Download ARCTIC VR002

Accessories Set VR002
Installation Manual
For further information, please consult www.arctic.ac
Compatibility
nVIDIA GeForce GTX 285, 280, 275, 260+, 260
Accessories
Heatsinks x 8
Screws (M3) x 2
Heatsinks x 7
Screws (M2.5) x 4
Heatsinks x 2
Screws (M2) x 7
Heatsinks x 4
Heatsinks x 2
Washers x 4
Spacers x 4
Mounting plate x 1
Heatsinks x 1
Adhesive Tape x 1
Thermal pad
for NVIO heatsink
(10x 10 x 1mm) x 1
*Thermal adhesive
(3g) x 1
*Be aware that the thermal adhesive comes with a very short shelf life and shall be used within 1 week. We recommend storing the thermal adhesive in a cool area to avoid solidification. Refrigerate after
opening. Additional heatsinks and thermal adhesive are available for purchase at vga.arctic.ac
Installation of NVIO chipset heatsink
1
2
5
Protective Film
Thermal pad
Spacer
Spacer
Adhesive
Tape
X4
Adhesive
Tape
3
4
Spacers x 4
& Adhesive Tape
Washers X 4
Screws (M2.5)
X4
Do not fasten the screws completely in one step. Fasten each screw alternately (screw A-> D -> B -> C) with 2 to 3 clockwise rotations. Repeat until all 4 screws are tightened.
Tips for applying thermal adhesive
How to squeeze out all the glue?
RAM
Voltage regulator
Apply pressure (10 sec)
Cure time
60mins
Caution: Please make sure the heatsinks are not touching any circuit components as it may cause a short circuit to your VGA card.
Installation of RAM and voltage regulator heatsinks
Installation of mounting plate
1
1. Uninstall default mounting plate
Heatsinks align to the Botto
m
Heatsinks align to the right
Heatsinks align to the left
2
2. Install replacement mounting plate
comes with the accessories set
Installation of main cooler
Please follow the installation instructions provided with the main cooler.
ARCTIC Switzerland
Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac
Copyright
2010 ARCTIC Switzerland. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ARCTIC
Switzerland. In no event shall ARCTIC its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.