Download Manual 7243842
Transcript
SELF-DIAGNOSTIC FUNCTION SERVICE MANUAL MODEL KV-21C5B KV-21C5D KV-21C5E KV-21C5K KV-21C5R COMMANDER DEST CHASSIS NO. RM-883 French SCC-Q02H-A RM-883 AEP SCC-Q04K-A RM-883 Spanish SCC-Q05K-A RM-883 OIRT SCC-Q03S-A RM-883 OIRT SCC-Q03R-A FE-1 MODEL COMMANDER KV-21X5A KV-21X5B KV-21X5D KV-21X5E KV-21X5K KV-21X5L KV-21X5R KV-21X5U CHASSIS DEST CHASSIS NO. RM-883 Italian SCC-Q06K-A RM-883 French SCC-Q02J-A RM-883 AEP SCC-Q04L-A RM-883 Spanish SCC-Q05L-A RM-883 OIRT SCC-Q03U-A RM-883 Irish SCC-Q07D-A RM-883 OIRT SCC-Q03T-A RM-883 UK SCC-Q01F-A / N MENU PROGR Layer 1 RM-883 TRINITRON ® COLOR TV ® MICROFILM 1 ITEM MODEL Italian Television System B/G/H French Stereo System GERMAN Stereo B/G/H, D/K, L, I GERMAN/NICAM Stereo Channel Coverage Color System ITALIA VHF : A-H2 (C) UHF : 21-69 PAL B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 PAL, SECAM NTSC4.43, NTSC3.58 (VIDEO IN) L VHF : F02-F10 UHF : F21-F60 CABLE : B-Q B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 ITALIA VHF : A-H2 (C) UHF : 21-69 I UHF : B21-B69 PAL, SECAM NTSC4.43, NTSC3.58 (VIDEO IN) PAL, SECAM NTSC4.43, NTSC3.58 (VIDEO IN) AEP B/G/H GERMAN Stereo PAL B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 ITALIA VHF : A-H2 (C) UHF : 21-69 D/K VHF : R01-R12 UHF : R21-R69 Spanish B/G/H, D/K GERMAN/NICAM Stereo PAL B/G VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 CABLE TV (2) : S01-S05, M1-M10, U1-U10 ITALIA VHF : A-H2 (C) UHF : 21-69 PAL, SECAM NTSC4.43, NTSC3.58 (VIDEO IN) KV-21C5K/21X5K GERMAN/NICAM Stereo B/G/H VHF : E2-E12 UHF : E21-E69 CABLE TV (1) : S1-S41 D/K VHF : R01-R12 UHF : R21-R69 PAL, SECAM NTSC4.43, NTSC3.58 (VIDEO IN) B/G/H, D/K OIRT KV-21C5R/21X5R GERMAN Stereo Irish I NICAM Stereo VHF : A-C, D-J VHF : 21-69 CABLE CHANNELS S1-S20 HYPERBAND S21-S41 PAL NTSC4.43, NTSC3.58 (VIDEO IN) UK I NICAM Stereo UHF : B21-B69 PAL NTSC4.43, NTSC3.58 (VIDEO IN) MODEL 21X5A 21C5B 21X5B 21C5D 21X5D 21C5E 21X5E 21C5K 21X5K 21X5L 21C5R 21X5R 21X5U Power Consumption 72W 72W 72W 72W 72W 72W 72W 105W [PICTURE TUBE] Super Trinitron Approx. 55cm (21 inches) (Approx. 51cm picture measured diagonally) 110 degree deflection [FRONT] Video input - phono jack Audio inputs - phono jacks Headphone jacks : stereo minijack Sound output Power requirements Dimensions Input/Output Terminals [REAR] 21-pin Euro connector (CENELEC standard). Inputs for Audio and Video signals. Inputs for RGB. Outputs of TV Video and Audio signals. - Weight Supplied accessories Other features 2 - 21-pin Euro connector. inputs for Audio and Video signals. inputs for S Video. outputs for Audio and Video signals (selectable). - Phono Jack Outputs for Audio Signals 2 x 14W (Music Power) 220 - 240V Approx 620x457x467mm (KV-21C5) Approx 527x449x466mm (KV-21X5) Approx 22kg (KV-21C5) Approx 23kg (KV-21X5) RM-883 Remote Commander (1) IEC designated R6 battery (2) NICAM*, FASTEXT, TOPTEXT *(KV-21C5B/21C5E/21C5K/ KV-21X5B/21X5E/21X5K/ KV-21X5L/21X5U only) 2 [RM-883] Remote control system Power requirements Dimensions Weight Infrared control 1.5V dc 2 batteries IEC designation R6 (size AA) Approx 65x225x21mm (w/h/d) Approx 157g (Not including battery) Design and specifications are subject to change without notice. Model Name KV-21C5B KV-21C5D KV-21C5E KV-21C5K KV-21C5R KV-21X5L KV-21X5B KV-21X5D KV-21X5E KV-21X5K KV-21X5R KV-21X5U KV-21X5A Item Pal Comb OFF OFF OFF OFF OFF OFF OFF PIP OFF OFF OFF OFF OFF OFF OFF RGB Priority OFF ON ON ON OFF OFF OFF Woofer Box OFF OFF OFF OFF OFF OFF OFF Scart 1 ON ON ON ON ON ON ON Scart 2 ON ON ON ON ON ON ON Front in (3) ON ON ON ON ON ON ON Scart 4 OFF OFF OFF OFF OFF OFF OFF Projector OFF OFF OFF OFF OFF OFF OFF AKB in 16:9 mode ON ON ON ON ON ON ON Norm B/G ON ON ON ON ON ON OFF Norm I OFF ON OFF OFF OFF OFF ON Norm D/K OFF ON OFF ON ON ON OFF Norm AUS OFF OFF OFF OFF OFF OFF OFF Norm L OFF ON OFF OFF OFF OFF OFF Norm SAT OFF OFF OFF OFF OFF OFF OFF Norm M OFF OFF OFF OFF OFF OFF OFF Teletext ON ON ON ON ON ON ON Nicam Stereo OFF ON OFF ON ON OFF ON Italian French German Spanish OIRT OIRT English Language Preset WARNING (KV-21X5L/KV-21X5U only) The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 5 AMP capacity. Should the fuse need to be replaced, use a 5 AMP FUSE approved by ASTA to BS 1362, ie one that carries the ASA T mark. IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE OUTLET SOCKET. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. How to replace the fuse. Open the fuse compartment with a screwdriver blade and replace the fuse. FUSE 3 21 pin connector ( 1/ , 2/ ) Pin No 1 2 4 1 21 20 19 16 15 2 Audio output B (right) Standard level : 0.5V rms Output impedence : More than 10kohm* 3 Audio output A (left) Standard level : 0.5V rms Output impedence : Less than 1kohm* 4 Ground (audio) 5 Ground (blue) 6 Audio input A (left) Standard level : 0.5V rms Output impedence : More than 10kohm* 7 Blue input 0.7 +/- 3dB, 75 ohms positive 8 Function select (AV control) High state (9.5-12V) : Part mode Low state (0-2V) : TV mode Input impedence : More than 10K ohms Input capacitance : Less than 2nF 9 Ground (green) 10 Open 11 Green 12 Open 13 Ground (red) 14 Ground (blanking) _ 15 Green signal : 0.7 +/- 3dB, 75 ohms, positive _ _ Red input 0.7 +/- 3dB, 75 ohms, positive (S signal Chroma input) 0.3 +/- 3dB, 75 ohms, positive High state (1-3V) Low state (0-0.4V) Input impedence : 75 ohms 14 16 Blanking input (Ys signal) 12 17 Ground (video output) 10 18 Ground (video input) 8 19 Video output 1V +/- 3dB, 75ohms, positive sync 0.3V (-3+10dB) Video input 1V +/- 3dB, 75ohms, positive sync 0.3V (-3+10dB) Video input Y (S signal) 1V +/- 3dB, 75ohms, positive sync 0.3V (-3+10dB) 13 11 9 7 _ 6 5 Signal level Standard level : 0.5V rms Output impedence : Less than 1kohm* 18 17 Signal Audio output B (right) 20 4 3 2 _ _ 21 Common ground (plug, shield) 1 Connected 4 Not Connected (open) * at 20Hz - 20kHz TABLE OF CONTENTS Section Title Page Section 1. GENERAL Overview of TV buttons Using Select Mode Adjusting the Picture Adjusting the Sound Using the Sleep Timer Using the Wake Up Timer Viewing Teletext Exchanging Programme Pos Manually Tuning the TV Fine-Tuning Channels Using Optional Equipment Troubleshooting .....................6 .....................6 .....................7 .....................7 .....................8 .....................8 .....................9 .....................9 .....................10 .....................10 .....................11 .....................11 4-1. 4-2. 4-3. Page 5-1. 5-2. 5-3. 5-4. 5-5. Rear Cover Removal Chassis Assy Removal Service Position S1 Board Removal Picture Tube Removal Removal and Replacement of the Main-Bracket bottom plates Electrical Adjustments Test Mode 2 FE-1 Self Diagnostic Software .....................20 .....................23 .....................24 5. DIAGRAMS 2. DISASSEMBLY 2-1. 2-2. 2-3. 2-4. 2-5. 2-6. Title 4. CIRCUIT ADJUSTMENTS .....................12 .....................12 .....................13 .....................13 .....................14 Block Diagram Circuit Board Location Schematic Diagrams and Printed Wiring Boards * A Board * S1 Board * C Board Semiconductors IC Blocks .....................25 .....................30 .....................30 .....................35 .....................40 .....................43 .....................45 .....................47 6. EXPLODED VIEWS 6-1. 6-2. 6-3. 6-4. .....................15 KV-21C5 Chassis KV-21C5 Picture Tube KV-21X5 Chassis KV-21X5 Picture Tube .....................48 .....................49 .....................50 .....................51 3. SET-UP ADJUSTMENTS 7. ELECTRICAL PARTS LIST 3-1. 3-2. 3-3. 3-4. Beam Landing Convergence Screen [G2] White Balance Focus .....................52 .....................16 .....................17 .....................19 .....................19 CAUTION ATTENTION SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR THE CARBON PAINTED ON THE CRT, AFTER REMOVAL OF THE ANODE CAP APRES AVOIR DECONNECTE LE CAP DE’LANODE, COURT-CIRCUITER L’ANODE DU TUBE CATHODIQUE ET CELUI DE L’ANODE DU CAP AU CHASSIS METALLIQUE DE L’APPAREIL, OU AU COUCHE DE CARBONE PEINTE SUR LE TUBE CATHODIQUE OU AU BLINDAGE DU TUBE CATHODIQUE. WARNING !! AN ISOLATING TRANSFORMER SHOULD BE USED DURING ANY SERVICE WORK TO AVOID POSSIBLE SHOCK HAZARD DUE TO LIVE CHASSIS. THE CHASSIS OF THIS RECEIVER IS DIRECTLY CONNECTED TO THE POWER LINE. ATTENTION !! AFIN D’EVITER TOUT RISQUE D’ELECTROCUTION PROVENANT D’UN CHÁSSIS SOUS TENTION, UN TRANSFORMATEUR D’ISOLEMENT DOIT ETRE UTILISÈ LORS DE TOUT DÈPANNAGE. LE CHÁSSIS DE CE RÈCEPTEUR EST DIRECTMENT RACCORDÈ Á L’ALIMENTATION SECTEUR. SAFETY-RELATED COMPONENT WARNING !! COMPONENTS IDENTIFIED BY SHADING AND MARKED ON THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AUX COMPOSANTS RELATIFS Á LA SÈCURITÈ !! LES COMPOSANTS IDENTIFIÈS PAR UNE TRAME ET PAR UNE MARQUE SUR LES SCHÈMAS DE PRINCIPE, LES VUES EXPLOSÈES ET LES LISTES DE PIECES SONT D’UNE IMPORTANCE CRITIQUE POUR LA SÈCURITÈ DU FONCTIONNEMENT, NE LES REMPLACER QUE PAR DES COMPSANTS SONY DONT LE NUMÈRO DE PIÈCE EST INDIQUÈ DANS LE PRÈSENT MANUEL OU DANS DES SUPPLÈMENTS PUBLIÈS PAR SONY. 5 SECTION 1 GENERAL The operating instructions mentioned here are partial abstracts from the Operating Manual. The page numbers of the Operating Instruction Manual remain as in the manual. Basic TV Features Additional TV Features Overview of TV Buttons Using Select Mode You can select different preset picture and sound modes. 1 / On/Off Switch. Auto Tune Button. OFF OK 3 6 To Select Channels Press to select channels. For double-digit programme numbers, e.g. 23, press -/-- first, then the buttons 2 and 3. If you enter an incorrect first digit, this should be corrected by entering another digit (0 - 9) and then selecting -/-- button again to enter the programme number of your choice Live Mode -for live broadcast programmes PROGR Press to temporarily switch off TV. Press again to switch on TV from standby mode. To save energy we recommend switching off completely when TV is not in use. NOTE: After 15 - 30 minutes without a TV signal and without any button being pressed, the TV switches automatically into standby mode. 4 Press the MENU button to remove the menu display from the TV screen. RM-883 Note: The mode selected in step 3 is now stored. Changing Modes Quickly 1 Press the button on the remote control to display the three different modes. 2 Press the mode. MENU To Reveal On Screen Information Press to reveal all on-screen indications. Press again to cancel. To Change Screen Format Press to view programmes in 16:9 mode. Press again to return to 4:3 mode. Press the blue button to select the desired mode: Movie Mode - for films To Temporarily Switch Off TV / SELECT Personal Mode - reverts to settings made in “Adjusting the Picture and Sound” sections of the manual Overview of Remote Control Buttons Press to mute TV sound. Press again to restore the sound. With the cursor pointing at the symbol on the TV screen as shown, press the yellow button. SELECT OFF MENU To Mute Sound SELECT Volume Control Buttons. Programme Up or Down Buttons. (selects TV channels). L/G/S/I R/D/D/D 2 SELECT OFF 2 Video Input Button. (selects input signals from VCR etc.). Press the MENU button on the remote control to display the menu on the TV screen. PROGR To Adjust TV Volume To Select Channels Press to adjust the volume of the TV. Press to select channels. RM-883 7 8 button again to select your desired Additional TV Features Additional TV Features Adjusting the Picture Adjusting the Sound Although the picture is adjusted at the factory, you can modify it to suit your own requirement. Although the sound is adjusted at the factory, you can modify it to suit your own requirement. 1 / 2 3 1 Press the button on the remote control to display the three different modes on the TV screen. Press the symbol / 2 button to highlight the personal mode as shown. Press the MENU button to display the menu on the TV screen. 3 SELECT MENU Press the button on the remote control to display the three different modes on the TV screen. Press the button to highlight the personal mode symbol as shown. Press the MENU button to display the menu on the TV screen. SELECT MENU OFF OFF 4 PROGR Press the blue button on the control to select the symbol on the TV screen then press the yellow button. 4 SELECT Press the blue button to select the symbol on the TV screen then press the yellow button. SELECT PROGR OFF OFF 7 5 Press the blue button to select the item you wish to change (see below). RM-883 5 IIIIIIIIIIIIIII - - - - - IIIIIIIIIIIIIII - - - - - IIIIIIIIIIIIIII - - - - - - Press the blue button to select the item you wish to change (see below). RM-883 IIIIIIIIIIIIIII - - - - - IIIIIIIIIIIIIII - - - - - - IIIIIIIIIIIIIIIIIIIIIII - - - - - IIIIIIIIIIIIIIIII - - - - - - - - - Press the red or yellow button to alter the selected item. 6 Press the red or yellow button to alter the selected item. 7 Press the MENU button to remove the menu display from the TV screen. 7 Press the MENU button to remove the menu display from the TV screen. Symbol Item • • • • • • • ON OFF IIIIIIIIIIIIIII- -IIIIIIIIIIIIIII 6 Symbol MONO STEREO DSP Contrast Colour Brightness Sharpness Hue control (only for NTSC video signals) Reset - resets to factory preset picture level Represents the mode selected in the “Using Select Mode” section. DSP 9 10 Item • Mono/Stereo A:Channel 1 sound or Mono sound/ B:Channel 2 sound (to select your desired language from a dual sound broadcast) • On/Off (digital sound processor) • Treble • Bass • Balance • Reset (resets to factory preset sound level) • Represents the mode selected in the “Using Select Mode” section of the manual. Additional TV Features Additional TV Features Using the Sleep Timer Using the Wake Up Timer The TV may be set to switch automatically to the standby mode after a length of time chosen by you. You may set the time in 15 minute steps up to 4 hours. The TV may be set to switch on automatically after a length of time chosen by you. You may set the time in 15 minute steps up to 12 hours. 1 / Press the MENU button on the remote control to display the menu on the TV screen. 1 SELECT / SELECT OFF OK Press the MENU button on the remote control to display the menu on the TV screen. SELECT SELECT OFF OK OFF OFF 2 Press the blue button on the control to select the symbol on the TV screen, then press the yellow button. 2 SELECT Press the blue button on the control to select the symbol on the TV screen, then press the yellow button. OFF OFF 3 MENU 3 Press the yellow button repeatedly until the required amount of time delay appears on the screen. SELECT 0:45 MENU OFF 4 PROGR Press the blue button on the control to select the symbol on the TV screen, then press the yellow button. Press the red or yellow button to set the time. OFF OFF OFF 0:45 PROGR 4 8 RM-883 Once the time delay has been selected, press the MENU button to remove the on-screen display. One minute before standby, the display shown appears on the screen. 0:00 (OFF) 0:15 0:30 0:45 -----12:00 5 0:59 RM-883 / Press the standby button . The standby indicator on the TV flashes regularly to indicate that the Wake Up Timer is active. After the selected length of time, the TV switches on automatically. Notes: • When watching TV, press the time remaining. Notes: button to display • If you use the “Wake Up Timer” to switch the TV on and for one hour after switching on, no TV or Remote Control button is pressed, the TV switches itself back into Standby mode and the indicator on the TV lights. • To return to normal operation from standby mode, button. press the / • Any temporary power failure will cause a misfunction in the “Wake Up Timer” and you will have to reset the “Wake Up Timer”. 11 12 Additional TV Features Additional TV Features Viewing Teletext Exchanging Programme Positions Teletext is an information service transmitted by most TV stations. After tuning you may wish to change the order in which the channels appear on the TV. You may wish for example to exchange the channel on programme number 8 with the channel on programme number 4. Selecting Teletext / 1 Press a number button on the remote control to select the channel which carries the teletext service you wish to receive. 2 Press the button on the remote control to switch on teletext. 1 SELECT OFF OK 2 TELETEXT TELETEXT Index Index Programme 25 News 153 Sport 101 Programme 25 News 153 Sport 101 Weather 4 Press the blue button on the control to select the TV screen, then press the yellow button. on SELECT 98 98 OFF Input three digits for the page number using the numbered buttons on the control. 3 MENU SELECT OFF Weather 3 Press the MENU button on the remote control. / Press the Press the blue button to select yellow button. then press the MENU button to switch off teletext. PROGR C S CH 05 01 IIIIIIIIIIIIIII - - - - - F COO Note: Teletext errors may occur if the broadcasting signals are weak. 4 With the cursor pointing at PROGR on the TV screen as shown, press PROGR + or - button until the channel you wish to rearrange appears on screen, then press the blue button once. 5 Press the red or yellow button to select the new programme number (e.g. PROGR 04) for your selected channel. PROGR - + 04 6 Press the blue button to select then press the yellow button to exchange the channels. PROGR - + 04 7 Repeat steps 4 to 6 if you wish to change the order of the other channels on your TV, then press MENU to return to normal TV screen. 8 Press the PROGR+/- button to view your selected channels on their new programme numbers. PROGR PROGR 9 Using Other Teletext Functions TELETEXT To Superimpose Teletext on to the TV Index Programme RM-883 once in teletext mode or twice in TV mode to Press superimpose teletext on to the TV screen. Press 25 News 153 Sport 101 Weather 98 RM-883 again to cancel teletext mode. TELETEXT Index To Move to Next or Preceding Page Press PROGR +/- on the remote control to select the previous or next page. PROGR - + 01 Programme 25 News 153 Sport 101 Weather 98 To Freeze a Teletext Page on the control to freeze the page. Press Press again to cancel the freeze. Revealing concealed information (eg: answers to a quiz). to reveal information. Press Press again to conceal the information. Using colour buttons to access pages (Fastext/TOPtext) When the colour coded menu appears at the bottom of a page, press the colour button (green, red, yellow or blue) to access the corresponding page. 13 14 on Additional TV Features Additional TV Features Manually Tuning the TV Fine-Tuning Channels You have already tuned the TV to receive all available channels using the `Automatically Tuning the TV' procedure at the start of this manual. You can however carry out this operation manually using the following instructions. If a channel is slightly off tune, you can use this fine tune procedure to obtain a better picture reception. 1 / Press the MENU button on the remote control to display the menu on the TV screen. 1 SELECT / SELECT OFF OK OFF 2 Press the blue button to select the symbol on the TV screen then press the yellow button. With the channel you wish to fine-tune on the screen, press the MENU button on the remote control. The menu display appears on the TV screen. SELECT SELECT OFF OK OFF SELECT 2 OFF Press the blue button on the remote control to select the symbol on the TV screen then press the yellow button. SELECT OFF 3 MENU 4 PROGR With the cursor pointing at PROGR on the TV screen as shown, press PROGR + or - button on the remote control to allocate a programme number to the channel (eg PROGR 01). For double digit numbers e.g. 55, press the -/-- button on the remote control then the corresponding numbered buttons. PROGR C S CH 05 Press the blue button to select the channel type (C to preset a regular channel or S to preset a cable channel) then press the yellow button to highlight the desired channel type. PROGR C S CH 05 01 IIIIIIIIIIIIIII - - - - MENU F 3 on COO Press the blue button to select the F symbol on the TV screen then press the red or yellow button to adjust the tuning. F COO F 6 If you do not wish to store this channel on the programme number you selected, press the yellow or red button to continue searching for the desired channel. 7 If this is the channel you wish to store, press the symbol on the screen blue button to select the then press the yellow button to store. PROGR C S CH 05 F COO PROGR C S CH 05 F COO 8 on PROGR 4 on Press the blue button to select the symbol on the TV screen then press the yellow button to store. 10 RM-883 Press the blue button to select the tuning bar scale then press the yellow or red button once to start the channel search. (Yellow to search up the scale or red to search down). When a channel is found it appears on the TV screen. 01 IIIIIIIIIIIIIII - - - - - 01 IIIIIIIIIIIIIII - - - - - COO 5 PROGR C S CH 05 PROGR C S CH 05 F COO 01 RM-883 IIIIIIIIIIIIIII - - - - on 5 01 IIIIIIIIIIIIIII - - - - on Repeat steps 3 to 7 if you wish to store more channels then press the MENU button to remove the menu from the TV screen. 15 16 Press the MENU button to remove the menu from the TV screen. 01 IIIIIIIIIIIIIII - - - - on Optional Connections Additional Information Using Optional Equipment Troubleshooting You can connect optional audio or video equipment to your TV, such as a VCR, a camcorder or video games as shown. Here are some simple solutions to problems which may affect the picture and sound. Front of TV Problem Solution Select and View the Input Signal 1 Connect your equipment to the designated TV socket. 2 Press the button repeatedly on your remote control until the correct input symbol appears on the TV screen. Symbol 1 2 Input signals A • Audio/video input signal through the Euro AV connector D • RGB input signal through the Euro AV connector D B No picture (screen is dark), no sound • Plug the TV in. button on the front of TV. • Press the • If the indicator is on press / button or a programme number button on the remote control. • Check the aerial connection. • Check that the selected video source is on. • Turn the TV off for 3 or 4 seconds and then turn it on again using the button on the front of the TV. C L/G/S/I R/D/D/D Poor or no picture (screen is dark), but good sound • Using the MENU system, select the Picture Adjustment display. Adjust the brightness, picture and colour balance levels. to • From the Picture Adjustment display select return to the factory settings. Poor picture quality when watching a RGB video source. • Press the button repeatedly on the remote control is displayed on the screen. until the RGB symbol Good picture, no sound • Press the +/– button on the remote control. is displayed on the screen, press the button • If on the remote control. No colour on colour programmes • Using the MENU system, select the Picture Adjustment display. Adjust the colour balance. to • From the Picture Adjustment display select return to the factory settings. Distorted picture when changing programmes or selecting teletext • Turn off any equipment connected to the 21 pin Euro connector on the rear of the TV. Remote control does not function • Replace the batteries. Noisy picture when viewing TV channel • Adjust fine tuning to obtain better picture reception. The standby indicator on the TV flashes even though the “Wake Up Timer”is not in use. • Contact your nearest Sony service centre. • Audio/video input signal through the phono sockets A and B 3 Switch on the connected equipment. 4 To return to normal TV picture, press the control. 8mm/Hi8 camcorder button on the remote Note: To avoid picture distortion, do not connect equipment to the A and D connectors at the same time. Rear of TV 11 Additional Information Connecting a VCR We recommend you tune in the VCR signal to TV programme number `0' using the `Manually Tuning in the TV' section of this instruction manual. D Connecting Headphones Plug in your headphones to the socket C on the front of the TV set. E F G For Mono Equipment Connect the phono plug to the L/G/S/I socket on the front of the TV and select 2 input signal using the instructions above. Finally, refer to the `Adjusting the Sound' section of this manual and select `A' on the sound menu screen. s 2/ L/G/S/I 1/ R/D/D/D 2 1 “PlayStation” 1 2 VCR • Decoder 18 If you continue to have these problems, have your TV serviced by qualified personnel. • NEVER open the casing yourself. 19 SECTION 2 DISASSEMBLY 2-1. REAR COVER REMOVAL 3 Rear Cover 3 Rear Cover 2 4 Screws BTV 4x16 2 6 Screws BTV 4x16 1 1 Screw BTV 4x16 1 1 Screw BTV 4x16 2-2. CHASSIS ASSY REMOVAL Release the clip indicated from underneath beznet 12 2-3. SERVICE POSITION 2-4. S1 BOARD REMOVAL Release the clip indicated 13 2-5. PICTURE TUBE REMOVAL 9 Two DGC holders 6 Chassis assy 10 Degaussing coils 11 Spring Extension 4 Speaker KV-21X5 only 7 C Board 3 Two Screws KV-21X5 only 8 Deflection Yoke 12 Four PT screws (M) 5 Anode cap 2 Speaker KV-21X5 only 1 Two Screws KV-21X5 only 13 Picture tube Cushion • REMOVAL OF ANODE-CAP Note : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode. * REMOVING PROCEDURES. c a b b Anode button 1 Turn up one side of the rubber cap in the direction indicated by the arrow a 2 Using a thumb pull up the rubber cap 3 When one side of the rubber cap is firmly in the direction indicated by the separated from the anode button, the arrow b anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c • HOW TO HANDLE THE ANODE-CAP 1 2 To prevent damaging the surface of the anode-cap do not use sharp materials. Do not apply too great a pressure on the rubber, as this may cause damage to the anode connector. A metal fitting called a shatter hook terminal is fitted inside the rubber cap. Do not turn the rubber foot over excessively this may cause damage if the shatter hook sticks out. 3 14 £ REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET BOTTOM PLATES. (1) REMOVING THE PLATES (2) In the event of servicing being required to the solder side of the A Board printed wiring board, the bottom plates fitted to the main chassis bracket require to be removed. This is performed by cutting the gates with a sharp wire cutter at the locations shown and indicated by arrows. For safety reasons, on no account should the plates be removed and not refitted after servicing. REFITTING THE PLATES Because the plates differ in size it is important that the correct plates are refitted in their original location. Please note that the plates need to be rotated 180 degrees from the cut position to allow the tabs to be fitted in the catch positions. Note :There are 2 plates fitted to the main bracket and secured by 4 gates. Only remove the necessary plate to gain access to the printed wiring board. Catch Catch Gate Gate Catch 15 Gate Tab Gate Tab Tab Gate Tab Gate Catch Refitting Tab Gate Catch Gate SECTION 3 SET-UP ADJUSTMENTS • • • Carry out the following adjustments in this order : When complete readjustment is necessary or a new picture tube is installed, carry out the following adjustments. Unless there are specific instructions to the contrary, carry out these adjustments with the rated power supply. Unless there are specific instructions to the contrary, set the controls and switches to the following settings : Contrast ............... 80% [or remote control normal] Brightness ............... 50% 3-1. 3-2. 3-3. 3-4. Note : 2. Test equipment required 1. Color bar/pattern generator. 2. Degausser. 3. Oscilloscope. 4. Digital multimeter. 5. DC Power supply. Fig. 3-2 Preparation: 1. Beam Landing Convergence White balance Focus For 29" models align the neck assy as indicated below. In order to reduce the influence of geomagnetism on the set’s picture tube, face it in an easterly or westerly direction. Switch on the TV set’s power and degauss with the degausser. Purity Control 3-1. BEAM LANDING A buckle Neck Assy 1. 2. 3. 4. 5. 6. 7. Input an all-white signal from the pattern generator. Set the Contrast and Brightness to normal. Set the pattern generator raster signal to all Red. Move the deflection yolk forward and adjust with the purity control so that the Red is at the centre and the Blue and Green take up equally sized areas on each side of the screen. [See Fig.3-1 - 3-3]. Move the deflection yolk forward and adjust so that the entire screen becomes Red. [See Fig.3-1]. Switch the raster signal to Blue, then to Green and verify the purity condition. When the position of the deflection yolk has been determined, fasten the deflection yolk with the screws. If the beam does not land correctly in all the corners, use magnets to correct it. [See Fig.3-4]. G1 G2 Deflection Yoke GREEN RED BLUE Fig. 3-3 Disk magnets or rotatable disk magnets correct these areas (a - d). Purity control corrects this area. a b c d Deflection yolk positioning corrects these areas. a c b Fig. 3-1 d Fig. 3-4 16 3-2. CONVERGENCE • Tilt the V.STAT magnet and adjust the static convergence by opening or closing the V.STAT magnet. 4. If the V.STAT magnet is moved in the direction of the a and b arrows, the Red, Green and Blue points move as indicated below. Preparation: • • • Before starting this adjustment, adjust the focus, horizontal size and vertical size. Minimize the Brightness setting. Input a dot pattern from the pattern generator. (1) Horizontal and vertical static convergence Centre dot R G B R G B V.STAT Magnet H.STAT C Board RV701 SCREEN RV702 1. 2. 3. [Moving horizontally], adjust the H.STAT control so that the Red, Green and Blue points are on top of each other at the centre of the screen. [Moving vertically], adjust the V.STAT magnet so that the Red, Green and Blue points are on top of each other at the centre of the screen. If the H.STAT variable resistor is unable to bring the Red, Green and Blue points together at the centre of the screen, adjust the horizontal convergence with the H.STAT variable resistor and the V.STAT magnet in the manner indicated below. [In this case, the H.STAT variable resistor and the V.STAT magnet influence each other]. 17 (2) Operation of the BMC (Hexapole) magnet. R G R B R G B B R G B G R R G B G B V.STAT Purity BMC (Hexapole) • The respective dot position resulting from moving each magnet interact, so be sure to perform adjustment whilst tracking. Use the H.STAT VR to adjust the Red, Green and Blue dots so that they coincide at the centre of the screen [by moving the dots in the horizontal direction]. (3) Dynamic convergence adjustment. Preparation: • 1. 2. 3. Before starting this adjustment, adjust the horizontal and vertical static convergence. Slightly loosen the deflection yolk screws. R B G B R R G B G B G G B 4. 5. Remove the deflection yolk spacer. Move the deflection yolk as indicated in the figure below and optimize the convergence. Tighten the deflection yolk screws. Re-install the deflection yolk spacer. G B B R G B R B R R G R R G B G B G R 18 R G R B 3-3. Screen [G2], White balance (4) Screen corner convergence. • If you are unable to adjust the corner convergence properly, this can be corrected by the use of permalloy assemblies. a G2 Setting 1. 2. 3. b 4. a-d: screen-corner convergence defect d c Input a dot signal from the pattern generator. Set the Picture, Brightness and Colour to minimum. Apply 170Vdc from an external power supply to the R, G and B cathodes of the CRT. Whilst watching the picture, adjust the G2 control [RV701 SCREEN] located on the C Board to the point just before the flyback return lines disappear. White balance adjustment 1. 2. 3. 4. 5. Fit the permalloy assembly to the rear of the CRT to correct the area at fault. 6. 7. 8. a 10. b Input a ‘PAL’ all-white signal from the pattern generator. Enter into the Service Mode. Enter into the ‘Picture’ service menu. Select the ‘Green drive’ and adjust so that the White Balance becomes optimum. Select the ‘Blue drive’ and adjust so that the White Balance becomes optimum. Set the Picture to MIN. Set the ‘R-cut-off’ to 07. Adjust the ‘G-cut-off’, and the ‘B-cut-off’ so that the White Balance becomes optimum. Press the button to return to TV operation. PICTURE Permalloy c d R - Drive Adj G - Drive Adj B - Drive Adj R - cut - off Adj G - cut - off Adj B - cut - off Adj ID - start 02 ID - stop 01 ID - level 01 Bellfo Adj Sub Colour Adj Sub Brightness Adj 3-4. FOCUS 1. 2. 3. Input a Phillips colour pattern Set the picture settings to normal. Adjust the focus control located on the Flyback transformer to bring the centre of the screen into focus. Note :Bring only the centre area of the screen into focus, switch to an all-white pattern and confirm that the magenta ring is hardly noticed. To obtain optimum focus balance the focus setting between optimum screen centre focus and a reduced magenta ring level. FOCUS 19 SECTION 4 CIRCUIT ADJUSTMENTS 4-1. ELECTRICAL ADJUSTMENTS Service adjustments to this model can be performed using the supplied Remote Commander RM-883. PICTURE HOW TO ENTER INTO SERVICE MODE 1. 2. Turn on the main power switch and enter into the stand-by mode. Press the following sequence of buttons on the Remote Commander. i+ 5 + (ON SCREEN DISPLAY) (DIGIT 5) (VOLUME +) • 3. (TV) ‘TT--’ will appear in the upper right corner of the screen. Other status information will also be displayed. Press ‘MENU’ on the remote commander to obtain the following menu on the screen. Adj B - Drive Adj R - cut - off Adj G - cut - off Adj B - cut - off Adj ID - start 02 ID - stop 01 ID - level 01 Bell-f0 Adj Sub Colour Adj Sub Brightness Adj V centre Adj V size Adj V Lin Adj S Corr Adj H Cent Adj H Size Adj Pin Amp Adj Geometry Corner Pin Adj Sound Pin Phase Adj TV Status V Bow Adj AGC Adjust V Angle Adj Technical Upper V Lin Adj > Picture 5. 6. Adj G - Drive GEOMETRY TEST MENU 4. R - Drive Move to the corresponding adjustment item using the ‘Green’ [up] or ‘Blue’ [down] buttons on the Remote Commander. Press the ‘Yellow’ button to enter into the required menu item. Press the ‘Menu’ button on the Remote Commander to quit the Service Mode when all adjustments have been completed. Lower V Lin Adj Left HBLK 07 Right HBLK 07 CD Mode (AV) 01 SOUND Nicam Error Lower 20 Nicam Error Upper 80 Nicam Error Rate xx [Status only] AGC Gain Level xx [Status only] TV STATUS Note :The data shown in the ‘TV STATUS’ table is dependant on destination and country. 20 Destination A/L/E/U/D/B/K/R Text Language East/West Note: Ensure that no signal is applied to the Antenna socket while carrying out the following IF adjustments. TECHNICAL SYSTEM B/G, D/K, I & L I.F ADJUSTMENT GD - Secam 30 BD - Secam RC - Secam 31 11 GC - Secam 19 BC - Secam 10 GD - Sports 30 BD - Sports 36 RC - Sports 14 GC - Sports 15 BC - Sports 17 Y - Delay (AV) 07 1. 2. 3. SYSTEM L BAND 1 I.F ADJUSTMENT 1. 2. 3. 4. SUB BRIGHTNESS ADJUSTMENT 1. 2. 3. 2. 3. 4. 5. Input a 34.0MHz carrier signal at 100dBuV to Pin 11 [IF output] of the tuner [TU101]. Select ‘system L’ + C00 [channel 00]. Measure the voltage at Pin 17 [IC101]. Adjust RV101 [A Board] to obtain a voltage of 2.5V +/- 0.3V. TUNER AGC ADJUSTMENT Input a Phillips colour pattern. Press ‘TEST’ ‘TEST’ 13 on the Remote Commander. Adjust the ‘Sub-Brightness’ data so that there is barely a difference between the 0 IRE and 10 IRE signal levels. 1. 2. 3. 4. 5. SUB CONTRAST ADJUSTMENT 1. Input a 38.9Mhz carrier signal at 100dBuV to Pin 11 [IF output] of the tuner [TU101]. Measure the voltage at Pin 17 of [IC101]. Adjust L103 [A Board] to obtain a voltage of 2.5V +/- 0.3V. Input a video signal that contains a small 100% white area on a black background Set the picture control to maximum. [‘TT01’] Connect an oscilloscope to Pin 1 of CN504 [A Board]. Enter into the ‘Picture’ service menu. Adjust the ‘R - Drive’ data to obtain the following waveform. Receive a signal of 65dBuV / 75 ohm terminated, via the tuner antenna socket. Connect a voltmeter to JW130 [A Board]. Enter into the ‘Test Menu’. Select the ‘AGC Adjust’ menu item. Adjust the data using the Yellow and Green buttons on the Remote Commander to obtain a voltage of 3.0V +/- 0.2V. A 25" 2.21V +/- 0.01V 29" 2.52V +/- 0.01V RV101 R - out Waveform IC101 17 SUB COLOUR ADJUSTMENT 1. 2. 3. 4. L103 Receive a PAL colour bar signal. Connect an oscilloscope to Pin 3 of CN504 [A Board]. Enter into the ‘Picture’ service menu. Adjust the ‘Sub Colour’ data so that the Cyan, Magenta and Blue colour bars are of equal levels as indicated below. 11 JW130 TUNER Same Level A Board component side B-Out Waveform 21 BELL FILTER ADJUSTMENT (Secam models only). V SIZE Note : Ensure that the TV set has been powered up for at least 1 minute to allow for drift before carrying out the following adjustment. 1. 2. 3. 4. V LIN Input a video SECAM Colour Bar signal via AV1. Connect an oscilloscope to pin 1 of CN504 [R-OUT] on the A board. Enter into the ‘Picture’ menu and select ‘Bell-f0’. Decrease the register of ‘Bell-f0’ until the following waveform change between RED and BLUE is obtained. S CORRECTION V CENTRE H CENTRE H SIZE Before adjustment 5. After adjustment When the correct waveform has been obtained add an additional 7 steps to the register. PIN AMP DEFLECTION SYSTEM ADJUSTMENT 1. 2. PIN PHASE Enter into the ‘Geometry’ service menu. Select and adjust each item in order to obtain the optimum image. CORNER PIN GEOMETRY V ANGLE V centre Adj V size Adj V Lin Adj S Corr Adj H Cent Adj H Size Adj Pin Amp Adj Corner Pin Adj Pin Phase Adj V Bow Adj V Angle Adj Upper V Lin Adj Lower V Lin Adj Left HBLK 07 Right HBLK 07 CD Mode (AV) 01 22 4-2. TEST MODE 2: Is available by pressing ‘TEST’ button twice, OSD ‘TT’ appears. The functions described below are available by pressing the two numbers. To release the Test mode 2, press 0 twice, or switch the TV into stand-by mode, or press the TV button on the remote commander. 00 Cancel Test mode 42 Re-initialise geometry settings [Only when Prog=59] 01 Picture maximum 43 No function 02 Picture minimum 44 No function 03 Volume 35% 45 No function 04 Volume 50% 46 No function 05 Volume 65% 47 No function 06 Volume 80% 48 Set NVM as NON Virgin [Only when Prog=59] 07 Ageing mode On/Off 49 Set NVM as Virgin [Only when Prog=59] 08 Set shipping conditions 50 No function 09 Display TV Status 51 No function 10 No function 52 No function 11 Sub Picture Adjustment 53 No function 12 Sub Colour Adjustment 54 No function 13 Sub Brightness Adjustment 55 No function 14 Text H position Adjustment 56 No function 15 Rotation test 57 No function 16 Picture level 50% 58 No function 17 Audio mute ON 59 No function 18 Disable Blanking 60 No function 19 No function 61 Auto AGC Adjust 20 No function 62 Alternative Dest B Autotuning 21 Destination A 63 Enable/Disable Y/C input 22 Destination L 64 Signal Quality Check for Auto Tune 23 Destination E 65 Signal Quality NOT Checked for Auto Tune 24 Destination U 66 No function 25 Destination D 67 Manual AGC Adjust 26 Destination B 68 -100 No function 27 Destination K 28 Destination R 29 No function 30 No function 31 Auto shutoff Disable/Enable 32 RGB priority Disable/Enable 33 Rotation On/OFF 34 Text language East/West 35 Wide CRT/4:3 CRT 36 VM ON/OFF test 37 No function 38 No function 39 No function 40 No function 41 Re-initialize the NVM [Only when Prog=59] 23 4-3. FE-1 SELF DIAGNOSTIC SOFTWARE The identification of errors within the FE-1 chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with continuous flashing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device number will be displayed through the LED (Series of flashes which must be counted) See Table 1., non fatal errors are reported using this method. Each time the software detects an error it is stored within the NVM. See Table 2. How to enter into Table 2 Table 1 1. LED ERROR COUNT ERROR 2. Turn on the main power switch of the TV set and enter into the ‘Standby Mode’. Press the following sequence of buttons on the Remote Commander. No error 00 Not allowed (may be confused with Sircs response flash!) 01 Protection circuit trip < ANY TIME > 02 Reserved 03 No vertical sync 04 AKB 05 IIC bus clock and/or data lines low at Power ON 06 NVM no IIC bus acknowledge at Power ON 07 Jungle controller no IIC acknowledge at Power ON 08 Tuner no acknowledge at Power ON 09 Error Sound processor no acknowledge at Power ON 10 2 3 4 5 6 7 8 9 10 OFF (ON SCREEN DISPLAY) (DIGIT 5) (VOLUME -) (TV) The following table will be displayed indicating the error count. Table 2 StBy LED ON 5 3. Flash Timing Example : e.g. error number 3 ON i+ ON Times - OFF Note: To clear the error count data press ‘80’ on the Remote commander. 24 5-1 BLOCK DIAGRAMS CN201 A( TUNER, POWER SUPPLY HV OUT AUDIO, MICRO CONTROLLER/TEXT YC JUNGLE VIF DECODER 4 ) R AUDIO TO SPEAKERS 1 L AUDIO S601 IC501 V OUTPUT POWER CN601 J201 VD+ 1 LINE FILTER T601 2 VIDEO AMP Q408, 409 IC101 VIF/SIF DEMODULATOR SCL QSS 12 TU101 DET OUT 16 SWF 101 IF1 SWF 102 1 VIF 2 VIF VP PH601 ISOLATOR SDA 8 0-COIN 0-MSP/ASW 2 4 9 0-RFAGC 9 BUFFER Q012 0-V BLK 17 IC201 AUDIO AMP 10 SDA 2 SIF 1 MONO DGC CHECK 5 L IN/IN 2 7 SCL 0- +B DROP 18 9 STBY 2 3 VOLUME 2 VAR R/SW 14 AGC DEFEAT R IN/IN 3 1 R1 L1 DGC 1 DGC 3 DGC 12 14 EW 5 I-KEY/SCART 9 3 SDAI 6 OSD BLK 35 FBO CP 1 L2 11 4 VCC 4 TVR OUT IC606 POWER TVL OUT RELAY SWITCH Q601 R AUDIO OUT 17 L AUDIO OUT 6 I-KEY/SCART 1/2 10 SCLI AMPLIFIER Q007,008, 009 12 0-SCART 1/2 D605 +B RECT 12 D 3 1 SDAI 19 0-LED 0-WP 7 7 48 I-PROCDES A1 IC004 NVM 6 5 SCLO SCL 34 SCLO 13 S 2 7 D614 RECT 3 + 2 - 1 2 2 D610 RECT 3 1 9VREG 3 TO C BOARD CN701 200V 5 4 4 D 7 3 MON OUT DET V OUT MON OUT 6 B8 1 43 RESET IC608 5V REG MODE A7 1 EXT B IN 26 MON OUT BLUE 1 5 0-ROT/VC D-N-C 42 X-OUT X001 12MHZ 41 X-IN 0-XRAY PROT 52 EXT G IN 27 SWITCH Q011 0-STBY 51 HP 36 HD GREEN H-DRIVE Q535 A15 EXT R IN 28 RED HP PROTECT BLK Y/CVBS IN 41 ABL IN EW TO C BOARD CN706 5 6 13 12 ABL H-OUT Q533 10 D513 +15V RECT 9 7 VD+ VD+ 13 S1 (STEREO DECODER) SCL 1 D514 -15V RECT B15 SDA 2 C IN -15V B20 SIF 5 6 48 XTAL 1 47 XTAL 2 RED GREEN 3 CI IN B OUT 24 BLUE Y1/CVBS IN IK IN 21 34 SCART 1 IN L MAIN OUT R 60 11 TO C BOARD CN703 36 SCART 2 IN R R2 MAIN OUT L 61 12 37 SCART 2 IN L L2 6 4 SCART 1 OUT 48 10 L1 2 G OUT 23 2 TO A BOARD CN101 1 R OUT 22 33 SCART 1 IN R R1 CN504 HD 19 Y/CVBS SCART 1 OUT 47 9 HD XTAI OUT 17 29 MONO IN MONO AUDIO R SCL SDA 12 SIFI VD- VD- 14 4 5 IC1101 STEREO DECODER XTAI IN 18 YV IN J402 AUDIO L 1000V CN1101 3 EW 11 43 TV/C2 IN TO BOARD T511 (FBT) V IN ABL VP 37 G2 (RGB OUT) 8 A20 RV702 H STAT G2 1000V A16 EXT BLK 25 18 STBY +5V TO A BOARD T511 FBT 11 T531 HDT A11 H2 FV D571, Q571,574 IK 14 TVR OUT 15 TVL OUT 16 AUDIO R OUT 17 AUDIO L OUT TVR OUT TVL OUT R AUDIO OUT L AUDIO OUT 25 26 27 G 4 RCV 3 +B HP D632 RECT MODE R G C 2 V TO PICTURE TUBE 4 A8 H B 1 LOW B A19 B OUT Q710 PICTURE TUBE H1 C H1 +9V B DRIVE, BKG Q708 G +200V CN706 T511 FBT MUTE SW Q202 IC609 STANDBY POWER G OUT Q 707 H2 D711 PROTECT 4 +5V HV 2 C CUT OFF 2 6 CN508 5VREG G DRIVE, BKG Q705 R B AUDIO VCC 1 R OUT Q704 CN701 L AUDIO IN 5 G R DRIVE, BKG Q702 H V IC605 1 R PIN OUT Q532 +B 14 DET L OUT SDAO 3 TO A BOARD CN502 T602 L AUDIO IN A3 EXT CVBS 24 VIDEO + J401 35 SDAO STBY + 5V IC003 RESET R IC603 ERROR AMP 5 DET R OUT SDA 8 L 6 45 I-SIRCS RESP 2 A2 30 INT B2 IN SIRCS I MODE 2 11 IC002 REMOTE CONTROL RECEIVER - IC604 31 INT G2 IN B 32 4 CS 5 8 A6 CN703 H- DY+ 16 32 INT R2 IN 0-KEY SCART 12 I-KEY H DY H- DY- HP PROTECT 3 29 INT BLK G 33 I MODE 1 15 2 SCLI H- DY+ 1 11 I-KEY-SCART 14 I-KEY AGC 2 6 7 16 CN001 3 1 T603 SRT 15 NC/IN 2 R 34 FUNCTION SWITCH S001-S006 H- DYH- DY+ V DY IC531 PIN CORRECTION 15 O-KEY/SCART 13 4 +B 1 V- DY- 5 H- DY- 2 IC301 Y/C JUNGLE 16 0-BAND-L 20 0-BAND-L V- DY- TO A BOARD CN504 14 10 MUTE 15 0-BAND-M IC005 SWITCH SCART MATRIX 4 R OUT/OUT 0-SP MUTE 30 SWITCH Q109,110 REF V- DY+ 6 DGC CHECK 12 VAR/L MON OUT L OUT/NC 10 AGC MON SDA 1 OUT 5 2 4 R2 0-VOL BOOST VD- CN602 TO S1 BOARD CN1101 11 14 TU AGC SWITCH Q006 3 V- DY+ RST 6 I-AFT CN603 DY ASSY CN501 IN SCL 4 3 21 BE/DK/I AGC 22 AFC 17 3 CN101 1 5 SYNC SEP Q005, 004 STAND SW RF 3 23 SIF 24 SIF AGC IC001 MICRO CONTROLLER BUFFER Q101 RELAY RY601 HEADPHONES AF OUT 8 SWF 103 7 MAIN RECT D601 28 29 TVR OUT TVL OUT AUDIO R OUT AUDIO L OUT WAVEFORMS A BOARD 1 PAL 1 1.0 Vp-p (H) 4 SECAM 2.6 Vp-p (H) 6 0.5 Vp-p (H) 10 146 Vp-p (V) 14 PAL 2.4 Vp-p (H) WAVEFORMS C BOARD 1 2 102 Vp-p (H) 3 95 Vp-p (H) 4 93 Vp-p (H) 24 Vp-p (H) SECAM 3.0 Vp-p (H) 3 1.3 Vp-p (H) 2.6 Vp-p (H) 8 1.4 Vp-p (H) 12 142 Vp-p (H) 15 SECAM 7 11 15 2 5.0 Vp-p (H) 12 Vp-p (H) 1.1KVp-p (H) PAL 1.0 Vp-p (H) 1.3 Vp-p (H) 5 9 2 2.0 Vp-p (H) 13 56 Vp-p (V) 290 Vp-p (H) 5-4 SEMICONDUCTORS SBX1981-51 CD4052BCM 9 16 2SC688-LK TDA9870 TDA9875P 64 32 8 1 (TOP VIEW) 1 31 ( TOP VIEW ) STR-F6654 LM2940CT-9.0 E TOP209P C 8 5 B SD2539 (SONY) 1 1 4 ( TOP VIEW ) IN GND OUT 5 LM393N TDA2822M TEA2124 TYA7805CTV STV9379 B C 8 7 6 2SA933AS-QRT 2SA933AS-RT 2SC1740S-RT 1 1 2 E 5 3 3 4 2 5 4 7 6 ( TOP VIEW ) LETTER SIDE BF421-AMMO 2SA1091-O NJM4558M-TE2 ST24W08FM6TR 8 5 8 5 1 4 1 4 ( TOP VIEW ) E C B ( TOP VIEW ) E C B PST593C-MMP-4P 4 TDA7495 3 DTC114EK DTC114EKA-T146 DTC144EKA-T-146R 2SA1037K-T-146-QR 2SC2412K-QR 2SC2412K-T-146-R 1 2 1 ( TOP VIEW ) AK04-V1 AU-01Z-V1 DINL20-TA ERB44-06TP1 EG-1Z-V1 EL1Z ERD28-06S ERC06-15S FMN-G12S GP08DPKG23 GP10GPKG23 GP15GPKG23 LSB360HL RB501V-40TE-T7 RG1CLF-B1 RGPO2-17EL-6433 RGP15GPKG23 RGP10GPKG23 RU-4AM-T3 15 C CATHODE SAA5498PS/M1A/074 SAA5498PS/M1A/075 SAA5498PS/M1A/076 TDA9818-V1 24 52 E B 13 ANODE 27 1 12 ( TOP VIEW ) 1 26 ( TOP VIEW ) 45 5-4 SEMICONDUCTORS DAN202K DAN202K-T146 3 1 2 2 3 1 D45B60L-F AK04WS ERC04-6SE MTZJ-T-77-4.7B MTZJ-T-77-5.6B MTZJ-T-77-12B MTZJ-T-77-22B MTZJ-T-77-33A P6KE200AG23 RD5.6ESB2 RN3Z-LF014-302 1SS119-25TD 1SS133T-77 CATHODE ANODE UF4005PKG23 ANODE CATHODE 46 5-5. IC BLOCK DIAGRAMS A BOARD IC201 TDA7495 A BOARD IC501 STV 9379 2 6 2 3 VOLUME 1 FLYBACK GENERATOR 14 30K OP AMP - 1 POWER AMPLIFIER 5 + 7 9 MUTE/STBY PROTECTIONS THERMAL PROTECTION 10 VOLUME 60K 5 12 30K OP AMP 4 3 A BOARD IC101 TDA9817/V1 22 15 TUNER AGC 14 4 6 7 19 18 17 21 20 A BOARD IC606 STR-F6654 VOLTAGE REFERENCE VIF AGC 4 4 AFC DETECTOR 3 1 VIF AMPLIFIER 2 23 VCO TWO FPLL SIF AGC VIDEO DEMODULATOR AND AMPLIFIER O.V.P LATCH DRIVE 16 REG QSS MIXER INTERCARRIER MIXER AM DEMODULATOR SIF AMPLIFIER 24 START 2 T.S.D O.S.C 8 1 Iconst INTERCARRIER MODE SWITCH FM-PLL DEMODULATOR 5 3 12 13 9 5 10 11 A BOARD IC301 CXA2060AS ACC AMP 41 4 MONITOR SW 7 VIDEO SW 9 <VIDEO SEL> <S SEL> 6 COUNT DOWN V SYNC SEP <VSS> <VSS LPF> H SYNC SEP <HSS> 29 VPROT <VNG> VM AMP (OFF YS/YM) DAC SW AKB <IKR> PC BUS DECODER STATUS I/T 21 R/G/B BLK <PON> <RGB ON> 24 23 22 35 34 FILTER ALIGNMENT TRAP PAL 4.43MHz NTSC 3.58MHz SECAM 4.2 - 4.43MHz <TRAP OFF> Y SW Y/C MIX RGB CLAMP CLAMP DC TRAN <DC TRAN> 30 ABL/PEAK LIM <ABL MODE> <ABL VTH> CLAMP RGB 2/2 DPIC SECAM VCO CAL. by 4.43MHz PLL SECAM FM DEMOD ACC DET ATT CHROMA SW LIM AMP (ZAP) ACC AMP 43 2 BELL FILTER 31 CUTOFF CONT <R/G/B CUTOFF> BPF PAL 4.43MHz NTSC 3.58MHz <C BPF> 32 3 COLOR AMP <COLOR> <C DFF> AXIS <COL MATRIX> <DPIC> <AGING> 25 DRIVE AMP <R/G/B DRIVE> DEEMPHASIS 26 42 EYUV CLAMP YUV SW <Y SEL> YUV OUT <C DECOD> 1H DELAY LINE (PAL/SECAM) 27 CLAMP LINE BLK 28 BRIGHT CONT <BRIGHT> SW NTSC PAL,SECAM KILLER <KILLER OFF> 39 38 37 36 GAMMA AMP <GAMMA> CHROMA AMP 15 PAL/NTSC DEMOD COLOR SYSTEM DISCRIMINATOR PAL ID <PAL/NTSC> <XTAL ID> PAL/NTSC COLOR KILLER <KILLER> SECAM ID <SECAM> <XTAL> <COL SYSTEM> <COL LOOP> <ID START> <ID STOP> <HUE> ACO DET. 1 PICTURE AMP <PICTURE> APC <HUE> 5 DYNAMIC COLOR <DY COL> 46 YM SW 47 C VCO 4.433619MHz 3.579545MHz 9.582058MHz Y32 SW 48 YS1 SW <RGB SEL> 45 <FIELD FREQ> <CD MODE> <INTERLACE> AFC <APC GAIN> <FH HIGH> <H CENT> 20 DL PAL/NTSC 300 x 200nS SECAM 300 x 200nS <Y DELAY> LINE COUNTER V TIM GEN <UNDER SCAN> SHARPNESS DL SHARPNESS AMP <SHARPNESS> <SHP FO> <PREOVER> VD SAW FUNC <VON> <VSIZE> <V POSITION> WIDE SAW FUNC <ASPECT> <SCROLL> <UPPER VLIN> <LOWER VLIN> <V ZOOM> <V UNDER SCAN> V SAW GEN (50/50) VTIM EW PARABOLA FUNC <H SIZE> <PIN AMP> <CORNER PIN> <FIELD ID> H SAW GEN H OSC <ZAP> PHASE DET <H POSITION> <AFC BOW> <AFC ANGLE> HPROT <HNG> H TIM GEN <H BLK> <LEFT HBLK> <RIGHT HBLK> 17 5 18 47 14 <S CORRECTION> <V LINEARITY> <EHT COMP> HD GEN <HD W> 19 IREF 10 REG 12 16 33 <TRAPEZIUM> <EW DC> 13 11 SECTION 6 EXPLODED VIEWS NOTE : • • Items with no part number and no description are not stocked because they are seldom required for routine service. The construction parts of an assembled part are indicated with a collation number in the remarks column. • Items marked “ * “ are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 6-1. KV-21C5 CHASSIS 10 10 11 10 7 8 6 5 9 4 1 2 REF. NO. 1 2 3 4 5 6 £ £ £ PART.NO DESCRIPTION 1-571-433-21 *4-202-531-01 1-765-286-11 *4-204-143-01 *A-1632-798-A *A-1632-797-A *A-1632-796-A *A-1632-799-A *A-1632-800-A 1-453-279-11 SWITCH, PUSH (AC POWER) AC CORD LOCK (SC) CORD, POWER BRACKET, MAIN A BOARD, COMPLETE (KV-21C5B) A BOARD, COMPLETE (KV-21C5D) A BOARD, COMPLETE (KV-21C5E) A BOARD, COMPLETE (KV-21C5K) A BOARD, COMPLETE (KV-21C5R) TRANSFORMER ASSY, FLYBACK NX-1747/U2B 3 REMARK REF. NO. PART.NO 7 1-693-418-11 TUNER (TELE9-001A) (KV-21C5B) 8-598-432-00 TUNER (BTP-AC411) (KV-21C5D/21C5E/ 21C5K/21C5R) *A-1652-056-A S1 BOARD, COMPLETE (KV-21C5B) *A-1652-053-A S1 BOARD, COMPLETE (KV-21C5D/21C5R) *A-1652-052-A S1 BOARD, COMPLETE (KV-21C5E/21C5K) 4-204-147-01 COVER, REAR 7-685-663-71 SCREW +BVTP 4X16 TYPE2 IT-3 7-685-663-79 SCREW +BVTP 4X16 TYPE2 IT-3 8 9 10 11 48 DESCRIPTION REMARK 6-2. KV-21C5 PICTURE TUBE 65 72 73 69 68 66 74 67 75 76 70 71 62 51 63 64 61 59 60 70 58 52 57 71 56 53 54 55 REF. NO. PART.NO 51 52 53 54 55 56 57 58 59 60 61 62 £ £ £ X-4200-410-1 X-4200-411-1 4-047-464-01 4-204-359-01 4-204-359-11 3-703-035-11 4-204-360-01 4-204-146-01 7-685-648-79 4-203-128-01 8-738-787-71 8-738-784-05 8-451-295-45 *A-1638-118-A DESCRIPTION REMARK REF. NO. 63 64 65 66 67 68 69 70 71 72 73 74 75 76 BEZNET ASSY (KV-21C5B/21C5E/21C5K) 52-57 BEZNET ASSY (KV-21C5D/21C5R) CATCHER, PUSH DOOR (PAINTED)(KV-21C5B/21C5E/21C5K) DOOR (PAINTED)(KV-21C5D/21C5R) SHAFT, LID BUTTON, POWER GUIDE, LIGHT SCREW +BVTP 3X16 TYPE2 IT-3 SHEET BLOTTING ITC 60-61 PICTURE TUBE (SD-169)(A51JXH161X) DEFLECTION YOKE (Y21PFA2BA) C BOARD, COMPLETE 49 £ £ PART.NO DESCRIPTION REMARK 4-369-318-21 1-411-922-11 4-386-622-11 3-704-495-01 1-452-277-00 1-540-006-22 4-365-808-01 7-685-663-71 1-505-924-11 4-308-870-00 1-452-032-00 1-452-094-00 X-4387-214-1 3-701-007-00 SPRING, TENSION COIL, DEGAUSSING BAND, DGC SPACER, DY MAGNET, BMC CAP ASSY, HIGH-VOLTAGE SCREW (5), TAPPING SCREW +BVTP 4X16 TYPE2 IT-3 SPEAKER (15X6.5CM) CLIP, LEAD WIRE MAGNETIC, ROTATABLE DISK; 15MM Ø MAGNETIC, DISK; 10MM Ø PERMALLOY ASSY, CORRECTION BAND, BINDING 6-3. KV-21X5 CHASSIS 10 10 12 9 11 7 10 8 6 1 5 10 4 2 9 3 KV-21X5L/21X5U only REF. NO. PART.NO 1 2 3 4 5 6 £ £ £ *A-1632-804-A *A-1632-803-A *A-1632-802-A *A-1632-801-A *A-1632-807-A *A-1632-806-A *A-1632-808-A *A-1632-805-A 1-571-433-21 1-765-286-11 *4-202-531-01 *4-204-143-01 1-453-279-11 DESCRIPTION REMARK REF. NO. A BOARD, COMPLETE (KV-21X5A) A BOARD, COMPLETE (KV-21X5B) A BOARD, COMPLETE (KV-21X5D) A BOARD, COMPLETE (KV-21X5E) A BOARD, COMPLETE (KV-21X5K) A BOARD, COMPLETE (KV-21X5L) A BOARD, COMPLETE (KV-21X5R) A BOARD, COMPLETE (KV-21X5U) SWITCH, PUSH (AC POWER) CORD, POWER AC CORD LOCK (SC) BRACKET, MAIN TRANSFORMER ASSY, FLYBACK NX-1747/U2B 7 8 9 10 11 12 50 PART.NO DESCRIPTION REMARK 1-693-418-11 TUNER (TELE9-001A) (KV-21X5B) 8-598-432-00 TUNER (BTP-AC411) (KV-21X5A/21X5D/21X5E/ 21X5K/21X5L/21X5R) 8-598-464-01 TUNER (BTP-AU611) (KV-21X5U) *A-1652-053-A S1 BOARD, COMPLETE (KV-21X5A/21X5D/21X5R) *A-1652-056-A S1 BOARD, COMPLETE (KV-21X5B) *A-1652-052-A S1 BOARD, COMPLETE (KV-21X5E/21X5K/21X5L/ 21X5U) 4-505-924-01 SPEAKER (15X6.5CM) 7-685-663-71 SCREW +BVTP 4X16 TYPE2 IT-3 4-204-167-01 COVER, REAR 7-685-663-79 SCREW +BVTP 4X16 TYPE2 IT-3 6-4. KV-21X5 PICTURE TUBE 65 70 71 69 72 68 66 67 73 74 62 51 63 64 61 60 59 58 52 57 53 56 54 55 REF. NO. PART.NO 51 X-4200-402-2 BEZNET ASSY (KV-21X5A/21X5D/21X5R) 52-57 X-4200-402-1 BEZNET ASSY (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) 4-047-464-01 CATCHER, PUSH 4-204-170-11 DOOR (KV-21X5A/21X5D/21X5R) 4-204-170-01 DOOR (KV-21X5B/21X5E/21X5K/21X5L/21X5U) 4-204-171-01 BUTTON, POWER 3-202-964-01 SPRING 4-204-172-01 GUIDE, LIGHT 7-685-648-79 SCREW +BVTP 3X16 TYPE2 IT-3 4-203-128-01 SHEET BLOTTING 8-738-787-71 ITC 60-61 8-738-784-05 PICTURE TUBE (SD-169)(A51JXH61X) 8-451-295-45 DEFLECTION YOKE (Y21PFA2BA) 52 53 54 55 56 57 58 59 60 61 £ £ £ DESCRIPTION REMARK REF. NO. 62 63 64 65 66 67 68 69 70 71 72 73 74 51 PART.NO £ £ *A-1638-118-A 4-369-318-21 1-411-922-11 4-386-622-11 3-704-495-01 1-452-277-00 1-540-006-22 4-365-808-01 4-308-870-00 1-452-094-00 1-452-032-00 X-4387-214-1 3-701-007-00 DESCRIPTION REMARK C BOARD, COMPLETE SPRING, TENSION COIL, DEGAUSSING BAND, DGC SPACER, DY MAGNET, BMC CAP ASSY, HIGH-VOLTAGE SCREW (5), TAPPING CLIP, LEAD WIRE MAGNETIC, ROTATABLE DISK; 15MM Ø MAGNETIC, DISK; 10MM Ø PERMALLOY ASSY, CORRECTION BAND, BINDING SECTION 7 ELECTRICAL PARTS LIST • Items marked “ * “ are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. All variable and adjustable resistors have characteristic curve B, unless otherwise noted. RESISTORS All resistors are in ohms. F : nonflammable. When indicating parts by reference number, please include the board name. • CAPACITORS MF : mF, PF : mmF COILS MMH : mH , uH • • • A REF. NO. PART.NO DESCRIPTION *A-1632-798-A A BOARD, COMPLETE ***************** *A-1632-797-A A BOARD, COMPLETE ***************** *A-1632-796-A A BOARD, COMPLETE ***************** *A-1632-799-A A BOARD, COMPLETE ***************** *A-1632-800-A A BOARD, COMPLETE ***************** *A-1632-804-A A BOARD, COMPLETE ***************** *A-1632-803-A A BOARD, COMPLETE ***************** *A-1632-802-A A BOARD, COMPLETE ***************** *A-1632-801-A A BOARD, COMPLETE ***************** *A-1632-807-A A BOARD, COMPLETE ***************** *A-1632-806-A A BOARD, COMPLETE ***************** *A-1632-808-A A BOARD, COMPLETE ***************** *A-1632-805-A A BOARD, COMPLETE ***************** REMARK REF. NO. (KV-21C5B) (KV-21C5D) (KV-21C5E) (KV-21C5K) (KV-21C5R) (KV-21X5A) (KV-21X5B) (KV-21X5D) (KV-21X5E) (KV-21X5K) (KV-21X5L) (KV-21X5R) (KV-21X5U) 4-382-854-11 SCREW (M3X10), P, SW (+) < CAPACITOR > C004 C005 C006 C007 C008 1-163-038-00 1-163-105-00 1-163-105-00 1-126-935-11 1-126-964-11 CERAMIC CHIP 0.1MF CERAMIC CHIP 33PF CERAMIC CHIP 33PF ELECT 470MF ELECT 10MF 5% 5% 20% 20% 25V 50V 50V 16V 50V C009 C011 C012 C013 C016 1-126-965-11 1-126-965-11 1-126-959-11 1-163-017-00 1-164-004-11 ELECT 22MF ELECT 22MF ELECT 0.47MF CERAMIC CHIP 0.0047MF CERAMIC CHIP 0.1MF 20% 20% 20% 10% 10% 50V 50V 50V 50V 25V PART.NO DESCRIPTION C018 C019 C022 C024 C025 1-164-232-11 1-163-038-00 1-126-935-11 1-104-665-11 1-130-495-00 CERAMIC CHIP 0.01MF CERAMIC CHIP 0.1MF ELECT 470MF ELECT 100MF FILM 0.1MF 10% 20% 20% 5% 50V 25V 16V 25V 50V C029 C030 C031 C032 C033 1-163-077-00 1-104-665-11 1-163-017-00 1-163-077-00 1-164-004-11 CERAMIC ELECT CERAMIC CERAMIC CERAMIC CHIP 0.1MF 100MF CHIP 0.0047MF CHIP 0.1MF CHIP 0.1MF 10% 20% 10% 10% 10% 25V 25V 50V 25V 25V C035 C036 C037 C038 C039 1-164-232-11 1-163-017-00 1-163-017-00 1-126-964-11 1-163-017-00 CERAMIC CERAMIC CERAMIC ELECT CERAMIC CHIP 0.01MF CHIP 0.0047MF CHIP 0.0047MF 10MF CHIP 0.0047MF 10% 10% 10% 20% 10% 50V 50V 50V 50V 50V C040 C041 C042 C043 C100 1-163-189-00 1-163-205-00 1-126-933-11 1-126-935-11 1-163-038-00 CERAMIC CHIP 220PF CERAMIC CHIP 0.001MF ELECT 100MF ELECT 470MF CERAMIC CHIP 0.1MF 5% 10% 20% 20% C103 C105 C108 C109 C110 1-104-665-11 1-126-965-11 1-163-465-11 1-164-004-11 1-163-038-00 ELECT 100MF ELECT 22MF CERAMIC CHIP 9PF CERAMIC CHIP 0.1MF CERAMIC CHIP 0.1MF 20% 20% 0.25PF 10% C111 1-163-059-00 CERAMIC CHIP 0.01MF 1-216-296-00 SHORT C112 C115 C116 C117 52 REMARK 1-163-031-11 1-164-489-11 1-126-961-11 1-126-961-11 0 50V 50V 16V 16V 25V (KV-21C5B/21X5B) 25V 50V 50V 25V 25V 50V (KV-21C5B/21X5B) (KV-21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5D/21X5E/21X5K/ 21X5L/21X5R/21X5U) CERAMIC CHIP 0.01MF CERAMIC CHIP 0.22MF ELECT 2.2MF ELECT 2.2MF 10% 20% 20% 50V 16V 50V 50V The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO A DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK 25V 50V 50V (KV-21C5B/21X5B) 20% 16V C319 C321 C322 C328 C329 1-126-964-11 1-126-963-11 1-164-004-11 1-104-664-11 1-164-232-11 ELECT 10MF ELECT 4.7MF CERAMIC CHIP 0.1MF ELECT 47MF CERAMIC CHIP 0.01MF 20% 20% 10% 20% 10% 50V 50V 25V 25V 50V 16V (KV-21C5B/21X5B) 20% 25V 10% 25V 50V C330 C331 C332 C333 C334 1-163-038-00 1-164-232-11 1-164-232-11 1-126-960-11 1-163-017-00 CERAMIC CERAMIC CERAMIC ELECT CERAMIC CHIP 0.1MF CHIP 0.01MF CHIP 0.01MF 1MF CHIP 0.0047MF 10% 10% 20% 10% 25V 50V 50V 50V 50V 50V 50V 20% 25V 10% 50V (KV-21C5B/21X5B) C335 C336 C337 C338 C339 1-164-232-11 1-164-232-11 1-164-232-11 1-126-967-11 1-163-038-00 CERAMIC CERAMIC CERAMIC ELECT CERAMIC CHIP 0.01MF CHIP 0.01MF CHIP 0.01MF 47MF CHIP 0.1MF 10% 10% 10% 20% 50V 50V 50V 50V 25V 50V 50V 25V 25V 25V C350 C351 C401 C402 C403 1-163-017-00 1-163-017-00 1-163-141-00 1-126-960-11 1-163-017-00 CERAMIC CERAMIC CERAMIC ELECT CERAMIC CHIP 0.0047MF CHIP 0.0047MF CHIP 0.001MF 1MF CHIP 0.0047MF 10% 10% 5% 20% 10% 50V 50V 50V 50V 50V 20% 20% 20% 50V 50V 50V 50V 50V C405 C406 C407 C408 C410 1-163-141-00 1-126-960-11 1-126-964-11 1-126-964-11 1-126-964-11 CERAMIC CHIP 0.001MF ELECT 1MF ELECT 10MF ELECT 10MF ELECT 10MF 5% 20% 20% 20% 20% 50V 50V 50V 50V 50V 10% 10% 10% 10% 10% 50V 50V 50V 50V 25V C413 C414 C415 C416 C417 1-163-141-00 1-126-960-11 1-163-017-00 1-126-964-11 1-163-141-00 CERAMIC CHIP 0.001MF ELECT 1MF CERAMIC CHIP 0.0047MF ELECT 10MF CERAMIC CHIP 0.001MF 5% 20% 10% 20% 5% 50V 50V 50V 50V 50V 50V (KV-21C5B/21X5B) 10% 50V (KV-21C5B/21X5B) 25V C418 C422 C423 C426 C427 1-126-960-11 1-163-017-00 1-126-964-11 1-163-009-11 1-535-303-00 ELECT CERAMIC CHIP ELECT CERAMIC CHIP LEAD, JUMPER 1MF 0.0047MF 10MF 0.001MF (5.0MM) 20% 10% 20% 10% 50V 50V 50V 50V ELECT 47MF CERAMIC 0.01MF ELECT 10MF CERAMIC CHIP 470PF CERAMIC CHIP 0.01MF 20% 16V 50V 50V 50V 50V C428 C429 C430 C432 C433 1-163-009-11 1-535-303-00 1-104-664-11 1-163-141-00 1-163-141-00 CERAMIC CHIP LEAD, JUMPER ELECT CERAMIC CHIP CERAMIC CHIP 0.001MF (5.0MM) 47MF 0.001MF 0.001MF 10% 50V 20% 5% 5% 25V 50V 50V CERAMIC ELECT CERAMIC CERAMIC CERAMIC 10% 20% 5% 5% 25V 50V 50V 50V 25V C434 C435 C436 C437 C438 1-126-935-11 1-163-017-00 1-163-055-00 1-124-903-11 1-124-903-11 ELECT 470MF CERAMIC CHIP 0.0047MF CERAMIC CHIP 0.0047MF ELECT 1MF ELECT 1MF 20% 10% 10% 20% 20% 16V 50V 50V 50V 50V 5% 5% 50V 50V C443 C444 1-163-017-00 CERAMIC CHIP 0.0047MF 1-163-017-00 CERAMIC CHIP 0.0047MF 10% 10% 50V 50V C118 C120 C121 1-163-038-00 CERAMIC CHIP 0.1MF 1-163-031-11 CERAMIC CHIP 0.01MF 1-163-031-11 CERAMIC CHIP 0.01MF C129 1-104-660-91 ELECT C133 1-162-638-11 CERAMIC CHIP 1MF C134 C135 C138 1-128-551-11 ELECT 22MF 1-164-004-11 CERAMIC CHIP 0.1MF 1-165-319-11 CERAMIC CHIP 0.1MF C139 C140 C143 C144 1-163-031-11 1-163-031-11 1-104-664-11 1-163-017-00 CERAMIC CHIP 0.01MF CERAMIC CHIP 0.01MF ELECT 47MF CERAMIC CHIP 0.0047MF C146 C160 C201 C203 C204 1-163-031-11 1-163-017-00 1-104-666-11 1-126-942-61 1-126-942-61 CERAMIC CHIP 0.01MF CERAMIC CHIP 0.0047MF ELECT 220MF ELECT 1000MF ELECT 1000MF C205 C206 C207 C208 C209 1-163-033-91 1-126-960-11 1-126-972-11 1-126-960-11 1-163-033-91 CERAMIC CHIP 0.022MF ELECT 1MF ELECT 1000MF ELECT 1MF CERAMIC CHIP 0.022MF C210 C211 C213 C214 C215 1-163-009-11 1-163-009-11 1-163-019-00 1-163-019-00 1-164-004-11 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC C218 1-102-074-00 CERAMIC CHIP 0.001MF C219 1-102-074-00 CERAMIC C301 1-163-038-00 CERAMIC CHIP 0.1MF C302 C303 C304 C305 C307 1-126-967-11 1-101-004-00 1-126-964-11 1-163-005-11 1-164-232-11 C308 C309 C312 C313 C314 1-164-004-11 1-126-963-11 1-163-099-00 1-163-099-00 1-163-038-00 C316 C317 1-163-259-91 CERAMIC CHIP 220PF 1-136-169-00 FILM 0.22MF 47MF CHIP CHIP CHIP CHIP CHIP 0.001MF 0.001MF 0.0068MF 0.0068MF 0.1MF 0.001MF CHIP 0.1MF 4.7MF CHIP 18PF CHIP 18PF CHIP 0.1MF 10% 20% 20% 20% 5% 20% 10% 10% 53 The components identified by shading and marked are critical for safety Replace only with the part number specified. A REF. NO. PART.NO DESCRIPTION REMARK C445 C501 C502 C503 C504 1-163-017-00 1-126-968-11 1-163-038-00 1-126-968-11 1-106-220-00 CERAMIC CHIP 0.0047MF ELECT 100MF CERAMIC CHIP 0.1MF ELECT 100MF MYLAR 0.1MF 10% 20% 20% 10% 50V 50V 25V 50V 100V C505 C506 C507 C508 C509 1-136-173-00 1-164-232-11 1-126-933-11 1-126-960-11 1-107-364-11 FILM 0.47MF CERAMIC CHIP 0.01MF ELECT 100MF ELECT 1MF MYLAR 0.01MF 5% 10% 20% 20% 10% 50V 50V 16V 50V 200V C510 C513 C515 C517 C518 1-163-005-11 1-107-662-11 1-104-666-11 1-104-666-11 1-106-375-12 CERAMIC CHIP 470PF ELECT 22MF ELECT 220MF ELECT 220MF MYLAR 0.022MF 10% 20% 20% 20% 99% 50V 250V 25V 25V 200V C519 C520 C531 C535 C536 1-163-275-11 1-163-038-00 1-126-964-11 1-163-251-11 1-107-804-11 CERAMIC CHIP 0.001MF CERAMIC CHIP 0.1MF ELECT 10MF CERAMIC CHIP 100PF FILM 0.68MF 5% 50V 25V 50V 50V 200V C537 C538 C539 C541 C542 1-137-417-11 1-165-319-11 1-107-650-11 1-106-383-00 1-162-116-00 MYLAR 0.0047MF CERAMIC CHIP 0.1MF ELECT 3.3MF MYLAR 0.047MF CERAMIC 680PF 10% 20% 10% 10% 200V 50V 250V 200V 2KV C543 C545 C546 C547 C548 1-162-134-11 1-126-960-11 1-129-746-00 1-115-522-11 1-162-134-11 CERAMIC ELECT FILM FILM CERAMIC 470PF 1MF 0.039MF 1MF 470PF 10% 20% 5% 5% 10% 2KV 50V 400V 200V 2KV C550 C552 C553 C555 C571 1-107-638-11 1-102-212-00 1-137-417-11 1-117-644-11 1-123-024-21 ELECT CERAMIC MYLAR FILM ELECT 33MF 820PF 0.0047MF 10000PF 33MF 20% 10% 10% 3% 160V 500V 200V 1.2KV 160V C572 C580 C582 C584 C601 1-128-526-11 1-164-232-11 1-163-017-00 1-126-963-11 £ 1-107-563-11 ELECT 100MF CERAMIC CHIP 0.01MF CERAMIC CHIP 0.0047MF ELECT 4.7MF FILM 0.1MF 20% 10% 10% 20% 20% 25V 50V 50V 50V 300V C602 C603 C604 C605 £ 1-107-563-11 FILM £ 1-117-700-51 CERAMIC £ 1-117-700-51 CERAMIC 1-104-652-11 ELECT 20% 99% 99% 20% 300V 250V 250V 10V 0.1MF 0.0022MF 0.0022MF 470MF 20% 5% 5% REF. NO. C606 PART.NO DESCRIPTION 1-125-318-00 ELECT(BLOCK) 220MF 1-117-751-11 ELECT(BLOCK) 220MF CERAMIC ELECT ELECT CERAMIC CERAMIC 20% 400V (KV-21C5B/21C5D/21C5E) (KV-21X5A/21X5B/21X5D/ 21X5E/21X5L/21X5U) 20% 450V (KV-21C5K/21C5R) (KV-21X5K/21X5R) C607 C609 C610 C611 C612 1-161-754-00 1-107-915-51 1-104-665-11 1-165-127-11 £ 1-161-964-51 C613 C614 C615 C618 C621 £ 1-161-964-51 CERAMIC £ 1-161-964-51 CERAMIC 1-130-202-00 FILM 1-107-890-11 ELECT 1-163-005-11 CERAMIC CHIP 0.0047MF 0.0047MF 0.022MF 2200MF 470PF 10% 20% 10% 250V 250V 400V 25V 50V C622 C624 C625 C628 C629 £ 1-161-964-51 1-104-665-11 1-104-665-11 1-124-347-00 1-136-189-00 CERAMIC ELECT ELECT ELECT FILM 0.0047MF 100MF 100MF 100MF 0.1MF 20% 20% 20% 10% 250V 25V 25V 160V 250V C630 C633 C635 C638 1-165-127-11 1-104-332-11 1-107-675-11 1-107-670-11 CERAMIC CERAMIC ELECT ELECT 470PF 10% 500V 470PF 10% 2KV 1MF 20% 160V 10MF 20% 400V (KV-21C5B/21C5D/21C5E/21C5K) (KV-21X5A/21X5B/21X5D/21X5E/ 21X5K/21X5L/21X5U) 10MF 20% 450V (KV-21C5R/21X5R) 1-107-679-91 ELECT C639 C640 C641 C642 1-104-665-11 1-104-664-11 1-104-665-11 1-104-665-11 ELECT ELECT ELECT ELECT 0.001MF 2200MF 100MF 470PF 0.0047MF REMARK 100MF 47MF 100MF 100MF 10% 20% 20% 10% 20% 20% 20% 20% 2KV 50V 25V 500V 250V 25V 25V 25V 25V < FILTER > 54 CF101 CF105 1-404-134-00 TRAP, CERAMIC (5.5MHZ) 1-760-154-11 TRAP, CERAMIC (KV-21C5B/21X5B/21X5L/21X5U) SWF101 1-579-273-11 FILTER, SURFACE WAVE (KV-21C5B/21X5B/21X5L/21X5U) 1-767-874-11 FILTER, SURFACE WAVE (KV-21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5D/21X5E/21X5K/ 21X5R) SWF102 SWF103 1-767-873-11 FILTER, SURFACE WAVE 1-767-083-11 FILTER, SURFACE WAVE (KV-21C5B/21X5B) The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION A REMARK REF. NO. < CONNECTOR > CN001 CN101 CN201 CN501 CN502 *1-564-508-11 1-766-922-11 *1-564-507-11 *1-580-798-11 *1-564-508-51 PLUG, CONNECTOR 6P CONNECTOR, BOARD TO BOARD 18P PLUG, CONNECTOR 4P CONNECTOR PIN (DY) PIN, CONNECTOR 5P CN504 CN506 CN601 CN602 £ *1-564-509-11 1-695-915-11 *1-580-843-11 1-508-765-00 PLUG, CONNECTOR 6P TAB (CONTACT) PIN, CONNECTOR (POWER) PIN, CONNECTOR (5MM PITCH) 3P CN603 £ 1-508-786-00 PIN, CONNECTOR (5MM PITCH) 2P < DIODE > D001 D002 D003 D004 D005 8-719-109-89 8-719-109-89 8-719-057-56 8-719-109-89 8-719-109-89 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 RD5.6ESB2 LS5360HL RD5.6ESB2 RD5.6ESB2 D007 D008 D009 D010 D011 8-719-109-89 8-719-991-33 8-719-109-89 8-719-109-89 8-719-109-89 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 1SS133T-77 RD5.6ESB2 RD5.6ESB2 RD5.6ESB2 D012 D014 D015 D017 D018 8-719-914-43 8-719-058-24 8-719-914-43 8-719-109-89 8-719-991-33 DIODE DIODE DIODE DIODE DIODE DAN202K RB501V-40TE-17 DAN202K RD5.6ESB2 1SS133T-77 D023 D101 D104 D201 D202 8-719-109-89 8-719-982-24 8-719-914-43 8-719-929-15 8-719-914-43 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 MTZJ-33A DAN202K HZS9.1NB2 DAN202K D204 D205 D206 D306 D307 8-719-109-89 8-719-109-89 8-719-109-89 8-719-109-89 8-719-109-89 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 RD5.6ESB2 RD5.6ESB2 RD5.6ESB2 RD5.6ESB2 D308 D320 D402 D405 D406 8-719-109-72 8-719-929-15 8-719-109-89 8-719-109-89 8-719-109-97 DIODE DIODE DIODE DIODE DIODE RD3.9ES-B2 HZS9.1NB2 RD5.6ESB2 RD5.6ESB2 RD6.8ESB2 D407 D408 8-719-109-97 DIODE RD6.8ESB2 8-719-929-15 DIODE HZS9.1NB2 (KV-21C5B/21X5B) PART.NO DESCRIPTION D410 D414 D415 D417 D418 8-719-109-89 8-719-109-97 8-719-929-15 8-719-929-15 8-719-929-15 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 RD6.8ESB2 HZS9.1NB2 HZS9.1NB2 HZS9.1NB2 D419 D420 D422 D423 D424 8-719-929-15 8-719-109-97 8-719-109-97 8-719-109-97 8-719-929-15 DIODE DIODE DIODE DIODE DIODE HZS9.1NB2 RD6.8ES-B2 RD6.8ES-B2 RD6.8ES-B2 HZS9.1NB2 D427 D430 D501 D502 D512 8-719-109-97 8-719-109-97 8-719-908-03 8-719-924-13 8-719-908-03 DIODE DIODE DIODE DIODE DIODE RD6.8ES-B2 RD6.8ES-B2 GP08D MTZJ-T-77-22B GP08D D513 D514 D534 D536 D539 8-719-908-03 8-719-908-03 8-719-908-03 8-719-945-80 8-719-928-08 DIODE DIODE DIODE DIODE DIODE GP08D GP08D GP08D ERC06-15S ERD28-08S D541 D571 D573 D601 D602 1-535-303-00 8-719-911-19 8-719-921-40 8-719-510-53 8-719-046-74 LEAD, DIODE DIODE DIODE DIODE JUMPER (5.0MM) 1SS119-25 MTZJ-4.7C D4SB60L AU-01Z-V1 D603 D605 D608 D610 D613 8-719-046-74 8-719-312-10 8-719-067-88 8-719-067-78 8-719-911-19 DIODE DIODE DIODE DIODE DIODE AU-01Z-V1 RU4AM-T3 RG1CLF-B1 RN3Z-LF014-302 1SS119-25 D614 D619 D621 D626 D627 8-719-058-38 8-719-043-76 8-719-068-00 8-719-068-00 8-719-510-64 DIODE DIODE DIODE DIODE DIODE FMN-G12S AK04VO ERC04-06SE ERC04-06SE S2LA20F D628 D629 D631 D632 D633 8-719-059-23 8-719-979-64 8-719-110-31 8-719-510-64 8-719-109-89 DIODE DIODE DIODE DIODE DIODE P6KE200AG23 UF4005PKG23 RD12ES-B2 S2LA20F RD5.6ESB2 REMARK < FUSE > F601 55 £ 1-576-232-21 FUSE (H.B.C.) 5AMP £ *1-533-725-11 HOLDER, FUSE (F601) 250V The components identified by shading and marked are critical for safety Replace only with the part number specified. A REF. NO. PART.NO DESCRIPTION REMARK REF. NO. FB001 FB002 FB601 FB602 FB605 1-412-911-11 1-412-911-11 1-412-911-11 1-412-911-11 1-410-397-21 FERRITE FERRITE FERRITE FERRITE FERRITE FB608 FB609 FB610 FB611 FB612 1-412-911-11 1-410-396-41 1-410-397-21 1-410-397-21 1-535-303-00 FERRITE 0UH FERRITE 0.45UH FERRITE 1.1UH FERRITE 1.1UH LEAD, JUMPER (5.0MM) 0UH 0UH 0UH 0UH 1.1UH < IC > 8-759-542-66 IC SAA5497PS/M1A/074 8-759-466-49 8-759-542-68 IC SAA5497PS/M1A/076 8-759-542-56 IC SAA5497PS/M1A/075 (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) (KV-21C5D/21X5A/21X5D) (KV-21C5R/21X5R) IC002 IC003 IC004 IC005 IC101 8-742-014-11 8-759-468-56 8-759-432-33 8-759-516-41 8-759-466-47 8-759-466-79 HYB IC SBX1981-51 IC MN1381-T(TA) IC ST24W08FM6TR IC CD4052BCM IC TDA9818/V1 (KV-21C5B/21X5B) IC TDA9817/V1 (KV-21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5D/21X5E/21X5K/ 21X5L/21X5R/21X5U) IC201 IC301 IC501 IC531 IC603 8-759-442-74 8-752-088-38 8-759-192-71 8-759-450-95 8-749-920-61 IC IC IC IC IC TDA7495 CXA2060BS STV9379 LM393N SE-135N IC604 IC605 IC606 IC608 IC609 8-759-524-82 8-759-267-25 8-749-013-75 8-759-524-82 8-759-468-89 IC IC IC IC IC TYA7805CTV LM2940CT-9.0 STR-F6654 TYA7805CTV TOP209P PH601 £ 8-749-010-64 PHOTO COUPLER PC123F2 < SOCKET > 1-764-606-11 1-766-296-11 1-784-967-11 1-784-632-11 REMARK L001 L102 L103 L104 L106 1-408-603-31 1-408-600-31 1-403-686-11 1-535-303-00 1-408-611-31 INDUCTOR 10UH INDUCTOR 4.7UH COIL LEAD, JUMPER (5.0MM) INDUCTOR 47UH L108 L109 L201 L202 L203 1-410-985-11 1-410-789-11 1-408-591-11 1-408-591-11 1-406-979-11 INDUCTOR CHIP 0.22UH INDUCTOR 0.47UH INDUCTOR 1UH INDUCTOR 1UH INDUCTOR 0UH L204 L205 L301 L302 L303 1-408-603-31 1-408-603-31 1-216-295-00 1-408-611-31 1-408-609-41 INDUCTOR INDUCTOR SHORT 0 INDUCTOR INDUCTOR L401 L402 L403 L404 L405 1-408-611-31 1-408-611-31 1-535-303-00 1-535-303-00 1-216-295-00 INDUCTOR 47UH INDUCTOR 47UH LEAD, JUMPER (5.0MM) LEAD, JUMPER (5.0MM) SHORT 0 L406 L501 L502 L503 L532 1-216-295-00 1-408-611-31 1-412-531-31 1-412-521-31 1-412-553-11 SHORT 0 INDUCTOR INDUCTOR INDUCTOR INDUCTOR L535 L537 L538 L540 L571 1-459-111-00 1-459-652-12 1-459-390-00 1-535-303-00 1-412-533-21 INDUCTOR 0UH HLC INDUCTOR 0UH LEAD, JUMPER (5.0MM) INDUCTOR 47UH L602 1-414-187-11 INDUCTOR (KV-21C5B/21X5B) (KV-21C5B/21X5B) 10UH 10UH 47UH 33UH 47UH 33UH 4.7UH 3.3MMH 47UH < TRANSISTOR > < PHOTO COUPLER > J201 J401 J402 J404 DESCRIPTION < COIL > < FERRITE BEAD > IC001 PART.NO JACK CONNECTOR, DUAL SCART JACK BLOCK, PIN 3P JACK, PIN 2P 56 Q004 Q005 Q006 Q007 Q008 8-729-216-22 1-801-806-11 1-801-806-11 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SA1162-G DTC144EKA DTC144EKA 2SD601A-Q 2SD601A-Q Q009 Q010 Q011 Q012 Q014 8-729-422-27 8-729-422-27 1-801-806-11 8-729-422-27 8-729-422-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD601A-Q 2SD601A-Q DTC144EKA 2SD601A-Q 2SD601A-Q Q101 Q107 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-022-54 TRANSISTOR 2SC3779C,D-AA (KV-21C5B/21X5B) The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO A DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R023 R029 R032 R034 R035 1-216-295-00 1-216-073-00 1-216-089-00 1-216-065-00 1-216-049-00 SHORT RES,CHIP RES,CHIP RES,CHIP RES,CHIP 0 10K 47K 4.7K 1K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 2SD601A-Q 2SD601A-Q 2SK2251-01-F19 S2055N-16E305A 2SC2688-LK R036 R038 R039 R046 R047 1-216-065-00 1-216-073-00 1-216-089-00 1-216-085-00 1-216-067-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 4.7K 10K 47K 33K 5.6K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 2SA1330-O6 2SD601A-Q DTC144EKA 2SD601A-Q 2SA1162-G R048 R049 R050 R051 R053 1-216-081-00 1-216-057-00 1-216-041-00 1-216-049-00 1-216-065-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 22K 2.2K 470 1K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R054 R055 R056 R057 R058 1-216-041-00 1-216-081-00 1-216-105-00 1-216-075-00 1-216-063-91 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 470 22K 220K 12K 3.9K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R059 R060 R061 R062 R063 1-216-089-00 1-216-174-00 1-216-174-00 1-216-033-00 1-216-065-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 47K 100 100 220 4.7K 5% 5% 5% 5% 5% 1/10W 1/8W 1/8W 1/10W 1/10W (KV-21C5B/21X5B) R064 1-216-065-00 RES,CHIP 4.7K 5% R065 R066 R067 1-216-025-00 RES,CHIP 1-216-065-00 RES,CHIP 1-216-065-00 RES,CHIP 100 5% 4.7K 5% 4.7K 5% 1/10W (KV-21C5B/21X5B) 1/10W 1/10W 1/10W Q109 Q110 Q202 Q401 Q405 1-801-806-11 1-801-806-11 8-729-422-27 8-729-216-22 8-729-120-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC144EKA DTC144EKA 2SD601A-Q 2SA1162-G 2SC1623-L5L6 Q408 Q501 Q532 Q533 Q535 8-729-422-27 8-729-422-27 8-729-038-83 8-729-041-25 8-729-119-80 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR Q571 Q574 Q575 Q576 Q601 8-729-105-08 8-729-422-27 1-801-806-11 8-729-422-27 8-729-216-22 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR (KV-21C5B/21X5B) (KV-21C5B/21X5B) < RESISTOR > JR012 1-216-296-00 SHORT 0 (KV-21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5D/21X5E/21X5K/ 21X5L/21X5R/21X5U) 0 0 JR023 JR031 1-216-296-00 SHORT 1-216-295-00 SHORT JR403 JR409 JR411 JR412 JR610 1-216-073-00 1-216-295-00 1-216-295-00 1-216-295-71 1-216-296-00 JR616 JR617 1-216-296-00 SHORT 1-216-296-00 SHORT JW220 8-719-109-89 DIODE RD5.6ESB2 R001 R002 R003 R004 R005 1-216-025-00 1-216-025-00 1-216-065-00 1-216-065-00 1-216-065-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 100 100 4.7K 4.7K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R068 R069 R070 R071 R072 1-216-073-00 1-216-049-00 1-216-081-00 1-216-214-00 1-216-097-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 10K 1K 22K 4.7K 100K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/8W 1/10W R007 R008 R009 R010 R011 1-216-065-00 1-216-025-00 1-216-025-00 1-216-025-00 1-216-025-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 4.7K 100 100 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R073 R075 R077 R082 R083 1-216-097-00 1-216-069-00 1-216-083-00 1-216-053-00 1-216-031-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 100K 6.8K 27K 1.5K 180 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R012 R013 R014 R015 R017 1-247-807-31 1-216-214-00 1-216-057-00 1-216-049-00 1-249-429-11 CARBON RES,CHIP RES,CHIP RES,CHIP CARBON 100 4.7K 2.2K 1K 10K 5% 5% 5% 5% 5% 1/4W 1/8W 1/10W 1/10W 1/4W R084 R085 R086 R087 R088 1-216-053-00 1-216-031-00 1-216-053-00 1-216-180-00 1-216-065-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 1.5K 180 1.5K 180 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/8W 1/10W R019 1-216-053-00 RES,CHIP 1.5K 5% 1/10W R093 1-216-230-00 RES,CHIP 22K 5% 1/8W RES,CHIP 10K SHORT 0 SHORT 0 CONDUCTOR CHIP SHORT 0 5% 1/10W 0 0 57 The components identified by shading and marked are critical for safety Replace only with the part number specified. A REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO DESCRIPTION REMARK R094 R095 R096 R097 R098 1-216-057-00 1-216-025-00 1-247-807-31 1-247-807-31 1-247-807-31 RES,CHIP RES,CHIP CARBON CARBON CARBON 2.2K 100 100 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/4W 1/4W 1/4W R201 R204 R205 R206 R207 1-260-091-11 1-247-863-91 1-260-091-11 1-216-085-00 1-216-295-00 CARBON CARBON CARBON RES,CHIP SHORT 220 22K 220 33K 0 5% 5% 5% 5% 1/2W 1/4W 1/2W 1/10W R099 R101 R106 R110 1-247-807-31 1-216-049-00 1-215-900-11 1-216-206-00 CARBON RES,CHIP METAL OXIDE RES,CHIP 100 1K 22K 2.2K 5% 5% 5% 5% 1/4W 1/10W 2W F 1/8W (KV-21C5B/21X5B) R209 R211 R213 R301 R302 1-216-065-00 1-215-873-21 1-216-093-00 1-216-025-00 1-216-073-00 RES,CHIP METAL OXIDE RES,CHIP RES,CHIP RES,CHIP 4.7K 4.7K 68K 100 10K 5% 5% 5% 5% 5% 1/10W 1W F 1/10W 1/10W 1/10W R111 1-216-057-00 RES,CHIP 2.2K 5% R112 1-216-057-00 RES,CHIP 2.2K 5% R116 1-249-437-11 CARBON 47K 5% 1/10W (KV-21C5B/21X5B) 1/10W (KV-21C5B/21X5B) 1/4W R303 R304 R305 R306 R309 1-216-073-00 1-216-073-00 1-412-002-31 1-216-206-00 1-216-675-11 RES,CHIP RES,CHIP INDUCTOR CHIP RES,CHIP METAL CHIP 10K 5% 10K 5% 4.7UH 2.2K 5% 10K 0.50% 1/8W 1/10W R120 R121 R122 R127 1-216-037-00 1-216-025-00 1-216-025-00 1-216-031-00 330 100 100 180 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W (KV-21C5B/21X5B) R310 R311 R313 R314 R315 1-216-022-00 1-216-029-00 1-216-025-00 1-216-025-00 1-216-075-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 75 150 100 100 12K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R128 1-216-065-00 RES,CHIP R129 1-216-063-91 RES,CHIP R133 1-216-295-00 SHORT 1/10W (KV-21C5B/21X5B) 3.9K 5% 1/10W (KV-21C5B/21X5B) 0 (KV-21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5D/21X5E/21X5K/ 21X5L/21X5R/21X5U) R316 R317 R318 R319 R320 1-216-025-00 1-216-049-00 1-216-025-00 1-216-025-00 1-216-025-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 100 1K 100 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R321 R323 R324 R325 R326 1-216-025-00 1-216-025-00 1-412-002-31 1-412-002-31 1-216-129-00 RES,CHIP 100 5% RES,CHIP 100 5% INDUCTOR CHIP 4.7UH INDUCTOR CHIP 4.7UH RES,CHIP 2.2M 5% 1/10W 1/10W R331 R332 R333 R334 R335 1-216-057-00 1-216-057-00 1-216-057-00 1-216-025-00 1-216-025-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 2.2K 2.2K 2.2K 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R338 R401 R402 R403 R404 1-216-049-00 1-216-113-00 1-216-295-71 1-216-041-00 1-216-113-00 RES,CHIP 1K RES,CHIP 470K CONDUCTOR CHIP RES,CHIP 470 RES,CHIP 470K 5% 5% 1/10W 1/10W 5% 5% 1/10W 1/10W R405 R406 R408 R409 R410 1-216-295-00 1-216-113-00 1-216-022-00 1-216-025-00 1-216-025-00 SHORT RES,CHIP RES,CHIP RES,CHIP RES,CHIP 0 470K 75 100 100 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R411 R412 1-216-022-00 RES,CHIP 1-216-025-00 RES,CHIP 75 100 5% 5% 1/10W 1/10W R142 R143 RES,CHIP RES,CHIP RES,CHIP RES,CHIP 1-216-295-00 SHORT 1-216-025-00 RES,CHIP 1-216-031-91 RES,CHIP 4.7K 5% 0 100 5% 1/10W (KV-21C5B/21X5B) 180 5% 1/10W (KV-21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5D/21X5E/21X5K/ 21X5L/21X5R/21X5U) R144 R145 R147 1-216-079-00 RES,CHIP 1-216-212-00 RES,CHIP 1-216-017-91 RES,CHIP 18K 5% 3.9K 5% 47 5% R148 1-216-174-00 RES,CHIP 100 5% R149 1-216-049-00 RES,CHIP 1K 5% R151 R152 1-216-049-00 RES,CHIP 1-216-025-00 RES,CHIP 1K 100 5% 5% R153 R154 R155 1-216-180-00 RES,CHIP 1-216-238-91 RES,CHIP 1-216-089-00 RES,CHIP 180 47K 47K 5% 5% 5% 1/10W 1/8W 1/10W (KV-21C5B/21X5B) 1/8W (KV-21C5B/21X5B) 1/10W (KV-21C5B/21X5B) 1/10W 1/10W (KV-21C5B/21X5B) 1/8W 1/8W 1/10W 58 1/10W 1/10W 1/10W The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. R413 R414 R415 R417 R418 PART.NO 1-216-295-00 1-216-022-00 1-216-022-00 1-247-804-11 A DESCRIPTION REMARK REF. NO. SHORT RES,CHIP RES,CHIP CARBON 0 75 5% 1/10W 75 5% 1/10W 75 5% 1/4W (KV-21C5B/21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5B/21X5D/21X5E/21X5K/21X5R) 1-247-698-11 CARBON 68 5% 1/4W (KV-21X5L/21X5U) 1-249-413-11 CARBON 470 5% 1/4W (KV-21C5B/21C5D/21C5E/21C5K/21C5R) (KV-21X5A/21X5B/21X5D/21X5E/21X5K/21X5R) 1-249-414-11 CARBON 560 5% 1/4W (KV-21X5L/21X5U) R419 R420 R421 R422 R425 1-216-022-00 1-216-041-00 1-216-113-00 1-216-295-00 1-216-077-00 RES,CHIP RES,CHIP RES,CHIP SHORT RES,CHIP 75 470 470K 0 15K 5% 5% 5% 1/10W 1/10W 1/10W 5% 1/10W R426 R427 R429 R430 R431 1-216-073-00 1-216-113-00 1-216-041-00 1-216-113-00 1-216-295-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP SHORT 10K 470K 470 470K 0 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W R432 R435 R436 R437 R439 1-216-113-00 1-216-022-00 1-216-041-00 1-216-029-00 1-216-041-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 470K 75 470 150 470 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R440 R441 R442 R443 R445 1-216-113-00 1-216-295-00 1-216-077-00 1-216-073-00 1-216-178-00 RES,CHIP SHORT RES,CHIP RES,CHIP RES,CHIP 470K 0 15K 10K 150 5% 1/10W 5% 5% 5% 1/10W 1/10W 1/8W R446 R447 R448 R449 R450 1-216-113-00 1-216-295-71 1-216-113-00 1-216-295-71 1-216-041-00 RES,CHIP 470K 5% CONDUCTOR CHIP RES,CHIP 470K 5% CONDUCTOR CHIP RES,CHIP 470 5% 1/10W R454 R457 R459 R460 R501 1-216-041-00 1-216-025-00 1-247-807-31 1-249-403-11 1-216-081-00 RES,CHIP RES,CHIP CARBON CARBON RES,CHIP 470 100 100 68 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/4W 1/4W 1/10W R502 R503 R504 R505 R506 1-216-097-00 1-215-888-00 1-249-385-11 1-216-667-11 1-216-059-00 RES,CHIP METAL OXIDE CARBON METAL CHIP RES,CHIP 100K 220 2.2 4.7K 2.7K 5% 5% 5% 0.50% 5% 1/10W 2W F 1/4W F 1/10W 1/10W 1/10W 1/10W 59 PART.NO DESCRIPTION REMARK R507 R508 R509 R510 R512 1-216-349-00 1-216-667-11 1-216-059-00 1-216-081-00 1-249-382-11 METAL OXIDE METAL CHIP RES,CHIP RES,CHIP CARBON 1 4.7K 2.7K 22K 1.2 5% 0.50% 5% 5% 5% 1W F 1/10W 1/10W 1/10W 1/4W F R514 R515 R516 R517 R518 1-249-377-11 1-249-377-11 1-249-493-11 1-249-436-11 1-216-065-00 CARBON CARBON CARBON CARBON RES,CHIP 0.47 0.47 56K 39K 4.7K 5% 5% 5% 5% 5% 1/4W F 1/4W F 1/2W 1/4W 1/10W R519 R520 R522 R523 R524 1-216-121-91 1-215-883-11 1-216-097-00 1-216-117-00 1-216-085-00 RES,CHIP METAL OXIDE RES,CHIP RES,CHIP RES,CHIP 1M 33 100K 680K 33K 5% 5% 5% 5% 5% 1/10W 2W F 1/10W 1/10W 1/10W R525 R526 R527 R528 R529 1-216-057-00 1-216-089-00 1-216-075-00 1-216-246-00 1-216-073-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 2.2K 47K 12K 100K 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/8W 1/10W R530 R531 R532 R533 R539 1-216-085-00 1-216-057-00 1-216-065-00 1-216-081-00 1-216-049-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 33K 2.2K 4.7K 22K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R540 R541 R542 R543 R545 1-215-887-00 1-216-105-00 1-216-089-00 1-216-089-00 1-216-129-91 METAL OXIDE RES,CHIP RES,CHIP RES,CHIP RES,CHIP 150 220K 47K 47K 2.2M 5% 5% 5% 5% 5% 2W F 1/10W 1/10W 1/10W 1/10W R546 R547 R548 R549 R551 1-249-401-11 1-535-143-71 1-212-849-00 1-216-371-00 1-215-873-00 CARBON LEAD, JUMPER FUSIBLE METAL OXIDE METAL OXIDE 47 5% (7.5MM) 4.7 5% 1.5 5% 4.7K 5% 1/4W F R552 R553 R554 R571 R572 1-216-061-00 1-249-381-11 1-216-109-91 1-249-417-11 1-216-369-00 RES,CHIP CARBON RES,CHIP CARBON METAL OXIDE 3.3K 1 330K 1K 1 5% 5% 5% 5% 5% 1/10W 1/4W F 1/10W 1/4W F 2W F R573 R574 R575 R576 R581 1-216-101-00 1-216-065-00 1-216-097-00 1-249-399-11 1-216-089-00 RES,CHIP RES,CHIP RES,CHIP CARBON RES,CHIP 150K 4.7K 100K 33 47K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/4W 1/10W R582 R583 1-216-089-00 RES,CHIP 1-216-081-00 RES,CHIP 47K 22K 5% 5% 1/10W 1/10W 1/4W F 2W F 1W F A REF. NO. The components identified by shading and marked are critical for safety Replace only with the part number specified. C PART.NO R588 R589 R590 R591 R593 1-216-051-00 1-216-097-00 1-216-073-00 1-215-892-11 1-249-439-11 R594 R595 R602 R603 R607 DESCRIPTION REMARK RES,CHIP RES,CHIP RES,CHIP METAL OXIDE CARBON 1.2K 100K 10K 1K 68K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 2W F 1/4W 1-216-057-00 1-249-377-11 1-202-961-11 1-202-933-61 £ 1-202-961-11 RES,CHIP CARBON CEMENTED FUSIBLE CEMENTED 2.2K 0.47 1.8 0.1 1.8 5% 5% 5% 10% 5% 1/10W 1/4W F 10W 1/2W F 10W R608 R611 R613 R614 R615 1-215-927-00 1-249-415-11 £ 1-240-030-91 £ 1-240-030-91 1-249-422-11 METAL OXIDE CARBON METAL METAL CARBON 47K 680 4.7M 4.7M 2.7K 5% 5% 5% 5% 5% 3W F 1/4W 1/2W 1/2W 1/4W R616 R617 R619 R622 R627 1-216-393-00 1-249-405-11 1-216-065-00 1-249-401-11 1-249-385-11 METAL OXIDE CARBON RES,CHIP CARBON CARBON 2.2 100 4.7K 47 4.7 5% 5% 5% 5% 5% 3W F 1/4W F 1/10W 1/4W 1/4W F R628 R652 R653 R658 R659 1-247-791-91 1-216-393-00 1-216-393-00 1-215-929-11 1-216-383-11 CARBON METAL OXIDE METAL OXIDE METAL OXIDE METAL OXIDE 22 2.2 2.2 100K 0.33 5% 5% 5% 5% 5% 1/4W 3W 3W 3W 3W R660 R661 R662 R664 R665 1-216-384-11 1-247-843-11 1-215-929-11 1-249-417-11 1-215-877-11 METAL OXIDE CARBON METAL OXIDE CARBON METAL OXIDE 0.39 3.3K 100K 1K 22K 5% 5% 5% 5% 5% 3W F 1/4W 3W F 1/4W 1W F R667 1-215-927-00 METAL OXIDE 47K 5% 3W REF. NO. 1-241-765-11 RES, ADJ, CARBON 22K T511 T531 T601 T602 T603 TRANSFORMER ASSY, FLYBACK NX-1747/U2B TRANSFORMER, HORIZONTAL DRIVE TRANSFORMER, LINE FILTER TRANSFORMER, CONVERTER (SRT) TRANSFORMER, CONVERTER < TUNER > TU101 1-693-418-11 TUNER (TELE9-001A) (KV-21C5B/21X5B) 8-598-432-00 TUNER BTP-AC411 (KV-21C5D/21C5E/21C5K/21C5R/ 21X5A/21X5D/21X5E/21X5K/ 21X5R/21X5L) 8-598-464-00 TUNER BTP-AU611 (KV-21X5U) < CRYSTAL > X001 X302 X303 F F F F 1-578-774-11 VIBRATOR, CRYSTAL 1-567-505-11 OSCILLATOR, CRYSTAL 1-567-504-11 OSCILLATOR, CRYSTAL ********************************************************************** *A-1638-118-A C BOARD, COMPLETE ******************* < CAPACITOR > F (KV-21C5B/21X5B) C701 C702 C703 C708 C710 1-102-114-00 1-102-109-91 1-102-109-91 1-162-114-00 1-136-189-00 CERAMIC CERAMIC CERAMIC CERAMIC FILM 470PF 180PF 180PF 0.0047MF 10MF 10% 10% 10% 10% 50V 50V 50V 2KV 250V C712 C714 C717 C718 C719 1-102-109-91 1-126-967-11 1-102-114-00 1-102-114-00 1-102-114-00 CERAMIC ELECT CERAMIC CERAMIC CERAMIC 180PF 47MF 470PF 470PF 470PF 10% 20% 10% 10% 10% 50V 16V 50V 50V 50V < CONNECTOR > < SWITCH > SWITCH, SWITCH, SWITCH, SWITCH, SWITCH, SWITCH, SWITCH, £ 1-453-279-11 1-437-195-11 £ 1-433-411-11 1-431-732-11 £ 1-431-777-11 THP601 £ 1-808-059-31 THERMISTOR, POSITIVE RY601 £ 1-755-245-11 RELAY, AC POWER 1-571-532-21 1-571-532-21 1-571-532-21 1-571-532-21 1-571-532-21 1-571-532-21 £ 1-571-433-21 REMARK < THERMISTOR > < RELAY > S001 S002 S003 S004 S005 S006 S601 DESCRIPTION < TRANSFORMER > < VARIABLE RESISTOR > RV101 PART.NO CN702 CN703 CN706 CN707 TACTIL TACTIL TACTIL TACTIL TACTIL TACTIL PUSH (AC POWER) 60 1-695-915-11 *1-564-509-11 1-695-915-21 *1-564-508-51 TAB (CONTACT) PLUG, CONNECTOR 6P TAB (CONTACT) PLUG, CONNECTOR 5P The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO C DESCRIPTION REMARK REF. NO. < DIODE > D701 D702 D703 D704 D705 8-719-109-89 8-719-991-33 8-719-991-33 8-719-991-33 8-719-991-33 DIODE DIODE DIODE DIODE DIODE RD5.6ESB2 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 D706 D707 D708 D709 D710 8-719-991-33 8-719-991-33 1-535-143-61 8-719-991-33 8-719-991-33 DIODE DIODE LEAD, DIODE DIODE 1SS133T-77 1SS133T-77 JUMPER (5.0MM) 1SS133T-77 1SS133T-77 D711 D712 D713 D714 D715 1-216-349-00 8-719-991-33 1-535-303-00 8-719-991-33 1-535-143-61 METAL DIODE LEAD, DIODE LEAD, OXIDE 1 5% 1SS133T-77 JUMPER (5.0MM) 1SS133T-77 JUMPER (5.0MM) D716 D718 D719 8-719-991-33 DIODE 1SS133T-77 8-719-991-33 DIODE 1SS133T-77 1-535-143-61 LEAD, JUMPER (5.0MM) 1W F < CRT SOCKET > J701 £ 1-251-595-11 SOCKET, CRT < COIL > L704 1-414-186-31 MICRO INDUCTOR 33UH < TRANSISTOR > Q702 Q703 Q704 Q705 Q706 8-729-119-78 8-729-046-28 8-729-200-17 8-729-119-78 8-729-046-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC2785-HFE BF420-126 2SA1091-0 2SC2785-HFE BF420-126 Q707 Q708 Q709 Q710 Q712 8-729-200-17 8-729-119-78 8-729-046-28 8-729-200-17 8-729-046-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SA1091-0 2SC2785-HFE BF420-126 2SA1091-0 BF420-126 Q713 8-729-046-28 TRANSISTOR BF420-126 1-247-895-91 1-215-899-11 1-535-143-61 1-260-099-11 1-247-815-91 CARBON METAL OXIDE LEAD, JUMPER CARBON CARBON 470K 5% 15K 5% (5.0MM) 1K 5% 220 5% DESCRIPTION 330 180 6.8K 1K 68K REMARK R707 R708 R711 R712 R713 1-249-411-11 1-249-408-11 1-249-427-11 1-260-099-11 1-249-439-11 CARBON CARBON CARBON CARBON CARBON R714 R715 R716 R717 R718 1-215-899-11 1-535-143-11 1-247-815-91 1-249-411-11 1-202-814-11 METAL OXIDE LEAD, JUMPER CARBON CARBON SOLID 15K 5% (10.0MM) 220 5% 330 5% 33K 10% R719 R720 R721 R722 R723 1-249-408-11 1-249-427-11 1-535-143-61 1-202-848-00 1-535-143-11 CARBON CARBON LEAD, JUMPER SOLID LEAD, JUMPER 180 5% 6.8K 5% (5.0MM) 680K 10% (10.0MM) R726 R727 R728 R729 R730 1-260-099-11 1-247-815-91 1-216-351-00 1-249-411-11 1-249-408-11 CARBON CARBON METAL OXIDE CARBON CARBON R731 R734 R736 R737 R739 1-249-427-11 1-247-807-31 1-215-899-11 1-247-891-00 1-535-143-11 R741 R743 R746 R750 R751 1-202-549-00 1-535-143-61 1-249-417-11 1-249-417-11 1-249-417-11 1K 220 1.5 330 180 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/2W 1/4W 2W F 1/4W 1/4W 1/2W 1/4W 1/4W 1/2W 5% 5% 5% 5% 5% 1/2W 1/4W 1W F 1/4W 1/4W CARBON CARBON METAL OXIDE CARBON LEAD, JUMPER 6.8K 5% 100 5% 15K 5% 330K 5% (10.0MM) 1/4W 1/4W 2W F 1/4W SOLID LEAD, JUMPER CARBON CARBON CARBON 100 20% (5.0MM) 1K 5% 1K 5% 1K 5% 1/2W 1/4W 1/4W 1/4W < VARIABLE RESISTOR > RV702 1-241-656-21 RES, ADJ, METAL FILM 110M ********************************************************************** *A-1652-056-A S1 BOARD, COMPLETE ****************** *A-1652-053-A S1 BOARD, COMPLETE ****************** *A-1652-052-A S1 BOARD, COMPLETE ****************** < RESISTOR > R701 R702 R703 R705 R706 PART.NO S1 (KV-21C5B/21X5B) (KV-21C5D/21C5R/21X5A/ 21X5D/21X5R) (KV-21C5E/21C5K/21X5E/ 21X5K/21X5L/21X5U) < CAPACITOR > 1/4W 2W F C1103 C1106 C1107 C1108 C1109 1/2W 1/4W 61 1-164-232-11 1-164-232-11 1-164-232-11 1-164-232-11 1-104-664-11 CERAMIC CERAMIC CERAMIC CERAMIC ELECT CHIP CHIP CHIP CHIP 0.01MF 0.01MF 0.01MF 0.01MF 47MF 10% 10% 10% 10% 20% 50V 50V 50V 50V 25V The components identified by shading and marked are critical for safety Replace only with the part number specified. S1 REF. NO. PART.NO DESCRIPTION C1112 C1113 C1114 C1115 C1118 1-163-001-11 1-104-664-11 1-163-001-11 1-104-664-11 1-162-637-11 CERAMIC CHIP 220PF ELECT 47MF CERAMIC CHIP 220PF ELECT 47MF CERAMIC CHIP 0.47MF C1120 C1122 C1123 C1124 C1127 1-164-005-11 1-104-664-11 1-164-004-11 1-163-251-11 1-163-239-11 CERAMIC ELECT CERAMIC CERAMIC CERAMIC CHIP 0.47MF 47MF CHIP 0.1MF CHIP 100PF CHIP 33PF 1-163-235-11 CERAMIC CHIP 22PF REMARK 10% 20% 10% 20% REF. NO. PART.NO DESCRIPTION < FILTER > 50V 25V 50V 25V 16V CF1101 1-409-327-00 TRAP, CERAMIC (6.5MHZ) 25V 20% 25V 10% 25V 5% 50V 5% 50V (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) 5% 50V (KV-21C5D/21C5R) (KV-21X5A/21X5D/21X5R) CN1101 1-766-925-11 CONNECTOR, BOARD TO BOARD 18P < DIODE > D1101 8-719-066-72 DIODE BB135 1-216-295-00 SHORT < FERRITE BEAD > 5% 50V 10% 25V (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) FB1101 FB1102 FB1103 FB1104 FB1105 1-410-396-41 1-410-396-41 1-410-396-41 1-410-396-41 1-410-396-41 FERRITE FERRITE FERRITE FERRITE FERRITE C1130 1-110-501-11 CERAMIC CHIP 0.33MF C1131 1-164-005-11 CERAMIC CHIP 0.47MF 10% 16V (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) 25V (KV-21C5B/21C5D/21C5R) (KV-21X5A/21X5B/21X5D/ 21X5R) FB1110 FB1111 FB1112 FB1113 1-412-002-31 1-412-002-31 1-412-002-31 1-412-002-31 INDUCTOR INDUCTOR INDUCTOR INDUCTOR C1137 1-104-664-11 ELECT C1138 1-163-109-00 CERAMIC CHIP 47PF C1143 C1144 C1145 1-163-005-11 CERAMIC CHIP 470PF 1-163-005-11 CERAMIC CHIP 470PF 1-163-077-00 CERAMIC CHIP 0.1MF C1146 C1147 C1148 C1149 C1150 1-164-005-11 1-164-005-11 1-164-005-11 1-126-960-11 1-126-960-11 C1151 C1152 1-104-664-11 ELECT 47MF 1-164-004-11 CERAMIC CHIP 0.1MF 47MF CERAMIC CHIP 0.47MF CERAMIC CHIP 0.47MF CERAMIC CHIP 0.47MF ELECT 1MF ELECT 1MF IC1101 25V 25V 50V (KV-21C5B/21X5B) 20% 25V (KV-21C5B/21X5B) IC1102 IC1103 25V 25V 4.7UH 4.7UH 4.7UH 4.7UH (KV-21C5B/21X5B) 8-759-466-48 IC TDA9875P (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) (KV-21C5D/21C5R) (KV-21X5A/21X5D/21X5R) 8-759-100-96 IC UPC4558G2 8-759-394-57 IC PST593C-MMP-4P < COIL > 50V (KV-21C5B/21X5B) 10% 50V 10% 50V 10% 25V 20% 10% CHIP CHIP CHIP CHIP 8-759-522-62 IC TDA9870 5% 20% 20% 0.45UH 0.45UH 0.45UH 0.45UH 0.45UH < IC > 20% 10% 5% 25V 25V 25V 50V 50V (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) (KV-21C5D/21C5R/21X5A/ 21X5D/21X5R) 0 1-163-239-11 CERAMIC CHIP 33PF 1-163-989-11 CERAMIC CHIP 0.033MF 1-104-664-11 ELECT 47MF 1-164-004-11 CERAMIC CHIP 0.1MF 1-163-117-00 CERAMIC CHIP 100PF (KV-21C5B/21X5B) < CONNECTOR > C1128 C1129 C1132 C1133 C1135 REMARK L1101 1-408-596-31 INDUCTOR 2.7UH L1113 L1114 1-408-600-31 INDUCTOR 1-410-671-31 INDUCTOR 5.6UH 47UH L1115 L1116 L1117 1-408-599-31 INDUCTOR 1-408-599-31 INDUCTOR 1-410-671-31 INDUCTOR 4.7UH 4.7UH 47UH (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) (KV-21C5B/21X5B) (KV-21C5B/21X5B) < TRANSISTOR > Q1112 Q1113 62 8-729-620-06 TRANSISTOR 2SC3052-EF 8-729-620-06 TRANSISTOR 2SC3052-EF (KV-21C5B/21X5B) (KV-21C5B/21X5B) The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. Q1114 Q1115 PART.NO S1 DESCRIPTION REMARK 8-729-216-22 TRANSISTOR 2SA1162-G 8-729-620-06 TRANSISTOR 2SC3052-EF REF. NO. (KV-21C5B/21X5B) (KV-21C5B/21X5B) < RESISTOR > PART.NO DESCRIPTION REMARK R1167 1-216-025-00 RES,CHIP 100 5% R1168 1-216-033-00 RES,CHIP 220 5% R1169 1-216-049-00 RES,CHIP 1K 5% R1170 1-216-001-00 RES,CHIP 10 5% 1/10W (KV-21C5B/21X5B) 1/10W (KV-21C5B/21X5B) 1/10W (KV-21C5B/21X5B) JR1105 JR1112 JR1113 1-216-295-00 SHORT 1-216-295-00 SHORT 1-216-295-00 SHORT 0 0 0 R1101 R1102 R1103 R1105 R1108 1-216-073-00 1-216-073-00 1-216-035-00 1-216-035-00 1-216-057-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 10K 10K 270 270 2.2K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W (KV-21C5B/21X5B) R1171 1-216-045-00 RES,CHIP 680 5% R1172 1-216-190-00 RES,CHIP 470 5% R1173 1-216-049-00 RES,CHIP 1K 5% R1110 R1111 R1113 R1116 1-216-025-00 1-216-025-00 1-216-073-00 1-216-689-11 RES,CHIP RES,CHIP RES,CHIP METAL CHIP 100 100 10K 39K 5% 1/10W 5% 1/10W 5% 1/10W 0.50% 1/10W (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) (KV-21C5D/21C5R) (KV-21X5A/21X5D/21X5R) R1174 R1175 R1176 1-216-085-00 RES,CHIP 1-216-085-00 RES,CHIP 1-216-085-00 RES,CHIP 33K 33K 33K 5% 5% 5% 1/10W (KV-21C5B/21X5B) 1/10W 1/10W 1/10W R1177 R1178 1-216-085-00 RES,CHIP 1-216-073-00 RES,CHIP 33K 10K 5% 5% 1/10W 1/10W 1-216-295-00 SHORT 0 R1117 1-216-073-00 RES,CHIP 10K R1118 1-216-689-11 RES,CHIP 39K R1121 R1122 R1123 R1124 R1125 1-216-065-00 1-216-065-00 1-216-065-00 1-216-073-00 1-216-065-00 4.7K 4.7K 4.7K 10K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R1126 R1152 1-216-073-00 RES,CHIP 1-216-035-00 RES,CHIP 10K 270 5% 5% R1153 R1154 1-216-025-00 RES,CHIP 1-216-067-00 RES,CHIP 100 5% 5.6K 5% 1/10W 1/10W (KV-21C5B/21X5B) 1/10W 1/10W R1160 R1161 R1162 R1163 R1164 1-216-230-00 1-216-190-00 1-216-061-00 1-216-081-00 1-216-073-00 22K 470 3.3K 22K 10K R1165 1-216-295-00 SHORT RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 0 < CRYSTAL > X1101 5% 1/10W (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) 5% 1/10W (KV-21C5B/21C5E/21C5K) (KV-21X5B/21X5E/21X5K/ 21X5L/21X5U) 5% 5% 5% 5% 5% 1/10W (KV-21C5B/21X5B) 1/10W (KV-21C5B/21X5B) 1/8W (KV-21C5B/21X5B) 1-767-813-21 VIBRATOR, CRYSTAL ************************************************************** 1/8W 1/8W 1/10W 1/10W 1/10W (KV-21C5B/21X5B) (KV-21C5D/21C5R) (KV-21X5A/21X5D/21X5R) 63 The components identified by shading and marked are critical for safety Replace only with the part number specified. REF. NO. PART.NO DESCRIPTION REMARK REF. NO. PART.NO < MISCELLANEOUS > ***************** £ 1-411-922-11 1-452-032-00 1-452-094-00 £ 1-453-279-11 1-505-924-11 8-598-464-01 8-738-784-05 8-451-295-45 8-738-787-71 1-540-006-22 COIL, DEGAUSSING MAGNET, DISC; 10MM Ø MAGNET, ROTATABLE DISC; 15MM Ø TRANSFORMER ASSY, FLYBACK NX-1747/U2B SPEAKER (15X6.5CM) 4-042-477-01 4-042-179-01 4-204-173-01 4-204-176-01 4-204-413-41 BAG PROTECTION INDIVIDUAL CARTON CUSHION (UPPER) (ASSY) CUSHION (LOWER) (ASSY) MANUAL INSTRUCTION (KV-21X5A) (ITALIAN) 4-204-413-51 MANUAL INSTRUCTION (KV-21X5B) (FRENCH/GERMAN/ITALIAN/DUTCH) 4-204-413-11 MANUAL INSTRUCTION (KV-21X5D) (GERMAN/ENGLISH/DUTCH/GREEK/TURKISH) 4-204-413-71 MANUAL INSTRUCTION (KV21X5E) (SPANISH) TUNER (BTP-AU611) (KV-21X5U) PICTURE TUBE (SD-169) (A51JXH61X) DEFLECTION YOKE (Y21PFA2BA) ITC CAP ASSY, HIGH-VOLTAGE 4-204-413-91 MANUAL INSTRUCTION (KV-21X5K) (CZECH/ENGLISH/POLISH/HUNGARIAN) 4-204-414-61 MANUAL INSTRUCTION (KV-21X5L) (ENGLISH) 4-204-414-91 MANUAL INSTRUCTION (KV-21X5R) (RUSSIAN/BULGARIAN/ENGLISH) *************************************************************** ACCESSORIES AND PACKING MATERIALS (KV-21C5) ********************************* *4-395-957-01 *4-204-187-01 *4-204-181-01 *4-204-184-01 4-204-358-51 REMARK ACCESSORIES AND PACKING MATERIALS (KV-21X5) ********************************* £ 1-571-433-21 SWITCH, PUSH (AC POWER) £ 1-756-286-11 CORD, POWER 1-693-418-11 TUNER (TELE9-001A) (KV-21C5B/21X5B) 8-598-432-00 TUNER (BTP-AC411) (KV-21C5D/21C5E/21C5K/21C5R 21X5A/21X5D/21X5E/215K/ 21X5R/21X5L) £ £ £ £ DESCRIPTION 4-204-413-61 MANUAL INSTRUCTION (KV-21X5U) (ENGLISH) BAG PROTECTION INDIVIDUAL CARTON CUSHION (UPPER) (ASSY) CUSHION (LOWER) (ASSY) MANUAL, INSTRUCTION (KV-21C5B) (FRENCH/GERMAN/ITALIAN/DUTCH) ******************************************************************* REMOTE COMMANDER **************** 1-475-765-11 COMMANDER STANDARD TYPE (RM883) 4-204-358-11 MANUAL, INSTRUCTION (KV-21CD) (GERMAN/ENGLISH/DUTCH/GREEK/TURKISH) 4-204-358-71 MANUAL, INSTRUCTION (KV-21C5E) (SPANISH) 4-204-358-81 MANUAL, INSTRUCTION (KV-21C5E) (PORTUGUESE/SWEDISH/DANISH/ NORWEGIAN/FINNISH) ******************************************************************* 4-204-358-91 MANUAL, INSTRUCTION (KV-21C5K) (CZECH/ENGLISH/POLISH/HUNGARIAN) 4-203-361-91 MANUAL, INSTRUCTION (KV-21C5R) (RUSSIAN/BULGARIAN/ENGLISH) Sony Corporation 9-974-972-01 Sony UK Service Promotions Dept. 64 English 98FP7173-1 Printed in U.K. © 1998.6