness, Black/White Level, Cinema
mode, or Colour Temperature.
SET UP
Language
Country
Auto tuning
Manual tuning
AV connection
Quick Setup
Picture position
Automatic Power Down
Location
Reset TV
OK Enter
English
UK
OK
OK
OK
OK
OK
On
Home
OK
EXIT
Press ◄ or ► to adjust the settings.
Watch TV
Reset
Press
to view the options available for
the picture format that has been selected.
This feature resets all picture settings to the
factory settings.
Note: If any picture settings have not been
changed, Reset is not available.
Press ▲ or ▼ to select an option, then ◄
or ► to adjust the settings.
The options differ depending on the currently selected widescreen format and the
input signal.
In the PICTURE menu press b to select
Reset and press .
Picture Position
Horizontal position
Vertical position
Reset
0
0
OK
3D Colour Management
When 3D Colour management is set to On it
allows the ”Base colour adjustment” feature to
become available.
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Red, Green, Blue, Yellow, Magenta or Cyan.
To return to the original factory settings
select Reset in the Picture Position
menu and press .
Picture Mode (Except PC)
From the PICTURE menu select Picture
settings and press .
This TV offers the choice of personalising the
picture style.
From the Picture Settings menu, press
▲ or ▼ to select Cinema mode.
User, Dynamic, Standard, Mild, Movie,
and Game are preset options and affect may
features/settings within the TV.
Press ◄ or ► to select On or Off.
Press QUICK on the remote and ▲ or ▼ to
select Picture Mode.
Note:
When a DVD movie with subtitle is playing back,
this mode may not work correctly.
Press ◄ or ► to select the picture mode
you prefer and press EXIT.
Note: The picture mode you select affects the
current input.
22
Press ▲ or ▼ to select
Color Temperature and then press ◄
or ►.
The Base Colour adjustment feature allows
the adjustment of individual colours to suit personal preference. This can be useful when using
an external source. It only can be adjusted when
3D Colour Management is set to On.
The Color Temperature menu displays.
Picture settings
From the PICTURE menu select Base
Colour adjustment and press .
Press , then press ▲ or ▼ to select an
item you want to adjust.
Base colour adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
OK
Enter
Edit
Hue
Saturation
Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
RETURN
RETURN
Back
Press ◄ or ► to select the
Color Temperature setting (Medium,
Warm, Cool).
OK
Colour Temerature
Colour Temperature
Red Level
Green Level
Blue Level
Back
Press ►, and then press ◄ or ► to select
Hue, Saturation or Brightness.
4
4
User
100
100
50
50
0
50
High
On
Cool
OK
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Black/White Level
Cinema mode
Colour Temperature
Reset
Press ▲ or ▼ to adjust the settings as
required.
Cool
0
0
0
Press ▲ or ▼ to select the option you want
to adjust, and then press ◄ or ► to adjust
the settings.
Press RETUREN to return to the previous
menu.
Note:
In the PC Input mode, this function is not
available.
To return the Colour Temperature settings to the factory defaults, select Reset
and press .
Colour Temperature
Active Backlight Control
Colour Temperature increases the ‘warmth’ or
“coolness” of a picture by increasing the red or
blue tint.
When Active backlight control is activated it will
automatically optimise the backlighting levels
for dark scenes.
In the PICTURE menu press ► to select
Picture Settings and press .
In the PICTURE menu press ► to select
Active Backlight Control.
The Picture Settings menu displays.
Press ◄ or ► to select On or Off.
PICTURE
Picture Settings
Active Backlight Control
3D Colour management
Base colour adjust
DNR
MPEG NR
OK
Enter
OK
Black/White Level
On
On
OK
This function increases the strength of dark
areas of the picture, which improves picture
definition.
Low
Low
EXIT
Watch TV
In the PICTURE menu press ► to select
Picture Settings and press .
The Picture Settings menu displays.
Press ▲ or ▼ to select Black/White
Level and then press ◄ or ►.
23
Press ◄ or ► to adjust the level. The effect
depends on the broadcast and is most
noticeable on dark colours.
English
Base Colour Adjustment
English
Digital Noise Reduction
Press MENU, and then press ◄ or ► to
display the FUNCTION menu.
DNR (Digital Noise Reduction) enables you
to “soften” the screen representation of a weak
signal to reduce the noise effect.
Press ▲ or ▼ to select Auto format and ◄
or ► to select On or Off.
From the PICTURE menu, press ▲ or ▼
to select DNR.
4:3 Stretch
When 4:3 stretch is activated, this function
will switch 4:3 format programmes into a full
screen picture.
Press ◄ or ► to select Auto, Off, Low,
Middle or High.
Note:
This function is not available for PC input.
From the FUNCTION menu, press ▲ or
▼ to select 4:3 stretch.
MPEG NR – Noise Reduction
Press ◄ or ► to select On or Off.
When watching a DVD, the compression may
cause some words or picture elements to
become distorted or pixelated.
Using the MPEG NR feature reduces this effect
by smoothing out the edges.
Note:
In HDMI signal format, this function is available.
Blue Screen
In the PICTURE menu press ► to select
MPEG NR and press .
When Blue screen is selected the screen will
turn blue and the sound will be muted when no
signal is received.
Press ◄ or ► to select Off, Low, Middle
or High.
From the FUNCTION menu, press ▲ or
▼ to select Blue screen.
Cinema Mode
Press ◄ or ► to select On or Off.
Note:
In the PC input mode, teletext mode, this
function is not available.
A movie film’s picture runs at 24 frames a second,
whereas movie software such as DVD, etc., that
you enjoy watching on television at home runs
at 30 (NTSC) or 25 (PAL) frames a second. To
convert this signal to reproduce a smooth motion
and picture quality, select the Cinema mode.
Side Panel
The Side panel feature lightens or darkens the
band each side of the screen when in 4:3 or
14:9 format. This helps prevent image retention of the band and can also make viewing in
bright or dark conditions more comfortable.
From the PICTURE menu select Picture
settings and press .
Press ▲ or ▼ to select Cinema mode
From the FUNCTION menu, press ▲ or
▼ to select Side panel.
Press ◄ or ► to adjust the settings as
required.
Press ◄ or ► to select On or Off.
Reset Picture Settings
This feature allows you to reset the current
Picture Settings to the default values.
Picture still
In the PICTURE menu press ► to select
Picture Settings and press .
Press
to freeze the picture.
Even if an image is frozen on the TV screen,
the pictures are running on the input source.
Audio continues to be output as well.
To return to a moving picture, press
again.
Press ▲ or ▼ to select Reset.
Press
.
Auto Format (Widescreen)
When this television receives a true Widescreen
picture and Auto format is On, it will automatically
be displayed in Widescreen format, irrespective
of the television’s previous setting.
24
Note:
If you use this function except for the purpose
of your private viewing and listening, it
may infringe the copyright protected by the
copyright laws.
The Photo Viewer allows you to playback JPEG files from a USB storage device.
Photo Viewer specifications
Press ▲ or ▼ to select the file name of
the photo you want to view.
When you select a folder name, press
OK to move to the next hierarchy.
To move back to the previous hierarchy,
press ▲ or ▼ key to highlight the folder
and press OK.
Data type: JPEG Exif ver2.2
File format: DCF ver1.1
Maximum number of files: 2048 files
Maximum photo resolution: 8196 x 8196 pixels
PLEASE NOTE
Press OK to view the selected photo.
• Gently insert the USB device into the port and do not
remove while viewing Media Player.
• USB device: USB Mass Storage Class device (MSC)
• Connectivity is not guaranteed for all devices.
• Connect the USB device to the TV directly.
• Do not use a USB hub.
• You must obtain any required permission from
copyright owners to use copyright content. Toshiba
cannot and does not grant such permission.
• To view the previous or next photo, press ▲
or ▼.
• To rotate the photo, press ◄ or ►.
Press
to display file status information
(content number, photo title, shooting date and
time, resolution etc.). The information will be
removed by time-out (about 15 sec) or pressing
again.
Slideshow
Opening Photo Viewer
This view allows you to watch the slide show
of the photos. In this view mode, the only
contents it locates on the same directory shall
be played.
To start Slideshow, press OK when viewing a
photo. Slideshow stops at the last photo in the
directory.
Press
to display file status information.
The information will be removed by time-out
(about 15 sec) or pressing
again.
To open Photo Viewer:
Press
to MEDIA.
Gently insert a supported USB storage
device to the USB port on the side of the
TV. The Photo Viewer will open.
Note: If inserting and removing the USB
connector frequently, the Photo Viewer
may not appear.
Viewing Photo Files
To set Interval time and Repeat
settings for Slideshow
To View Photos
Press QUICK to open the Quick access
when viewing a photo.
Press ▼ or ▲to select either Interval
Time or Repeat.
Press ◄ or ► to adjust the setting and
press OK.
Press ◄ or ► to select
photos.
Note: If Repeat is On, Slideshow starts photo
viewing from the first photo in the folder after
reaching the final photo.
to view
25
English
Enjoying Photo through USB Port
English
Enjoying Music through USB Port
The MP3 Player allows you to playback MP3 files from a USB storage device.
Music Player specifications
• To select the previous or next MP3, press ▼
or ▲.
• Press ◄ or ► to:
• : go to the previous MP3
• / : play or pause the selected MP3
• : stop play
• : go to the next MP3
• : rewind the selected MP3
• : fast forward the selected MP3
• : select the desired repeat interval:
- No Repeat
- Repeat 1: repeat the selected MP3 once
- Repeat Dir: repeat all MP3 files in the
selected folder
• : select the desired equalizer setting:
- Normal
- Class
- Rock
- Pop
- Jazz
and press OK to confirm the setting.
File format: MP3
Sampling frequency: 32kHz ~ 48kHz (MPEG
Layer1/2); 8kHz ~ 48kHz (MPEG Layer3)
Bit rate: 32kbps ~ 448kbps (MPEG Layer1/2);
8kbps ~ 320kbps (MPEG Layer3)
Opening Music Player
To open Music Player:
Press
to MEDIA.
Gently insert a supported USB storage
device to the USB port on the side of the
TV. The Music Player will open.
Note: If inserting and removing the USB
connector frequently, the Music Player
may not appear.
Playing Music Files
To Play Music
Press ◄ or ► to select
music.
Media USB Port
The USB Photo Viewer allows you to view
media files from a USB storage device (not all
devices supported).
Open files automatically or manually and view
them directly on the screen.
Supported file formats include: JPEG (Max.
8192 x 8192 pixels, Min. 96 x 96 pixels, YUV
Data); MP3.
Maximum number of files: 2048
Music Player specifications
File format: MP3
Sampling frequency: 32kHz ~ 48kHz (MPEG
Layer1/2); 8kHz ~ 48kHz (MPEG Layer3)
Bit rate: 32kbps ~ 448kbps (MPEG Layer1/2);
8kbps ~ 320kbps (MPEG Layer3)
Does not support TV out when input at Media.
to play
Press ▼ or ▲ to select the file name of
the MP3 you want to play.
When you select a folder name, press
OK to move to the next hierarchy.
To move back to the previous hierarchy,
press ▲ or ▼ key to highlight the folder
and press OK.
Press OK to play the selected MP3.
26
English
Other features
Panel Lock
On Timer Position
Panel lock disables the buttons on the television.
All buttons on the remote control can still be used.
Use the On timer position if you want the TV to
turn itself on in a selected channel.
From the FUNCTION menu, press ▲ or
▼ to select Panel lock.
Press MENU, and then press ◄ or ► to
display the TIMER menu.
Press ◄ or ► to select On or Off.
Press ▲ or ▼ to select On timer position.
Press ◄ or ► to select the channel the
TV should turn on in.
When Panel lock is On, a reminder will appear
when the buttons on the television are pressed. If
the standby button is pressed the television
will switch off and can only be brought out of
standby by using the remote control.
Sleep Timer
The television can be set to turn itself Off after
a certain length of time.
Press MENU, and then press ◄ or ► to
display the TIMER menu.
TIMER
Off
00:00
0
Sleep timer
On timer
On timer Position
Edit
RETURN
Back
Press ▲ or ▼ to select Sleep Timer
(Turn off the TV).
The timer display will set by off, 15, 30,
45, 60, 90, or 120 minutes.
On Timer
This feature allows you to set the television to
turn on automatically to a preset channel at a
certain time of day or after a certain length of
time. When On timer is set to On, the green On
Timer indicator on the front of the television is lit.
Press MENU, and then press ◄ or ► to
display the TIMER menu.
Press ▲ or ▼ to select Sleep timer (Turn
off the TV).
Press ◄ or ► to modify the time the TV
should turn on, or use the number keys to
enter the time.
Note:
The TV will automatically turn itself off after
approximately 15 min if tuner is no signal.
27
English
Text Services and Text Information
This television has a multi-page text memory, which takes a few moments to load. It offers two Modes
of viewing text – Auto will display Fastext, if available. LIST will store your four favourite pages.
Selecting modes
Control Buttons
The text character set will be automatically
chosen based on the language setting in the
SET UP menu.
Below is a guide to the functions of the remote
control text buttons.
Displays the index/initial page:
Press
to access the index/initial page. The
page displayed is dependant on the broadcaster.
Reveals concealed text:
To discover the solutions on quiz and joke
pages press the
button.
Holds a wanted page:
At times it is convenient to hold a page of text.
Press
and
will appear in the top left of the
screen. The page will be held on-screen until
the button is pressed again.
Enlarges the text display size:
Press
once to enlarge the top half of the
page, press again to enlarge the bottom half of
the page. Press again to revert to normal size.
Selects a page while viewing a normal
picture:
Enter the page number then press
, a normal picture will be displayed. The television will
indicate when the page is present by displaying the page number at the top of the screen.
To display news flashes:
Select the news flash page for the chosen
text service (see the index page of your text
service).
By pressing
, news flashes will be displayed as and when they are broadcast. Press
again to cancel the display.
How to change the page:
Press ▲or▼ to change the page.
Press ◄or► to change the sub page when a
sub page is available.
The news flash page must be cancelled before
changing channels.
Select Teletext from the FUNCTION
menu.
Using ◄ or ► to choose from Auto, or
LIST then press EXIT.
Navigating Pages using Auto
If Fastext is available, four coloured titles will
appear at the base of the screen.
To access one of the four given subjects, press
the relevant coloured button on the remote control.
For further information on your particular text
system(s), see the broadcast text index page
or, consult your local Toshiba dealer.
Navigating Pages using LIST
If Fastext is available, four coloured titles with
numbers 100, 200, 300 and 400 have been
programmed into the television’s memory.
To view these pages press the relevant coloured buttons.
To change these stored pages press the relevant
coloured button and enter a new 3 digit number.
This number will change in the top left of the
screen and in the coloured highlight. Press OK
to store. The bars at the bottom of the screen
will flash white. Whenever OK is pressed all four
page numbers showing at the bottom will be
stored and the previous ones will be lost.
If OK is not pressed the selection will be forgotten when text is cancelled.
Other pages may be viewed by entering the 3
digit page number – but DO NOT press OK or
these pages will be stored.
28
English
PC Settings
• Most of the picture controls and functions are available. However features not available will be
greyed out.
• In the PC input mode, the Manual Setting is not displayed.
• First press until the video input mode list appears on the screen, then press ▲ or ▼ and
to select the PC input mode.
in order
• This function may not be available for some signal or if no signal is received.
• The optimum points of the clock phase and sampling clock adjustments may be incomprehensible
according to the input signals.
Horizontal and Vertical Position
Sampling Clock
Connect the PC (as shown in the “Connecting
a Computer” section) and ensure that a picture
is showing on the television screen. The picture
position may now be adjusted to suit personal
preference.
Adjusting the Sampling clock alters the
number of pulses per scan, this will clear vertical lines on the screen.
From the PC Setting menu, press ▲ or
▼ to select Sampling clock.
Press MENU then press ◄ or ► to
display the SET UP menu.
Press ◄ or ► to optimize the picture.
Clock Phase
SET UP
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
OK Enter
English
UK
OK
OK
On
Home
RETURN
The Clock phase matches the PC signal with the
LCD display.
Adjusting this can clear horizontal stripes and
picture blur.
Back
From the PC setting menu, press ▲ or ▼
to select Clock phase.
Press ▲ or ▼ to select PC Setting, and
then press
to display the PC Setting
menu.
Press ◄ or ► to obtain a clear picture.
Press ▲ or ▼ to select an option you
want to adjust. Press ◄ or ► to adjust the
settings as required.
Horizontal position
Vertical position
Sampling clock
Clock phase
Reset
Reset
From the PC setting menu, press ▲ or ▼
to select Reset.
0
0
0
0
OK
Press
.
Note:
When a PC is connected using HDMI none of
these functions will be available.
The screen is disrupted momentarily when adjusting PC settings. This is not a sign of malfunction.
The default settings and adjustment ranges may
vary depending on the input signal format.
29
English
Input Selection and AV Connections
Use the Input Selection feature if the television does not switch over automatically when using an
external device.
Input Selection
Input Signal Selection
Use the Input Selection window if the television
does not switch over automatically.
You can select source of AV or S-VIDEO from
this function.
Pressing , a list will appear on-screen
showing all external equipment. Use ▲ or
▼ to highlight and OK to select.
From the Ext1 (Ext2) Input menu, press ◄ or
► to select AV or S-VIDEO.
AV connection
Model 19/22AV70**
Auto
On
AV
HDMI1 audio
Lipsync
EXT1 input
Note:
• Source display will change to 1S when select
S-VIDEO.
• Ext2 Input for Model Model 26AV70**/
32AV70**/3240LV70**/40LV70**.
HDMI 1 Audio
Model 26/32AV70**
If the connected HDMI source does not support
digital audio, plug the audio cable into PC/HDMI 1
(AUDIO) on the back of the television (as shown
in the “Connecting an HDMI or DVI device to the
HDMI input” section), then use the HDMI 1 Audio
setting.
Press MENU then press ◄ or ► to display the SET UP menu.
SET UP
Model 32/40LV70**
Language
Country
AV connection
PC Setting
Auto Adjust
Automatic Power Down
Location
OK Enter
English
UK
OK
OK
On
Home
RETURN
Back
Press ▲ or
▼ to select AV connection, and then
PRess
to display the AV connection
menu.
Press ◄ or ► to select Auto, Digital or
Analogue.
Note:
19/22/26/32AV70** series does not have HDMI
3 Input.
AV connection
HDMI1 audio
Lipsync
EXT1 input
HDMI displays equipment connected to
Input HDMI on the back or side of the television. It is designed for best performance with
1080i (1080P for 32/40LV70**) high definition
signals.
®
Auto
On
AV
Note:
The Lip Sync function is only available in HDMI
mode.
30
Below are the answers to some of the most common queries.
For more information go to www.toshiba.co.uk
Q
A
Q
A
Select the Manual tuning in the SET
UP menu.
Highlight the station and press OK, then
press ◄ or ► to select Manual fine
tuning.
Why is there no sound or picture?
Check that the television is on and that
all connections are made properly.
There is a picture, but why is there little
or no colour?
When using an external source, if there
is little or no colour, improvements may
sometimes be achieved.
The colour is factory set to Auto to automatically display the best colour system.
Using ▲ or ▼ to adjust to get the best picture and sound. Press OK and then EXIT.
Q
Why doesn’t the remote control work?
With the external source playing, select
Manual setting from the SET UP menu.
A
Check that the batteries aren’t dead or
inserted incorrectly.
Using ▲ or ▼ to choose from Auto,
NTSC 3.58, NTSC 4.43, SECAM or
PAL.
Q
Why are there problems with text?
A
Good performance of text depends on
a strong broadcast signal. If the text is
unreadable or garbled, check the aerial,
satellite or cable connection. Go to the
main index page of the text service and
look for the User Guide. This will explain
the basic operation of text in some
detail.
Q
Why are the four coloured text numbers
visible but no text?
A
Text has been selected while viewing
an external source. No text will appear
on-screen or a box may appear stating
no information is available. Select a
broadcasting channel and press
to
access.
Q
Why are the colours wrong when an
NTSC source is played?
A
Connect the source via a SCART cable
and play. Select Manual setting from
the SET UP menu and set the Colour
System to Auto.
To manually change the colour system:
Q
Why doesn’t the video/DVD being
played show on-screen?
A
Make sure the VCR or DVD player is
connected to the television, then select
the correct input by pressing .
Q
Why is there a good picture but no
sound?
A
Check all cable connections and that
the volume has not been turned down or
that the sound has not been muted.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a
different television station. Manual fine
tuning may help:
31
English
Frequently Asked Questions
English
Q
Why don’t the devices connected via
HDMI operate properly?
A
Make sure to use cables with the HDMI
®
logo (
). Some early HDMI
equipment may not work properly with
the latest HDMI TV products, due to
adoption of new standards.
Q
A
Q
Q
Why are the LEDs on the front of the
television indicate?
A
Check the following table.
Why is the VCR/DVD picture in black
and white?
Check the correct input has been chosen: S-VIDEO or AV.
Why did TV turn off by itself?
A
After roughly 15 minutes without any
input video signal at TV mode or 4 hours
without pressing any keys, the TV will
turn off to save power.
Q
Why is the soundtrack in English when
a different audio language has been
selected?
A
Q
The programme is currently being broadcast with an English soundtrack only.
A
Text has been selected but Teletext
information is currently unavailable on
the current source.
LED-2
LED-1
LED indication
Why is a page number visible at the top
of the screen but no text?
32
Condition
LED-2
LED-1
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
OFF
Green
(Solid)
Power ON
On Timer is NOT set
OFF
Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Display
Broadcast Systems/Channels
PAL-I
UHF UK21-UK69
PAL-B/G
UHF E21-E69
VHF E2-E12, S1-S41
SECAM-L
UHF F21-F69
VHF F1-F10, B-Q
SECAM-D/K
UHF R21-R69
VHF R1-R12
Video Input
PAL, SECAM, NTSC
3.58/4.43
Sound Output
(At 10% Distortion)
16:9
Model 19
22
26
32
40
Input/Output
EXT2
Input
EXT3
Input
21-pin
SCART
RGB
A/V, S-video
Jacks
Phono Jacks
Y, PB/CB,
PR/CR
Audio L + R
Jack
Phono jacks
Video
Audio L + R
HDMI 1/2
Input
HDMI®
PC/HDMI 1
Audio
Input
Phono Jacks
PC
Input
D-sub
Standby
(approx.)
Dimensions
(approx.)
Audio L + R
EXT2
EXT3
Input
Input/Output
Input Phono
A/V, RGB
21-pin
SCART 2
A/V, S-video
Jacks
Phono Jacks
Y, PB/CB,
PR/CR
Audio L + R
EXT4
Input Phono
Jacks
Phono Jacks
Video
Audio L + R
PC
Input
D-Sub
RGB
HDMI 1/2/3
Input
HDMI
PC/HDMI 1
Audio
3.5 Mini Jack
Weight
(approx.)
®
Audio L + R
Visible Screen
Size
(approx.)
Nicam
2 Carrier System
Model 19
47cm
22
55cm
26
66cm
32
80cm
40
102cm
33
80W
32AV70**
100W
32AV70**1
135W
32LV70**
115W
32LV70**1
135W
40LV70**
150W
40LV70**1
200W
22
0.9W
26
0.9W
32
0.9W
40
0.9W
Model 19
35.8cm(H)x48.0cm(W)x18.8cm(D)
22
40.0cm(H)x55.5cm(W)x19.5cm(D)
26
47.0cm(H)x66.5cm(W)x19.2cm(D)
32
56.4cm(H)x79.8cm(W)x23.3cm(D)
40
70.6cm(H)x98.9cm(W)x27.6cm(D)
Model 19
5.5kg
22
6.5kg
26
9.0kg
32AV70**
12.5kg
32AV70**1
10.0kg
32LV70**
12.5kg
32LV70**1
10.0kg
40LV70**
19.0kg
40LV70**1
17.0kg
Headphone Socket
3.5mm Stereo
Operating Conditions
Temperature: 5oC - 35oC
(41oF - 94oF)
Humidity: 20% - 80%
(non-condensing)
Accessories
Remote Control
2 Batteries (AAA 1.5V)
Power Cord
User Manual
Note: 19/22/26/32AV70** series does not have HDMI 3 Input.
Stereo
55W
0.9W
RGB
21-pin
SCART 1
40W
Model 19
MODELS 26/32/40
EXT1
3W + 3W
3W + 3W
5W + 5W
10W + 10W
10W + 10W
Power Consumption Model 19
As specified in
22
EN60107-1: 1997
26
External connections
MODELS 19/22
EXT1
English
Specifications and Accessories
English
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do
not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
The following information is only for EU-member states:
Disposal of products The crossed out wheeled dust bin symbol indicates that products
must be collected and disposed of separately from household waste. Integrated
batteries and accumulators can be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was placed on the market after
August 13, 2005. By participating in separate collection of products and batteries, you will help to
assure the proper disposal of products and batteries and thus help to prevent potential negative
consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your
country, please contact your local city office or the shop where you purchased the product.
Disposal of batteries and/or accumulators.
The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators
must be collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC),
then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will
appear below the crossed out wheeled dust bin symbol.By participating in separate
collection of batteries, you will help to assure the proper disposal of products and batteries and
thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your
country, please contact your local city office or the shop where you purchased the product.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
Printed on recycled paper. 100% Chlorine free.
© TOSHIBA Television Central Europe Sp. z o.o.
All rights reserved.
Reproduction in whole or part without written permission is strictly prohibited.
TOSHIBA Television Central Europe Sp. z o.o.
ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland
Specification is subject to change without notice.
34