Download Intermec EasyCoder 3440 Thermal Label Printer

User's Manual
3400, 3440, and
3600 Bar Code
Label Printer
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Avenue West
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided solely for the purpose of allowing customers
to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for
any other purpose without written permission of Intermec.
Information and specifications contained in this document are subject to change without prior notice and do
not represent a commitment on the part of Intermec Technologies Corporation.
 2003 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar, Data Collection Browser, dcBrowser,
Duratherm, EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under
license), InterDriver, Intermec Printer Network Manager, IRL, JANUS, LabelShop, Mobile Framework,
MobileLAN, Nor*Ware, Pen*Key, Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP,
Universal Access Point, and Virtual Wedge are either trademarks or registered trademarks of Intermec
Technologies Corporation.
Throughout this manual, trademarked names may be used. Rather than put a trademark ( or ) symbol in
every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of infringement.
There are U.S. and foreign patents pending.
The name Centronics is wholly owned by GENICOM Corporation.
IBM is a registered trademark of International Business Machines Corporation.
ii
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Document Change Record
This page records changes to this document. The document was originally released as version 001.
Version
Date
Description of Change
002
10/2003
Updated the user’s manual to include the EasyLAN 10i2 adapter accessory.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
iii
iv
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
1233*Helv Condensed
Contents
Contents
Before You Begin...............................................................................................................xi
Safety Summary....................................................................................................xi
Safety Icons ..........................................................................................................xi
Global Services and Support ................................................................................xii
Who Should Read This Document? ...................................................................xiii
Related Documents ............................................................................................xiii
1
Getting Started............................................................................................................................. 1
Using This Manual.............................................................................................................2
Getting to Know Your Printer ............................................................................................2
Preparing the Printer for Installation ..................................................................................4
Plugging In the Printer ..........................................................................................4
Opening the Printer...............................................................................................5
Loading Media for Fanfold Printing ......................................................................5
Printing the Hardware Configuration Test Label...................................................7
What the Hardware Configuration Test Label Tells You ..........................8
If a Hardware Configuration Test Label Does Not Print ..........................8
Connecting the Printer to Your System ..............................................................................8
Connecting Your Printer to a PC...........................................................................9
Connecting the Printer to a PC Serial Port ...............................................9
Connecting the Printer to a PC Parallel Port ..........................................10
Connecting Your Printer to a Network................................................................10
Connecting the Printer to an AS/400...................................................................10
Connecting the Printer to a Mainframe ...............................................................11
Cabling in Noisy Electrical Environments ...........................................................11
Configuring the Serial Port for Communications .............................................................11
Verifying Printer Communications With Your System .....................................................13
2
Operating the Printer ............................................................................................................. 15
Learning How to Operate the Printer ...............................................................................16
Understanding the Front Panel.........................................................................................16
Understanding the Front Panel LEDs..................................................................16
Using the Feed/Pause Button...............................................................................17
Loading Media Into the Printer ........................................................................................18
Loading Roll Media for Straight-Through Printing .............................................18
Loading Media for Self-Strip Printing .................................................................20
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
v
Contents
*1233*
Loading Thermal Transfer Ribbon ...................................................................................22
Setting the Media Sensitivity Number ..............................................................................25
Setting the MSN for Intermec Media and Ribbon...............................................26
Setting the MSN for Other Media and Ribbon ...................................................26
Communicating With the Printer.....................................................................................28
Using the PrintSet Software.................................................................................29
Using Third-Party Software.................................................................................29
Using Intermec Printer Language (IPL) Commands ............................................29
Printing a Test Label ...........................................................................................29
3
Maintaining the Printer ......................................................................................................... 31
Inspecting the Printer .......................................................................................................32
Tools for Cleaning the Printer ..........................................................................................32
Maintenance Schedule ......................................................................................................32
Cleaning the Printhead ........................................................................................34
Cleaning the Printer Covers.................................................................................36
Cleaning the Drive Roller and Tear Bar...............................................................36
Cleaning the Media Guides and Media Path........................................................37
Cleaning the Label Sensors ..................................................................................38
4
Troubleshooting ........................................................................................................................ 41
Troubleshooting Checklist................................................................................................42
Printer Operation Problems..............................................................................................42
Print Quality Problems.....................................................................................................44
Communication Problems................................................................................................45
5
Optimizing Printer Performance ..................................................................................... 47
Optimizing and Maintaining Print Quality ......................................................................48
Correcting Uneven Print Quality......................................................................................48
Adjusting the Print Darkness ............................................................................................49
Adjusting the Label Mark Sensor ......................................................................................50
Using the Printer Memory Efficiently...............................................................................51
How Is the Printer RAM Used? ...........................................................................52
Making the Most of Your RAM ..........................................................................52
Increasing Throughput .....................................................................................................52
What Is an Image Band? ......................................................................................53
vi
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
1233*Helv Condensed
Contents
How Does the Image Bands Command Work? ...................................................53
Optimizing Print Speed and Image Band Setting.................................................53
Optimizing Image Bands for Batch Printing........................................................54
6
Using Test and Service Mode ............................................................................................. 55
Using Test and Service Mode Procedures .........................................................................56
Printing Test Labels.............................................................................................58
Using Data Line Print .........................................................................................58
Performing Selective Transfer ..............................................................................58
Resetting the Memory on Your Printer ................................................................59
Setting Configuration Commands in Test and Service Mode ...........................................61
Setting the Number of Dot Increments ...............................................................61
Adjusting the Label Rest Point.............................................................................63
Setting Emulation Mode .....................................................................................64
Using Forms Adjust.............................................................................................65
X Forms Adjust ......................................................................................66
Y Forms Adjust.......................................................................................67
A
Specifications .............................................................................................................................. 69
Printer Specifications ........................................................................................................70
Electrical Requirements ..........................................................................70
Environment ..........................................................................................70
Communications ....................................................................................70
Printing Method.....................................................................................70
Self-Strip ................................................................................................71
3400 Specifications..............................................................................................71
Dimensions (No Options Installed)........................................................71
Character Sets.........................................................................................71
Memory..................................................................................................71
Printhead................................................................................................72
Ribbon ...................................................................................................72
Printing Speed ........................................................................................72
Fonts and Graphics.................................................................................72
Media .....................................................................................................73
3440 Specifications..............................................................................................74
Dimensions (No Options Installed)........................................................74
Character Sets.........................................................................................74
Memory..................................................................................................74
Printhead................................................................................................74
Ribbon ...................................................................................................74
Printing Speed ........................................................................................74
Fonts and Graphics.................................................................................75
Media .....................................................................................................75
3600 Specifications..............................................................................................76
Dimensions (no options installed) ..........................................................76
Character Sets.........................................................................................76
Memory..................................................................................................76
Printhead................................................................................................76
Ribbon ...................................................................................................76
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
vii
Contents
*1233*
Printing Speed ........................................................................................76
Fonts and Graphics.................................................................................77
Media .....................................................................................................77
Printer Options ................................................................................................................78
Memory Expansion and Fonts .............................................................................78
3400 Printer ...........................................................................................78
3440 Printer ...........................................................................................78
3600 Printer ...........................................................................................78
Communication Interface....................................................................................79
Twinax Interface.....................................................................................79
Coax Interface ........................................................................................79
Centronics Parallel Interface ...................................................................79
EasyLAN 10i2 Adapter...........................................................................79
Finishers ..............................................................................................................79
Cutter.....................................................................................................79
Batch Takeup .........................................................................................80
Self-Strip Printing...................................................................................80
Parallel Interface Pin Descriptions ....................................................................................80
Bar Code Symbologies Supported.....................................................................................81
B
Character Sets ............................................................................................................................. 83
International Character Sets..............................................................................................84
Advanced Character Table...................................................................................84
Emulation Mode Character Table .......................................................................85
IBM Translation Character Table........................................................................85
Code Page 850 Character Table...........................................................................86
Extended Character Sets ...................................................................................................86
C
Communications Reference ............................................................................................... 93
Communication Protocols................................................................................................94
Intermec Standard Protocol .................................................................................94
XON/XOFF Protocol (Software and Hardware Flow Control) ...........................95
XON/XOFF, No Status Protocol ........................................................................96
Polling Mode D...................................................................................................96
Multi-Drop Protocol ...........................................................................................96
User-Defined Protocol.........................................................................................96
Host Requirements..............................................................................................98
Communications Boundaries...............................................................................98
Communications Interfaces ..............................................................................................98
RS-232 Serial Interface ........................................................................................98
RS-422 Serial Interface ........................................................................................99
RS-485 Serial Interface ........................................................................................99
Printer Serial Port ...........................................................................................................102
viii
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
1233*Helv Condensed
D
Contents
Full ASCII Table ......................................................................................................................... 103
Full ASCII Table ............................................................................................................104
Full ASCII Control Characters Table .............................................................................106
G
Glossary ........................................................................................................................................ 107
I
Index ............................................................................................................................................... 115
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
ix
Contents
x
*1233*
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Before You Begin
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Summary
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can be
damaged if you do not follow the safety warnings and cautions.
Do not repair or adjust alone
Do not repair or adjust energized equipment alone under any
circumstances. Someone capable of providing first aid must always be
present for your safety.
First aid
Always obtain first aid or medical attention immediately after an injury.
Never neglect an injury, no matter how slight it seems.
Resuscitation
Begin resuscitation immediately if someone is injured and stops breathing.
Any delay could result in death. To work on or near high voltage, you
should be familiar with approved industrial first aid methods.
Energized equipment
Never work on energized equipment unless authorized by a responsible
authority. Energized electrical equipment is dangerous. Electrical shock
from energized equipment can cause death. If you must perform
authorized emergency work on energized equipment, be sure that you
comply strictly with approved safety regulations.
Safety Icons
This section explains how to identify and understand dangers, warnings,
cautions, and notes that are in this document. You may also see icons that
tell you when to follow ESD procedures and when to take special
precautions for handling optical parts.
A warning alerts you of an operating procedure, practice, condition,
or statement that must be strictly observed to avoid death or serious
injury to the persons working on the equipment.
Avertissement: Un avertissement vous avertit d’une procédure de
fonctionnement, d’une méthode, d’un état ou d’un rapport qui doit
être strictement respecté pour éviter l’occurrence de mort ou de
blessures graves aux personnes manupulant l’équipement.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
xi
Before You Begin
*1233*
A caution alerts you to an operating procedure, practice, condition, or
statement that must be strictly observed to prevent equipment damage
or destruction, or corruption or loss of data.
Attention: Une précaution vous avertit d’une procédure de
fonctionnement, d’une méthode, d’un état ou d’un rapport qui doit
être strictement respecté pour empêcher l’endommagement ou la
destruction de l’équipement, ou l’altération ou la perte de données.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the Intermec
web site at http://www.intermec.com and click Service & Support. The
Intermec Global Sales & Service page appears. From the Service &
Support menu, move your pointer over Support, and then click
Warranty.
Disclaimer of warranties: The sample code included in this document is
presented for reference only. The code does not necessarily represent
complete, tested programs. The code is provided “as is with all faults.” All
warranties are expressly disclaimed, including the implied warranties of
merchantability and fitness for a particular purpose.
Web Support
Visit the Intermec web site at http://www.intermec.com to download our
current manuals in PDF format. To order printed versions of the Intermec
manuals, contact your local Intermec representative or distributor.
Visit the Intermec technical knowledge base (Knowledge Central) at
http://intermec.custhelp.com to review technical information or to request
technical support for your Intermec product.
xii
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Before You Begin
Telephone Support
These services are available from Intermec Technologies Corporation.
In the U.S.A. and Canada,
call 1-800-755-5505 and
choose this option
Service
Description
Factory Repair and
On-site Repair
Request a return authorization
number for authorized service
center repair, or request an onsite repair technician.
1
Technical Support
Get technical support on your
Intermec product.
2
Service Contract
Status
Inquire about an existing
contract, renew a contract, or
ask invoicing questions.
3
Schedule Site Surveys
or Installations
Schedule a site survey, or
request a product or system
installation.
4
Ordering Products
Talk to sales administration,
place an order, or check the
status of your order.
5
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the Intermec
web site, click Contact.
Who Should Read This Document?
The manual provides you with information about the features of the 3400
(A, B, C, and D), 3440, and 3600 printers, and tells you how to install,
configure, operate, maintain, and troubleshoot them. For information
about the 3400e printer, see the EasyCoder 3400e Bar Code Label Printer
User’s Manual (P/N 071881).
Before you install and configure the 3400, 3440, or 3600, you should be
familiar with your network and general networking terms, such as IP
address.
Related Documents
The Intermec web site at http://www.intermec.com contains our
documents that you can download in PDF format.
To order printed versions of the Intermec manuals, contact your local
Intermec representative or distributor.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
xiii
Before You Begin
xiv
*1233*
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
1
Getting Started
This chapter introduces the 3400 (A, B, C, and D), 3440, and 3600
printer and explains how to get your new printer running for the first time.
This chapter covers these topics:
• Learning about the printer
• Preparing the printer for installation
• Connecting the printer to your system
• Configuring the printer’s serial port
• Verifying printer communications with your system
For information about the 3400e printer, see the EasyCoder 3400e Bar
Code Label Printer User’s Manual (P/N 071881).
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
1
Chapter 1— Getting Started
Using This Manual
Use this manual to learn about your Intermec 3400, 3440, or 3600
printer. Although the three printers are almost identical in form and
function, they do have some small differences.
Throughout this manual you will find these icons next to information that
pertains to a specific printer model.
Identifies information that is unique to the 200 dpi 3400 printer.
Identifies information that is unique to the 400 dpi 3440 printer.
Identifies information that is unique to the 200 dpi 3600 printer.
Note: The 3440 printer appears in most of the illustrations in this manual.
Getting to Know Your Printer
Features of your printer include:
• support for direct thermal and thermal transfer printing applications.
Chapters 1 and 2 explain how to load both types of media.
• an internal self-strip with integral liner takeup. See Chapter 2,
“Operating the Printer,” for more information.
• an easy-to-use software application called PrintSet. PrintSet makes
configuring your printer, downloading fonts and graphics, and printing
a test label effortless.
• minimal supervision and maintenance.
• support for user-supplied fonts. You can easily download and print usersupplied fonts. See the PrintSet software application or the IPL
Programming Reference Manual (P/N 066396) for more information.
• support for TrueType. You can easily download and print TrueType
fonts. See the PrintSet software application or the IPL Programming
Reference Manual (P/N 066396) for more information.
Use the following illustrations to familiarize yourself with your printer.
2
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 1— Getting Started
Media
window
Power/Data
LED
Alert LED
Po
Empty/Pause
button
we
r/D
Ale
Media
cover
ata
rt
Em
pty
/P
au
se
Fe
ed
/P
au
se
Inte
Feed/Pause
button
rme
34
c
40
Media access
door
3XXXU.002
Printer front view: This illustration shows the features on the front of the printer.
Darkness adjust
control
DIP switches
1 2 3 4 5 6 7 8
Optional I/O
board port
1 2 3 4 5 6 7 8
Serial communications
port
On/Off
switch
I
O
Media
window
Media
cover
AC power cord
receptacle
Fanfold media
access slot
3XXXU.003
Printer back view: This illustration shows the features on the back of the printer.
Several options are available for use with your printer. See Appendix A,
“Specifications,” for complete descriptions of these options.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
3
Chapter 1— Getting Started
Preparing the Printer for Installation
Before connecting your printer to your data collection system, you need
to:
• plug in the printer.
• open the printer and load media.
• print a configuration test label.
Plugging In the Printer
The back of your printer contains the AC power receptacle, the serial
communications port, the On/Off switch, and two banks of DIP switches.
To plug in the printer
1 Turn the On/Off switch to the off position.
2 Make sure you set the DIP switches to their factory default settings.
Top Bank
Set switch 1 on (I). Set switches 2 through 8 off (O).
Bottom Bank
Set switches 1 through 8 off (O).
For a description of the DIP switch settings, see “Configuring the Serial
Port for Communications” on page 11.
1
1
2
2
3
I
4
I
O
5
O
6
7
8
1
2
3
4
5
I
O
6
3
7
8
1 2 3 4 5 6 7 8
I
O
1 2 3 4 5 6 7 8
I
O
3XXXU.004
4
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 1— Getting Started
3 Plug the AC power cord into the receptacle at the rear of the printer.
Plug the other end of the power cord into a grounded wall outlet or
surge protector.
4 Turn the On/Off switch to the on position. When you power on the
printer, the Power On LED lights, the Empty/Pause LED flashes, and
the platen roller advances. The yellow Empty/Pause LED then stays on
steady because you have not loaded media yet.
Opening the Printer
You need to open the printer every time you load media or perform
maintenance procedures.
To open the printer
1 Place the fingers of your right hand between the two notches on the
lower edge of the media cover (the media cover release) and pull the
bottom of the media cover away from the base of the printer.
3
2
Pow
er
/D
ata
Ale
rt
Em
pty
/P
au
se
Fe
ed
/P
au
se
Inte
rme
c
34
40
1
3XXXU.005
2 Grasp the front of the media cover with your left hand and lift the front
of the media cover upward to release it from the printer frame.
3 Lift the media cover away from the top of the printer.
Loading Media for Fanfold Printing
Use the sample of fanfold media provided in the Media Envelope to
complete the following procedures. In fanfold printing, you place a stack
of fanfold media at the rear of the printer and feed it into the printer
through a slot in the rear cover. Refer to Chapter 2, “Operating the
Printer,” for instructions on loading rolls of media.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
5
Chapter 1— Getting Started
To load media for fanfold printing
1 Open the printer.
2 Disengage the printhead by rotating the head lift lever clockwise until it
releases.
3 Move the supply roll retainer by turning it counterclockwise and sliding
it to the outer end of the supply post.
4 Place the fanfold media slightly lower than the slot in the printer back
cover. Line the (box of) fanfold media up with the label path through
the printer. Insert media through the slot at the rear of the printer and
thread it over the supply roll post.
➤
➤
➤
I
O
Lower
media guide
Edge
guide
Media access
slot
1 2 3 4 5 6 7 8
➤
Head lift
lever
1 2 3 4 5 6 7 8
➤
Fanfold
media
Supply
roll
post
Supply
roll
retainer
3XXXU.006
5 To allow easy access to the media path, pull down on the lower media
guide. Make sure that the edge guide is slid all the way to the outer edge
of the edge guide plate.
6 Insert the fanfold media through the printer mechanism as shown in the
illustration on the next page. The front edge of the media should pass
over the tear bar and through the label dispense opening in the media
cover. The fanfold media should pass over the supply roll post.
6
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 1— Getting Started
7 Release the lower media guide and adjust the edge guide to position the
media firmly against the inside wall of the printer.
8 Slide the supply roll retainer up to the edge of the fanfold media and
turn the supply roll retainer clockwise until it locks firmly in place
securing the media against the inside wall of the printer.
9 Engage the printhead by rotating the head lift lever counterclockwise
until it locks.
10 Close the printer by reversing the directions for removing the cover.
11 Press Feed/Pause to advance one label through the printer and out the
label opening in the front cover. The printer is now ready to print the
configuration test label. The yellow Empty/Pause LED goes out.
If the yellow Empty/Pause LED does not go out, press Feed/Pause a
second time and then reload the media and try again if the Empty/Pause
LED still does not go out.
Note: For your convenience, refer to the label with directions for loading
media. This label is located on the inside of the media cover.
Printing the Hardware Configuration Test Label
You can print the hardware configuration test label to test the printer and
make sure it is operating correctly. The hardware configuration test label
lists the printer’s configuration. Use this label for reference when installing
your printer and for verification of proper printer operation.
To print the hardware configuration test label
1 Turn the On/Off switch to the off position.
2 Press and hold the Feed/Pause button while you turn the On/Off switch
to the on position. The Alert and Empty/Pause LEDs blink during the
printer self-test.
3 Release the Feed/Pause button when the media starts moving. The
printer feeds out one or two blank labels and then prints the hardware
configuration test label.
Note: This is only an example of a hardware configuration label. Your
label may not be exactly the same.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
7
Chapter 1— Getting Started
3440 Hardware Configuration
Memory Installed
Storage RAM
Image RAM
Flash RAM
Mileage
Inches Processed
Inches Burned
Labels Cut
Printhead
Width
Dot Size
Burn Pot Setting
Hardware Options
I/O Option
Internal Option
External Option
Firmware Checksum
ROM0 (U21)
ROM1 (U9)
Program
Version
: 256 kilobytes
: 583 kilobytes
: none
:0
:0
:0
: 1792 dots
: 2.5 mil
: 156
: none
: none
: none
:
:
:
:
95D0
7331
062933
0.a
3XXXU.007
4 Turn the printer power off and then on. You are now ready to connect
your 3400, 3440, or 3600 printer to your system.
What the Hardware Configuration Test Label Tells You
The hardware test label provides these statistics:
• Amount of installed memory
• Amount of media printed
• Printhead configuration
• Firmware information
• Printhead alignment (the vertical lines)
If a Hardware Configuration Test Label Does Not Print
If you are unable to print a hardware configuration test label, see “Printer
Operation Problems” on page 42.
Connecting the Printer to Your System
You can connect your printer to a PC, a local area network, an AS/400 (or
other midrange computer), or a mainframe. This section tells you how to
connect your printer to any of these systems.
This illustration shows you where to connect your system to the printer.
You can use either of these two ports on the rear of the printer:
• Serial communications port
• I/O board port (if you have an adapter card installed)
8
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 1— Getting Started
1 2 3 4 5 6 7 8
Optional I/O
board port
1 2 3 4 5 6 7 8
I
Serial
communications
port
O
3XXXU.008
Printer ports: This illustration shows you where to connect your system to the printer.
Connecting Your Printer to a PC
You can connect your printer to either a serial port or parallel port (if you
have the option installed) on your PC. You must provide the correct cables
for connecting the printer. See the following sections for cable
information. Contact your Intermec representative for ordering assistance
if you do not have the appropriate cables.
Connecting the Printer to a PC Serial Port
To connect the printer to your PC serial port, you need a shielded EIA
RS-232, RS-422, or RS-485 electrical interface with a 25-pin D-style
subminiature connector. It must have pins on the printer end and an
appropriate serial port connector on the other end.
To connect to an IBM PC, you can use these Intermec cables:
• 25-pin printer to 25-pin serial port null modem (P/N 048668)
• 25-pin printer to 9-pin serial port null modem (P/N 048693)
You cannot order an Intermec cable for the RS-422 interface, but there is a
schematic on page 101 that you can use to purchase or make your own
cable. Also see Appendix C for the RS-232, RS-422, and RS-485 serial
port pin assignments.
To connect your printer to a PC serial port
1 Turn the On/Off switch to the off position.
2 Plug the 25-pin connector into the serial communications port on the
rear of the printer.
3 Plug the other end of the cable into a serial (COM) port on the PC.
4 If necessary, change the PC serial port configuration to match your
printer. See “Configuring the Serial Port for Communications” on page
11. for more information.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
9
Chapter 1— Getting Started
Connecting the Printer to a PC Parallel Port
If you are using a parallel port to communicate with your printer, you
need a parallel cable to run between the printer and the PC.
You can purchase a parallel cable from Intermec (P/N 051211) or from
your local computer store. See “Parallel Interface Pin Descriptions” on
page 80 for pin descriptions of the parallel cable connector.
To connect your printer to a PC parallel port
1 Turn the On/Off switch to the off position.
2 Plug the parallel interface connector into the parallel communications
port on the rear of the printer.
3 Plug the other end of the cable into a parallel port on the PC.
Connecting Your Printer to a Network
You can connect the printer to Novell NetWare networks, Token Ring
networks, or other TCP/IP networks. To connect the printer to a network,
you must have a network interface adapter (for example, Ethernet). For
more information about network interface adapters, see “Communication
Interface” on page 79. Your network must be able to use XON/XOFF
(software and hardware flow control) protocol.
If you need to change the printer’s communications parameters, follow the
procedures in “Configuring the Serial Port for Communications” on
page 11.
Connecting the Printer to an AS/400
To connect a printer directly to an AS/400 or midrange computer, you
need:
• a twinax adapter card.
• a twinaxial cable equivalent to IBM part number 7362267 or 7362062.
The maximum cable length for the twinax interface is 1,525 meters
(5,000 feet).
If you did not have the twinax card installed at the factory, a field service
technician can install the field installable option (P/N 056835) in the
optional I/O board port of your printer.
For help on cabling and communications, see the manual that comes with
the twinax adapter card.
Note: If you are using a midrange computer other than the AS/400, refer
to your system documentation for information on cabling and setting up
communications.
10
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 1— Getting Started
Connecting the Printer to a Mainframe
To connect the printer directly to an IBM mainframe, you need:
• a coax adapter card.
• a coaxial cable equivalent to IBM part number 2577672 or 1833108.
The maximum cable length allowed is 1,500 meters (4,920 feet). See the
IBM specification Installation and Assembly of Coaxial Cable and Accessories,
part number GA27-2805-4, for further information.
If you did not have the coax card installed at the factory, a field service
technician can install the field installable option (P/N 056836) in the I/O
board port of your printer.
For help on cabling and communications, see the manual that comes with
your coax adapter card.
Cabling in Noisy Electrical Environments
The items listed below create noisy electrical environments that can
disrupt data communications between your host computer and the printer:
• Large power transformers
• Large electrical motors
• Arc welders
• Motor controllers
• Switch gears
If any of these items are near your printer, you may want to try the
following suggestions to reduce the effects of electrical noise:
• Always use shielded cable. Connect the cable and shield to the metal
backshells on the cable connectors and fasten the connectors to the serial
ports using screws.
• Install ferrite cable clamps.
• Connect the printer chassis ground to the building ground. You will
find the chassis ground on the ground pin of the printer power cord.
If you need help eliminating noise, ask your Intermec representative for
assistance.
Configuring the Serial Port for Communications
You need to configure the serial port of the printer to match the
configuration of your PC or network controlling device. If the printer’s
default settings do not match, use the DIP switch settings table to
configure the serial port.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
11
Chapter 1— Getting Started
To configure the printer serial port
1 Use the following DIP switch setting descriptions and table to locate the
DIP switches you need to change to configure the serial port.
2 Use a small straight-slot screwdriver to set the appropriate DIP switches.
For example, if you want to change the media type to thermal transfer,
set DIP switch 8 on the bottom bank of switches to the on position.
3 Turn the printer power off and then on for the configuration changes to
take effect.
Note: Ignore Multi-Drop switches if you are not using a Multi-Drop
network.
DIP Switch Setting Descriptions
Parameter
Baud rate
Description
The rate, in bits per second, at which the host exchanges
data with the printer.
Parity
Adds one bit (1 or 0) to the character to make the sum of
bits always odd or even.
Data bits
The number of bits that represent the ASCII characters.
Stop bits
Timing units between characters that synchronize character
transmission.
Multi-Drop address
Unique address for each device connected with Multi-Drop
protocol.
Protocol
The transmission standards for communication between the
printer and each connecting device.
Media type
Enables the printer to work with either direct thermal or
thermal transfer media.
The following table provides the maximum baud rates for the printers.
Maximum Printer Baud Rates
12
Printer
3400A
Maximum Baud Rate
19,200
3400B
19,200
3400C
38,400
3400D
38,400
3440
57,600
3600
19,200
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 1— Getting Started
Bottom Bank Switch Number
Top Bank Switch Number
OFF
O = OFF
1 = ON
ON
Baud Rate Selection
19,200
9,600*
4,800
2,400
1,200
38,400
57,600
reserved
Parity Selection
Even*
Odd
None
None
Number of Data Bits
7 Bit*
8 Bit
Reserved
OFF
1
O
1
O
1
O
1
O
1
2
O
O
1
1
O
O
1
1
3
4
5
6
7
8
O
O
O
O
1
1
1
1
O = OFF
1 = ON
ON
Multi-Drop Address Selection
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0
1
2
3
4
5
*
O O
1 O
O 1
1 1
O
1
O O
Default settings are noted with an *
Protocol Selection
XON/XOFF
Intermec Protocols
*
XON/XOFF Selection
No Status Response
With Status Response
*
1
2
3
4
5
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
O
O
1
1
1
1
O
O
O
O
1
1
1
1
O
O
O
O
1
1
1
1
O
O
O
O
1
1
1
1
O
O
O
O
O
O
O
O
1
1
1
1
1
1
1
1
O
O
O
O
O
O
O
O
1
1
1
1
1
1
1
1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
7
O
1
O
1
Media Type
Direct Thermal
Thermal Transfer Ribbon
*
Default settings are noted with an *
8
O
1
3XXXU.020
DIP switch settings: These charts illustrate the settings for the DIP switches on the top
and bottom banks. For a description of each setting, see the DIP Switch Settings
Descriptions table on page 12.
Verifying Printer Communications With Your System
After connecting the printer to your system, you need to test
communications. The easiest way to test communications is to set the
printer to Data Line Print mode, which is part of Test and Service mode,
and send a character string down from your system.
To verify communications with your system
1 If you have just printed a configuration test label, you are already in
Data Line Print mode. Start the following procedure with Step 5.
2 Turn the On/Off switch to the off position.
3 Press and hold the Feed/Pause button while you turn the On/Off switch
to the on position. The printer prints the hardware configuration test
label.
4 Release the Feed/Pause button. You are now in Data Line Print mode.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
13
Chapter 1— Getting Started
5 Transmit at least four characters from your system.
At this point, the printer does not attempt to interpret any printer
commands, but simply prints each character with its hexadecimal
equivalent underneath.
Note: An example of using DOS to verify printer communications
follows this procedure.
6 To enter normal Print mode, turn the printer power off and then on
again.
If this procedure does not work, make sure that the DIP switches match
the serial port configuration of the system and that you have the printer
cable securely plugged into the correct port of your system.
If you receive a write fault error, your cabling may not be correct. See
“Connecting the Printer to Your System” on page 8 for more information.
Note: Please refer to your host computer user’s manual and the IPL
Programming Reference Manual (P/N 066396) for information on
downloading commands.
Example: Using DOS to Verify Printer Communications
1 At the DOS prompt, type this command and press Enter:
MODE COM1 96,E,7,1,N
2 Type these command lines and press Enter:
COPY CON COM1
ABCDEF^Z
where:
COPY CON COM1 has the PC copy the following information to the
COM1 port.
ABCDEF are random characters entered at the host.
^Z (Ctrl-Z) Enter sends the information to the printer.
The printer will print these characters:
3XXXU.021
Note: If you are using a different platform to communicate with your
printer, please refer to your host computer user’s manual and the IPL
Programming Reference Manual (P/N 066396) for help downloading
commands.
14
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
2
Operating the Printer
Use this chapter to understand how to use the printer front panel, load roll
media and media for self-strip printing, set the media sensitivity number,
and communicate with the printer. This chapter covers these topics:
• Understanding the front panel
• Loading roll media and media
• Loading thermal transfer ribbon
• Setting the media sensitivity number
• Communicating with the printer
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
15
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
Learning How to Operate the Printer
To operate the printer, you need to understand:
• how light emitting diodes (LEDs) help you monitor the status of the
printer and the various tasks the Feed/Pause button performs.
• how to load roll media, thermal transfer ribbon, and the procedure for
using the self-strip option.
• how to optimize print quality and print speed.
• the different methods for transferring information from the host to the
printer and from the printer to the host.
Understanding the Front Panel
Use this section to understand the function of the front panel LEDs and
the Feed/Pause button.
Power/Data
Alert
Empty/Pause
Feed/Pause
3XXXU.024
Front panel: This illustration shows the front panel LEDs and the Feed/Pause button.
Understanding the Front Panel LEDs
You can use the front panel LEDs to monitor the status of the printer and
troubleshoot the printer.
16
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
LED
Power/Data
Power/Data
Green LED
Orange LED
State
Off
On
Flashing
Indication
Power off
Power on
Receiving data
Alert
Off
Flashing
On
Printing or idle
Over-temperature
System fault
Empty/Pause
Off
Flashing
On
Printing or idle
Paused
Media fault
Alert
Yellow LED
Empty/Pause
Feed/Pause
3XXXU.025
LED states: This illustration shows what each LED state indicates.
Note: The green LED on the 3600 printer front panel reads Power. It
does not flash to indicate receiving data.
LED States for Problems
Problem
Over-Temperature
LED State
If the printer overheats, the Alert flashes and the printer stops. Do
not try to troubleshoot or adjust the printer—just allow the printer
enough time to cool down and it will resume operation on its own.
Media or System
Faults
If the Empty/Pause or the Alert LED remains on, your printer is
experiencing a media or system fault. For help, see Chapter 4,
“Troubleshooting.”
Using the Feed/Pause Button
The Feed/Pause button, located on the front of the printer, performs
several functions depending on the mode of the printer.
Feed/Pause Button Functions
Printer
Mode
Idle
Printing
You Want To
Feed out one label or
a minimum specified
amount of media.
What to Do
Press and release the Feed/Pause button.
Continuously feed
media.
Press and hold the Feed/Pause button. When
you release the button, the media stops feeding.
Take the printer
offline.
Press the Feed/Pause button twice. Press the
button again to bring the printer online.
Pause the printer.
Press and release the Feed/Pause button. Press
and release the button again to resume printing.
Cancel the current
print job.
Press and hold the Feed/Pause button until the
printer stops printing.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
17
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
Feed/Pause Button Functions (continued)
Printer Mode
Turned on for
the first time
You Want To
Print the hardware
configuration label.
What to Do
Press and hold the Feed/Pause
button. See “Printing the Hardware
Configuration Test Label” on page 7 for
more information.
Loading Media Into the Printer
You can load media into the printer in three different ways:
• Straight-through printing with roll media
• Self-strip printing with roll media
• Fanfold printing (See “Loading Media for Fanfold Printing” on page 5.)
You can load media with the printer power turned on or off. The
following procedures for loading media assume that you have turned the
printer on
Loading Roll Media for Straight-Through Printing
In straight-through printing, you load a roll of media on the supply roll
post and feed it straight through the printer mechanism and out the front
of the printer. As the printer completes the printing of individual labels,
you can remove them from the roll by pulling them down across the tear
bar.
Note: You should find a small label with a three-digit sensitivity number
printed on it attached to your roll of media or a 15-digit number stamped
on the side of the media roll. Save this information. You will need it to set
the correct media sensitivity number. For help, see “Setting the Media
Sensitivity Number” on page 25.
The next instructions cover how to load media for straight-through print
mode using a roll of direct thermal or thermal transfer label media. The
default setting for the printer is direct thermal mode; use PrintSet to
change the printer to thermal transfer mode.
To load the media
1 Raise the printhead by rotating the head lift lever clockwise until the
printhead disengages.
2 Turn the supply roll retainer counterclockwise to release it and then
slide it to the outer end of the supply roll post.
18
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
If you are replacing the empty media roll with a new roll of the same
width, you do not need to adjust the edge guide or the supply roll
retainer.
3 Place the media roll on the supply roll post and position it firmly against
the printer.
If you are using a narrow roll of media, less than 7.62 centimeters
(3 inches), insert the media support between the roll of media and the
supply roll retainer before securing it.
Note: The 3600 printer does not require the use of the media support.
Upper
media guide
Head lift
lever
Media
Media roll
Media
backing
Supply roll
post
Supply roll
retainer
Media
support
Edge
guide
Lower
media guide
3XXXU.026
4 Slide the supply roll retainer up to the edge of the media roll and turn
the supply roll retainer clockwise to secure.
5 Pull down on the lower media guide to allow easy access to the media
path. Make sure that the edge guide slides all the way to the outer edge
of the lower media guide.
6 Insert the label stock through the printer mechanism as shown. Make
sure the label passes between the upper and lower media guides. The
front edge of the media should pass over the tear bar and out the front
of the printer.
7 Release the lower media guide and adjust the edge guide to position the
media firmly against the inside wall of the printer.
If you are using thermal transfer media, refer to “Loading Thermal
Transfer Ribbon” on page 22 before you finish performing this
procedure.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
19
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
8 Lower the printhead by rotating the head lift lever counterclockwise
until it locks.
9 Use PrintSet, your third-party software, or the IPL command set to
configure the printer for the kind of media you are using (continuous or
mark label). Refer to the PrintSet online help, your third-party
documentation, or the IPL Programming Reference Manual (P/N
066396) for help.
10 Press Feed/Pause to advance several inches of media through the printer
and out the label opening in the front cover. Your printer is now ready
to print labels.
Note: Refer to the label located on the inside of the media cover for
directions on loading media. For your convenience, you may want to refer
to it when loading media in the future.
Loading Media for Self-Strip Printing
Use self-strip printing in applications where you want to apply labels to a
surface immediately. After printing a label, the printer prints out the label
with the backing removed. The rewinder hub collects the backing after it
passes over the self-strip assist roller. The rewinder hub can hold the
backing from an entire roll of media.
For the 3400C printer, self-strip printing is an option that you order with
your printer. Self-strip printing is standard on the 3400B.
Note: You should find a small label with a three-digit sensitivity number
printed on it attached to your roll of media or a 15-digit number stamped
on the side of the media roll. Save this information. You will need it to set
the correct media sensitivity number. For help, see “Setting the Media
Sensitivity Number” on page 25.
To load self-strip media
1 Raise the printhead by rotating the head lift lever clockwise until the
printhead disengages.
2 Turn the supply roll retainer counterclockwise to release it and slide it
to the outer end of the supply roll post. Turn it clockwise to lock it in
place.
3 Place the media roll on the supply roll post and position it firmly against
the inside wall of the printer.
4 Turn the supply roll retainer counterclockwise and slide it up to the
edge of the media roll. Turn the supply roll retainer clockwise to secure.
20
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
If you are using a narrow roll of media, less than 7.62 centimeters
(3 inches), insert the media support between the roll of media and the
supply roll retainer before securing it.
Note: The 3600 printer does not require the use of the media support.
Media roll
Po
Supply roll
retainer
Supply roll
post
we
r/D
Ale
ata
➤
rt
Em
pty
/P
au
se
Fe
ed
/P
au
se
Inte
rm
34 ec
40
Media
support
➤
➤
Media
liner
➤
➤
➤
Lower media
guide
Upper
media
guide
Edge
guide
Media
access door
Self-strip
assist roller
Rewinder
hub
Rewinder
clasp
Head lift
lever
3XXXU.027
5 Unscrew the edge guide and slide it to the outer edge of the lower media
guide. Screw it in place.
If you are replacing the empty media roll with a new roll of the same
width, you do not need to adjust the edge guide.
6 Pull down on the lower media guide to allow easy access to the media
path.
7 Unroll several inches of media, insert it between the upper media guide
and the lower media guide, and out the front of the printer.
8 Release the lower media guide and adjust the edge guide to position the
media firmly against the inside wall of the printer.
9 Pull out 25.4 to 30.48 centimeters (10 to 12 inches) of media and
remove the exposed labels from the media liner.
10 Open the media access door and thread the media liner under the selfstrip assist roller and over the rewinder hub in a clockwise direction.
11 Remove the clasp from the rewinder hub and wind approximately 5.08
centimeters (2 inches) of media liner clockwise over the rewinder hub.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
21
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
12 Secure the media to the rewinder hub by snapping the rewinder clasp
onto the rewinder hub. Turn the rewinder hub clockwise to remove all
slack from the media liner between the tear bar and the rewinder hub.
13 Close the media access door.
14 Rotate the head lift lever counterclockwise until it locks.
15 Use PrintSet, your third-party software, or the IPL command set to
enable self-strip and the label taken sensor. Refer to the PrintSet online
help, your third-party documentation, or the IPL Programming
Reference Manual (P/N 066396) for help.
16 Press the Feed/Pause button to advance a label through the printer.
Grasp the leading edge of the label where it has separated from the
backing and pull it away from the printer.
17 Replace the printer cover. The printer is now ready to print labels.
Loading Thermal Transfer Ribbon
If you plan to use thermal transfer mode, you must install a thermal
transfer ribbon (TTR) to print in thermal transfer mode.
Note: Save the packaging that your ribbon came in. Attached to the
ribbon packaging is a small label with a three-digit sensitivity number
printed on it. You need this information to set the correct media sensitivity
number. Refer to the next section, “Setting the Media Sensitivity
Number,” for more information.
If you have a 3400 printer, the core of your thermal transfer ribbon is
either made of cardboard or plastic. You need to use the correct corelocking brackets for your ribbon core. The printer ships from the factory
with the cardboard core-locking brackets already attached. However, the
plastic core-locking brackets are included in the shipping contents.
Note: If you do not use the correct core-locking brackets, you may
experience printing problems or possible damage to the printer.
To change the cardboard core-locking brackets to plastic core-locking brackets
1 Pull up on the middle of the cardboard core-locking bracket (P/N
065375), while pushing down on one end with your index finger, until
the end of the bracket is free of the ribbon hub.
22
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
Core-locking
bracket
44XXU029.eps
Bracket slot
2 Remove the other end of the bracket from the ribbon hub.
3 Slide one end of the plastic core-locking bracket (P/N 066792) into a
bracket slot on the ribbon hub.
4 Lift up on the middle of the bracket and use your index finger to slide
the other end of the bracket into the remaining bracket slot on the
ribbon hub.
To load thermal transfer ribbon
1 Raise the printhead by rotating the head lift lever clockwise until the
printhead disengages.
2 Place the empty ribbon core that came with the printer onto the ribbon
rewind hub.
3 Detach the leader from the new thermal transfer ribbon roll and unwind
the end of the ribbon approximately 20.32 centimeters (8 inches). The
edge of the ribbon has a leader (with an adhesive strip on the leader
edge) for guiding the ribbon through the printhead mechanism.
4 Slide the roll of thermal transfer ribbon onto the ribbon supply hub
with the ribbon roll winding clockwise.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
23
C d
Chapter 2— Operating the Printer
Thermal transfer
ribbon
39 Helvetica CondensedHelvetica
Empty ribbon
hub
Po
we
r/D
ata
Ale
rt
Em
pty
/P
au
se
Fe
ed
/P
au
se
Inte
rme
34
c
40
TTR assist
roller
Printhead
Ribbon supply
hub
Upper media
guide
Ribbon rewind
hub
Head
3XXXU.028
lift lever
5 Route the ribbon leader through the printer mechanism as shown in the
above illustration.
Make sure the ribbon runs above the upper media guide. The shiny side
of the ribbon must come in contact with the printhead.
6 Attach the leader from the new thermal transfer ribbon roll to the
empty ribbon core using the adhesive strip on the leader edge.
7 Wind the ribbon rewind hub clockwise until the ribbon runs smoothly
through the printhead mechanism and the leader moves past the
printhead.
8 Rotate the head lift lever counterclockwise until it locks.
9 Enable thermal transfer printing by setting DIP switch 8 on the bottom
bank of switches to the on position. For help, see “Configuring the
Serial Port for Communications” on page 11.
10 Press the Feed/Pause button to advance the ribbon through the printer.
11 Close the printer. The printer is now ready to print.
Note: When replacing the thermal transfer ribbon roll in the future, use
the empty ribbon supply core as the new rewinder core.
24
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
Setting the Media Sensitivity Number
Media sensitivity is important because you use it to optimize print quality
and print speed. The three-digit media sensitivity number (MSN) specifies
the amount of heat required by the printhead to image a label. The
amount of heat that each roll of media or ribbon requires is unique due to
different chemistries and manufacturing processes. Intermec has developed
heating schedules (the amount of heat required to image a label) to
produce the highest possible print quality for Intermec media and ribbon
combinations on Intermec printers.
Look for the three-digit media sensitivity number on:
• the side of the media roll. Use the last three digits (140 in the example)
of the 15-digit number stamped on the roll for the media sensitivity
number.
• a small label attached to the roll of media.
• a small label attached to the plastic bag of your ribbon roll. Your label
may be different than this example, but it will contain the sensitivity
number.
120066102605140
SENSITIVITY NUMBER
120066102605140
5✩7
3XXXU.029
Media sensitivity number: This illustration shows you where to find the media
sensitivity number. Note that some ribbon rolls have the media sensitivity number
printed inside of the core.
Use this three-digit number to optimize print quality and print speed on
your printer. You can achieve the best print quality on the printer by using
only Intermec ribbon and media products. The default sensitivity setting
for thermal transfer media is 567. For direct thermal media, the default
sensitivity setting is 420.
Use the PrintSet software, your third-party software, or the IPL command
set to change the media sensitivity number. If you want to see the current
sensitivity setting of your printer, print out a software configuration label.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
25
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
To print a software configuration label
1 Turn the On/Off switch to the off position.
2 Press and hold the Feed/Pause button while turning the printer on. The
printer prints out a hardware configuration label.
3 Set the DIP switches to print out the software test label.
Top Bank
Set switches 1 through 6 and 8 off. Set switch 7 on.
Bottom Bank
Set switches 1 through 8 off.
4 Hold the Feed/Pause button down for 1 second. The printer prints out
the software configuration label.
5 Return the DIP switches to their original settings.
6 Turn the printer power off and then on.
Setting the MSN for Intermec Media and Ribbon
For direct thermal media, use the three-digit sensitivity number located on
the roll of media to set the sensitivity number. You can also use the values
from the tables in the next section.
For thermal transfer media, you need to look in two places to determine
the sensitivity number. The sensitivity number on each roll of thermal
transfer media or ribbon has an asterisk (*) in place of one of the digits.
On thermal transfer media, the rating contains the first and second digits,
with an asterisk in place of the third digit. The number on the ribbon has
the first and third digits, with an asterisk in place of the second digit.
To optimize the sensitivity number for thermal transfer media, you
combine the digits as in this example.
Example: Optimizing the Sensitivity Number
Media or Ribbon
Thermal transfer media
Sensitivity
Number
56*
Thermal transfer ribbon
5*7
The asterisk reserves the second digit to
identify the media’s sensitivity number.
567
Optimized sensitivity number
Description
The asterisk reserves the third digit to
identify the ribbon’s sensitivity number.
Setting the MSN for Other Media and Ribbon
If you are not using Intermec media and ribbon, or you misplaced your
packaging with the three-digit sensitivity number label on it, you can set
the approximate sensitivity number. The first column of the Direct
Thermal and Thermal Transfer Media Sensitivity Settings tables list the
26
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
approximate sensitivity settings. To achieve acceptable print quality, enter
the three-digit media sensitivity number (for example, 800).
If you are unsure of how to set the media sensitivity number, start with the
highest setting, which provides the lowest energy (800 for thermal transfer
and 700 for direct thermal), and work your way down until you achieve
the best print quality.
Direct Thermal Media Sensitivity Settings
Approximate
Sensitivity
Numbers
700 Series High
Sensitivity
400 Series
Medium
Sensitivity
100 Series Low
Sensitivity
800 Series High
Sensitivity (Paper)
600 Series
Medium
Sensitivity (Paper)
Sensitivity
Setting
720
Direct Thermal Media
Duratherm Lightning
Plus - 2
Maximum
Recommended
Print Speed
8
480
Duratherm Lightning
IR Tag
5
470
Duratherm Lightning - 1
5
460
European IR
5
450
Duratherm Lightning
IR Labels - 1
5
440
European Thermal
5
420
Duratherm Lightning
Labels - 1
5
180
Duratherm II - 1
3
170
European Tag
3
160
Duratherm II Tag
3
140
European Top
3
130
Duratherm II - 2
3
864
European
Uncoated/Standard - 1
8
854
Duratran TTR Paper
Labels/Standard - 1
6
834
Duratran TTR Paper
Tags/Standard - 1
6
687
Duratran TTR Polyester
1/Premium - 7
6
677
Duratran Syntran/
Premium - 7
6
633
European
Polyethelene/Premium
8
627
Duratran
Kimdura/Premium - 7
8
623
Duratran
Kimdura/Premium
6
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
27
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
Thermal Transfer Media and Ribbon Sensitivity Settings
Approximate
Sensitivity
Numbers
500 Series
Medium
Sensitivity (Paper)
300 Series Low
Sensitivity
(Plastic)
200 Series Low
Sensitivity
(Kapton)
Sensitivity
Setting
567
Direct Thermal Media
Duratran II-1/Premium - 7
Maximum
Recommended
Print Speed
8
565
European Premium
Paper/Premium
4
563
Duratran II-1/Premium
7
533
European Tag/Premium
6
527
Duratran II Tag - 7
mil/Premium - 7
6
513
European Coated/Premium
6
369
Super Premium Poly./Super
Premium - 3
5
366
Super Premium Poly./Super
Premium - 7
5
238
Gloss Polyimide
(Kapton)/Gloss Super
Premium
3
236
Gloss Polyimide
(Kapton)/Super Premium-7
3
226
Matte Polyimide
(Kapton)/Super Premium-7
3
222
Matte Polyimide
(Kapton)/Matte Super
Premium
3
Communicating With the Printer
You are now ready to print labels by downloading data from the host to
the printer. Downloading is the universal term used to describe the transfer
of information from the host to any connected peripheral device, such as
your printer. When you transfer data from your printer to the PC or host,
you are performing a process called uploading.
You can use several methods to download information in your data
collection system. The next sections describe different ways to
communicate with the printer.
28
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C d
39 Helvetica CondensedHelvetica Chapter 2— Operating the Printer
Using the PrintSet Software
Use the PrintSet application software to easily configure your printer from
your PC. You can upload the current configuration settings, modify them,
and then download them to your printer. PrintSet also lets you:
• download graphics and fonts.
• print test labels using resident fonts, user-defined bitmap graphics, or
resident bar code symbologies.
• allocate printer memory.
• download configuration files to multiple printers.
For help using PrintSet, refer to the online help portion of the application
software.
Using Third-Party Software
You can use third-party software to set many of the printer parameters.
You can configure the parameters that your software does not set by using
the printer command set or the configuration DIP switches.
Use your third-party software to create label formats and convert graphics
into a user-defined character (UDC) format that the printer can interpret.
Refer to your third-party documentation and the IPL Programming
Reference Manual (P/N 066396) for more information.
Using Intermec Printer Language (IPL) Commands
You can create labels by downloading formats (designs) and data with IPL
commands. You can use the printer to perform any function or activate
any feature of the printer except for those features or functions that you set
with the DIP switches. See the IPL Programming Reference Manual (P/N
066396) for more information.
Printing a Test Label
If you would like to test your communications by downloading a label,
follow the example below. Use the PrintSet application software to send a
test label to the printer. This example assumes that you have your printer
connected to a PC.
To print the test label
1 Start PrintSet on your PC.
2 From the Options menu, choose Test Print.
3 Select the Test Label option button.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
29
Chapter 2— Operating the Printer
C d
39 Helvetica CondensedHelvetica
4 Select either the Text or the Bar Code option button.
If you select to print text, you can choose any font in the Select Printer
Font list box.
If you select to print a bar code, you can choose any symbology in the
Select Symbology list box.
5 Choose Print. Your attached printer prints a test label.
For example, if you chose to print a bar code with the Code 39
symbology, your printer prints a label similar to this one:
*0123456789*
*0123456789*
*0123456789*
*0123456789*
3XXXU.030
30
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
3
Maintaining the Printer
This chapter explains how to clean and maintain the printer. Even though
the printer can withstand harsh environments, you must clean it on a
regular basis to maximize performance. It is very important to perform the
maintenance procedures if you expose the printer to dirt or debris. This
chapter covers these topics:
• Inspecting the printer
• Tools for cleaning the printer
• Maintenance schedule
• Cleaning the printhead
• Cleaning the printer covers
• Cleaning the drive roller and tear bar
• Cleaning the media guides and media path
• Cleaning the label sensors
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
31
Chapter 3— Maintaining the Printer
Inspecting the Printer
Inspect the printer and the rest of your data collection system equipment
on a regular basis:
• Make sure you have properly grounded the printer.
• Inspect the work environment. Large electric motors, welders, and
switching equipment can affect printer performance.
• Keep the printer away from liquids.
• Check the data collection network regularly for loose wires or poorly
installed connections. Be sure to replace corroded wires.
Tools for Cleaning the Printer
To clean the printer safely and effectively, use the following items:
• Isopropyl alcohol
• Cotton swabs
• Clean lint-free cloth
• Vacuum cleaner
• Soapy water/mild detergent
• Cleaning card (P/N 1-110501-00)
The following procedures explain how to access the printer parts and clean
them without causing any harm to the printer or yourself.
Maintenance Schedule
Clean your printer regularly to maintain the quality of your labels and
extend the life of your printer. This table contains suggestions for cleaning
the printer. Use the illustration to locate the parts you need to clean.
Printer Maintenance Schedule
32
Printer Component
Printhead
Maintenance Period
Inspect after every roll of media or ribbon. Clean
after every roll, or 152 meters (6,000 inches), of
media or more often if necessary.
Printer Cover
Clean as necessary.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 3— Maintaining the Printer
Printer Maintenance Schedule (continued)
Printer Component
Drive roller and tear bar
Maintenance Period
Clean after every five rolls of media. If you are
using hi-tack adhesive, you must clean after every
roll of media. If you are using tag stock or
continuous media, you may want to clean after
every five rolls of media or as necessary. Clean
more often in environments that are harsh or
dusty.
Media path (not shown)
Edge guide
Upper media guide
Lower media guide
Thermal transfer ribbon
(TTR) assist roller
Self-strip roller
Label gap sensor (not shown)
Label mark sensor (not shown)
Label taken sensor
Pinch roller
TTR assist
roller
Po
we
r/D
ata
Ale
rt
Em
pty
/P
au
se
Fe
ed
Label taken
sensor
/P
au
se
Inte
rme
c
34
40
Tear bar
Upper media
guide
Drive
roller
Pinch
roller
Thermal
Self-strip printhead
roller
Lower media
Edge guide
guide
3XXXU.032
Printer parts: This illustration shows the printer parts that need to be cleaned. For a
maintenance schedule of each part, see the Printer Maintenance Schedule table on
pages 32-33.
Switch off the printer power and remove the power cord before
cleaning any part of the printer.
Avertissement: Mettez l’imprimante hors tension et débranchez le
câble d’alimentation avant de nettoyer une parte de l’imprimante.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
33
Chapter 3— Maintaining the Printer
Cleaning the Printhead
In order for the printhead to provide good print quality, it must maintain
close contact with the media. Therefore, cleaning media debris from the
printhead is very important. Clean after every roll, or 152 meters (6,000
inches), of media or when necessary. There are two ways to clean the
printhead:
• Use the cleaning card.
• Use a cotton swab and isopropyl alcohol.
Do not use sharp objects such as knives or screwdrivers to scrape the
printhead clean. Cleaning with sharp objects will damage the
printhead. Clean with only a cotton swab, or a clean, lint-free cloth or
tissue damp with isopropyl alcohol.
Attention: N’utilisez pas d’objets pointus tels que couteaux ou
tournevis pour nettoyer la tête d’imprimante. Nettoyer avec des objets
pointus endommagera la tête d’imprimante. Nettoyez-la seulement
avec de la ouate ou avec un linge propre et libre de peluches, humecté
avec de l’alcool d’isopropyl.
To clean the printhead using the cleaning card
1 Turn off the printer and remove the power cord.
2 Remove the media cover.
3 Disengage the printhead by rotating the head lift lever clockwise until
the printhead releases. This raises the printhead so that you can clean it.
4 Remove the media and ribbon.
5 Open pouch and remove cleaning card.
6 Insert cleaning card into the printer following the media path.
Head lift
lever
Upper
media guide
Cleaning
card
Edge
guide
34
Lower
media guide
3XXXU031.eps
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 3— Maintaining the Printer
7 Engage the printhead by rotating the head lift lever counterclockwise
until it locks in place.
8 Use one hand to hold the printer and use the other hand to pull the
cleaning card forward until you have pulled the entire card through the
media path.
9 Repeat Steps 6 through 8.
10 Dispose of the cleaning card properly.
11 If you are finished cleaning, replace the media cover.
To clean the printhead using a cotton swab and isopropyl alcohol
1 Turn the On/Off switch to the off position and remove the power cord.
2 Remove the media cover.
3 Rotate the head lift lever clockwise until the printhead releases. Rotating
the head lift lever raises the printhead to allow for cleaning.
4 Remove the media and ribbon (if necessary).
5 Use a cotton swab moistened with alcohol to remove any dirt, adhesive,
or debris from the print surface on the bottom of the printhead.
Ribbon
supply
hub
Ribbon
rewind
hub
Supply
roll
post
Po
we
r/D
ata
Ale
rt
Em
pty
/P
au
se
Fe
ed
/P
au
se
Inte
rme
34
c
40
Head
lift
lever
Printhead
3XXXU.033
6 Wait 5 to 10 seconds for the print surface to dry. Replace the media and
ribbon.
7 Engage the printhead by rotating the head lift lever counterclockwise
until it locks in place.
8 If you are finished cleaning, replace the media cover.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
35
Chapter 3— Maintaining the Printer
Cleaning the Printer Covers
Use a general purpose cleaner (soapy water/mild detergent) to clean the
printer covers. Do not use abrasive cleansers or solvents. Be sure to clean
the transparent panel on the media cover so that the media supply inside
the printer is visible when you close the cover.
Cleaning the Drive Roller and Tear Bar
Cleaning the drive roller and tear bar preserves print quality by
maintaining close contact between the media and the printhead.
To clean the drive roller and tear bar
1 Turn the On/Off switch to the off position and remove the power cord.
2 Remove the media cover.
3 Rotate the head lift lever clockwise to release the printhead.
4 Remove the media and ribbon (if necessary).
5 Clean the drive roller by using a cloth dampened with isopropyl alcohol.
Move the cloth over the drive roller in a side-to-side motion as shown.
Make sure to rotate the roller so that you can clean all areas.
Note: Rotating the TTR assist roller toward you enables you to clean
the entire drive roller surface.
TTR assist
roller
Po
we
r/D
ata
Ale
rt
Em
pty
/P
au
s
e
Fe
ed
/P
au
se
Inte
A
Lit
rme
ton
Co
34
mp
c
an
y
00
Head lift
lever
Tear
bar
Drive
roller
3XXXU.034
6 Clean both sides of the tear bar with a cloth dampened with isopropyl
alcohol. Remove all traces of dust, paper, and adhesive.
7 Replace the media and ribbon.
36
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 3— Maintaining the Printer
8 Engage the printhead by turning the head lift lever counterclockwise
until the printhead locks.
9 If you are finished cleaning, replace the media cover.
Cleaning the Media Guides and Media Path
You should clean the media guides and media path regularly to keep debris
off the media surface and printhead where irregularities can spoil print
quality or damage the printhead. Cleaning the guides also prevents the
media from skewing or improperly tracking as it travels through the paper
path which can result in smeared images and print off the side of the label.
Always clean the media guides immediately after a label jam in the printer.
To clean the media guides and media path
1 Turn the On/Off switch to the off position and remove the power cord.
2 Remove the media cover.
3 Remove the media and ribbon (if necessary).
4 Pull down on the lower media guide to open up the media path.
Po
we
r/D
ata
Ale
rt
Em
pty
/P
au
se
Fe
ed
/P
au
se
Inte
rme
34
c
40
Upper media
guide
Lower
media
guide
Media
path
3XXXU.035
5 Use the cloth moistened with isopropyl alcohol to clean the upper and
lower media guides. Be sure to remove all traces of debris. Release the
lower media guide.
6 Remove all traces of dust, paper, and adhesive from the media path with
a soft bristle brush or vacuum.
7 Replace the media and ribbon.
8 If you are finished cleaning, replace the media cover.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
37
Chapter 3— Maintaining the Printer
Cleaning the Label Sensors
Three label sensors on the printer require regular cleaning:
• Label taken sensor
• Label mark sensor
• Label gap sensor
To clean the label sensors
1 Turn the On/Off switch to the off position and remove the power cord.
2 Remove the media cover.
3 Rotate the head lift lever clockwise to release the printhead. Rotating the
head lift lever raises the printhead to allow access to the label mark
sensor.
4 Remove the media and ribbon (if necessary).
5 Clean the label taken sensor with a cotton swab moistened with
isopropyl alcohol.
Cotton
swab
Label taken
sensor
Label mark
sensor
Drive
roller
Upper media
guide
(underside)
Cleaning
brush
Lower
media guide
Label gap
sensor
3XXXU.036
38
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 3— Maintaining the Printer
6 Pull down on the lower media guide to expose the label gap sensor.
Using a cleaning brush or vacuum, remove all debris and dust from the
label gap sensor.
7 Clean the label gap sensor with a cotton swab and alcohol.
8 Replace the media and ribbon.
9 Engage the printhead by rotating the head lift lever counterclockwise
until it locks in place.
10 Replace the media cover.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
39
Chapter 3— Maintaining the Printer
40
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
4
Troubleshooting
This chapter provides some hints for troubleshooting error messages that
the printer sends to the host and problems you may experience with the
printer.
• Troubleshooting checklist
• Printer operation problems
• Printer quality problems
• Communication problems
• Preventing data loss
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
41
Chapter 4— Troubleshooting
Troubleshooting Checklist
Even though Intermec designed your printer to operate under harsh
conditions, you may still encounter a printer operation, print quality, or
communication problem at some time. You can easily fix most of the
errors you encounter and consequently not delay operation of the printer
for very long.
To troubleshoot your printer
1 First try cleaning the printer components and checking all of the
connections. See Chapter 3, “Maintaining the Printer,” for details.
2 If cleaning the printer and checking the connections does not solve the
problem, use the following tables to locate the symptom. Follow the
solution in the table to fix your problem.
If you receive an error message, refer to your IPL Programming Reference
Manual (P/N 066396) for a complete list of error messages and their
solutions.
If the problem persists, contact your Intermec Customer Service
Representative (1-800-755-5505) from North America. If you are an
international customer, contact your local Intermec representative.
Printer Operation Problems
If your printer is not operating correctly, try locating the problem in the
table below:
Printer Operation Problems
Symptom
No power or loss of power.
Labels stop feeding
through the printer.
42
Possible Causes
The AC power cable is damaged or
disconnected.
Solution
Make sure the power cable is plugged in to
both the printer and an outlet or power strip.
Replace the cable if damaged.
Printer circuit breaker tripped.
Turn the printer off, and then back on again.
Printer is out of media.
Load new media. For help, see “Loading
Media Into the Printer” on page 18.
The label stock is loaded incorrectly.
Check the media path. For help, see “Loading
Media Into the Printer” on page 18.
The printer is set for continuous label
stock.
Use PrintSet to check the configuration
settings. If the settings are incorrect, use
PrintSet to change the settings.
Media is sticking to the paper path.
Clean any extraneous material from the paper
path and clean the path thoroughly. Refer to
Chapter 3, “Maintaining the Printer.”
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 4— Troubleshooting
Printer Operation Problems (continued)
Symptom
Printer slows down.
Possible Causes
The image bands or print speed is
incorrectly set.
Solution
Use PrintSet to change the image bands or
print speed settings.
The printer has aborted and reset the
print speed and image bands.
Use PrintSet to change the image bands or
print speed settings.
Labels stick to door or fail
to strip.
The self-strip roller is dirty.
Clean the self-strip roller. See Chapter 3,
“Maintaining the Printer.”
The Alert LED flashes and
printing stops.
Printhead has overheated.
Leave printer alone until it has time to cool
down. It will resume printing on its own.
Media fault.
The printhead is up.
Make sure the printhead is down. The head
lift lever should be straight up and down.
Press the Feed/Pause button to resume
printing.
Sensor type set incorrectly.
Configure the printer for the correct sensor
for the Print mode you are using. You can
enable self-strip and other Print modes
from PrintSet.
The media is incorrectly loaded.
Try reloading the media. For help, see
“Loading Media Into the Printer” on page
18.
The media is incorrectly loaded.
Try reloading the media. For help, see
“Loading Media Into the Printer” on page
18.
The printer is configured for self-strip
media.
Set the printer to the default configuration
using the DIP switches. For help, see
“Plugging In the Printer” on page 4.
Media fault.
Remove media from under the label taken
sensor.
Corrupt or incorrect information in
printer memory.
Reset the memory to return the printer to
its default configuration. For help, see
“Resetting the Memory on Your Printer”
on page 59. After you reset the memory,
power off the printer and return the DIP
switches to the required setting. For help,
see “Configuring the Serial Port for
Communications” on page 11.
Test configuration label
does not print.
Printer is not
communicating, not
printing, or not printing
properly.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
43
Chapter 4— Troubleshooting
Print Quality Problems
If your labels are not printing properly, check the following table to locate
the symptom and correct the problem.
Print Quality Problems
Symptom
Blotches printing on labels.
Possible Causes
Dirty printhead.
Solution
Clean the printhead. For help, see “Cleaning
the Printhead” on page 34.
Dirty media path or rollers.
Clean the media path. For help, see
“Cleaning the Media Guides and Media
Path” on page 37.
Poor quality label or ribbon stock.
Use only Intermec label and ribbon stock to
ensure superior print quality and product
performance.
Incorrect media sensitivity setting.
Change sensitivity setting to match the type
of media you are using. For help, see
“Setting the Media Sensitivity Number” on
page 18. If you set the sensitivity setting
correctly, try changing the dark adjust.
Incorrect darkness adjust control setting.
Adjust the knob to achieve the best print
quality. For help, see “Adjusting the Print
Darkness” on page 49.
Poor quality label or ribbon stock.
Use only Intermec label and ribbon stock to
ensure superior print quality and product
performance.
Dirty printhead.
Clean the printhead. For help, see “Cleaning
the Printhead” on page 34.
Printing not aligned on
label.
Printer is misfeeding media.
Make sure you have correctly installed the
media. For help, see “Loading Media Into
the Printer” on page 18.
Labels are not stopping at
the right point for removal.
Incorrect label rest point setting.
Adjust the label rest point. For help, see your
PrintSet online help or the IPL Programming
Reference Manual (P/N 066396).
Incorrect label stock setting.
Set the printer to thermal transfer or direct
thermal label stock. For help, see “Loading
Media Into the Printer” on page 18.
Incorrect media sensitivity setting.
Change sensitivity setting to match the type
of media you are using. If you set the
sensitivity setting incorrectly, try changing
the print darkness. For help, see your
PrintSet online help or the IPL Programming
Reference Manual (P/N 066396).
Incorrect darkness control setting.
Adjust the darkness adjust control. For help,
see “Adjusting the Print Darkness” on page
49.
Print speed exceeds the capability of the
media.
Lower your print speed or use Intermec
media recommended for your print speed.
Printing is too light or too
dark.
Print quality is poor.
44
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 4— Troubleshooting
Print Quality Problems (continued)
Symptom
Print quality is poor.
(continued)
Possible Causes
Printhead, platen roller, or label path are
dirty.
Solution
Clean printhead, platen roller, and label path
as described in Chapter 3, “Maintaining the
Printer.”
Uneven print contrast (density).
Adjust the bias adjust screw. See “Correcting
Uneven Print Quality” on page 48.
Poor quality label or ribbon stock.
Use only Intermec label and ribbon stock to
ensure superior print quality and product
performance.
Ribbon wrinkling.
Check to make sure that the ribbon is
installed correctly. For help, see “Loading
Thermal Transfer Ribbon” on page 18. Set
the bias adjust screw. See “Correcting
Uneven Print Quality” on page 48.
Ribbon installed upside down.
Install ribbon with shiny side facing the
printhead. See “Loading Thermal Transfer
Ribbon” on page 18.
Direct thermal/thermal transfer switch set
in the wrong position.
Set the switch for the type of media you are
using. For help, see “Loading Media Into the
Printer” on page 18.
Media may be slipping against the platen
roller causing the printing to compress.
Switch to approved media or clean the
printhead and platen roller as described in
Chapter 3, “Maintaining the Printer.”
The printer skips labels
randomly or sends an
intermittent error.
The label format extends beyond the label
length.
Edit the format to ensure that the text fits on
the label.
Continuous empty/pause
fault light (yellow LED).
The label mark sensor is not in the correct
position.
Properly position the label mark sensor. For
help, see “Adjusting the Label Mark Sensor”
on page 50.
Communication Problems
If your printer is not receiving downloaded data, try the solutions in the
accompanying table.
Communication Problems
Symptom
Printer does not
communicate with the host.
Possible Causes
Serial port is incorrectly configured.
Solution
Make sure the printer’s serial port settings
match those of the host. Print a software test
configuration label as described in Chapter 1
to check the serial port settings.
Damaged or incorrect I/O cable.
Check the connections at both ends or
replace the cable. See Appendix C for cable
information.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
45
Chapter 4— Troubleshooting
Several problems can cause data loss or communication problems on the
printer. Data loss can result in printing errors or missing field data.
Your printer is a serial ASCII device. It communicates with the host
through an ASCII serial communication I/O port. Hardware handshaking
involves the use of a hardware wire. Software handshaking involves a twoway datalink between the devices. The two devices communicate with each
other without losing data through the use of handshaking. The printer
sends both forms of handshaking simultaneously when the printer’s input
buffer is full. Any loss of data can cause printing errors.
Hardware handshaking uses pin 11 or pin 20 of the RS-232 interface to
control data flow. When the printer is using Intermec Standard protocol,
it holds pins 11 and 20 high when the printer is ready to receive data. The
printer holds the pins low when the printer is in one of the following
conditions:
• Buffer full
• Ribbon fault
• No label stock
• Label at strip bar
Your printer uses XON/XOFF protocol for software handshaking. When
the input buffer is full, the printer transmits an XOFF character. The
XOFF character alerts the host to the fact that the printer buffer is full and
cannot receive any more data. When the printer is ready to receive more
data, it sends the XON character.
The following procedure lists things to check to ensure that your printer
and host system are communicating properly.
To check for communication problems
1 Check the cabling from the printer to the host system.
2 Check the interfacing of the devices that are communicating with the
printer.
3 Check the printer for proper electrical operation of the I/O port.
4 Test to see that the host system is not overrunning the printer's input
buffers.
5 Check to see that the data string being sent to the printer contains the
correct information.
46
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
5
Optimizing Printer
Performance
This chapter explains how to optimize and maintain print quality, use the
printer memory more efficiently, and maximize throughput. This chapter
covers these topics:
• Optimizing and maintaining print quality
• Correcting uneven print quality
• Adjusting the print darkness
• Adjusting the label mark sensor
• Using the printer memory efficiently
• Increasing throughput
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
47
Chapter 5— Optimizing Printer Performance
Optimizing and Maintaining Print Quality
Intermec designed and configured your printer to provide the best possible
print quality for both direct thermal and thermal transfer media. However,
there are many factors that you need to take into account before you can
achieve maximum print quality.
Correcting Uneven Print Quality
You may experience problems in print quality (ribbon wrinkling or light
print on one side of your label) if the printhead is not making even contact
with the label stock. This condition can happen with any size label stock,
but is most common when using narrow label stock. You need a straightslot screwdriver to turn the bias adjust screw.
To achieve the best print quality, adjust the bias adjust screw each time
you use media of a different width.
Note: You must properly adjust the bias adjust screw to prevent premature
printhead failure and excessive platen wear.
To adjust the bias adjust screw
1 Remove the media cover and locate the bias adjust screw.
Bias adjust
screw
Po
we
r
Al
er
t
Em
pt
y/
Pa
us
e
Fe
ed
/P
au
se
Inte
rmec
34
00
3XXXU.038
48
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 5— Optimizing Printer Performance
2 To compensate for uneven print quality, turn the bias adjust screw as
shown. Adjusting the bias adjust screw causes the printhead to rest
evenly on the drive roller and results in even print quality.
If printing is light on
the left side of label, turn
the bias adjust screw clockwise.
A
R
E
A
R
E
If printing is light on the
right side of label, turn the
bias adjust screw counterclockwise.
3XXXU.039
3 Replace the media cover.
Adjusting the Print Darkness
Use the darkness adjust control in combination with the PrintSet software
configuration tool to fine-tune the darkness of print on your labels. The
fine adjustments compensate for variations in the media (“lot to lot”), the
printhead, or the printer. Set the darkness adjust control after you enter
the media sensitivity number.
To adjust the print darkness
1 Locate the darkness adjust control on the back of the printer.
2 Use a small straight-slot screwdriver to adjust the print darkness.
• To increase the print darkness, turn the control clockwise.
• To decrease the print darkness, turn the control counterclockwise.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
49
Chapter 5— Optimizing Printer Performance
1 2 3 4 5 6 7 8
Turn the darkness
Darkness
adjust control clockwise adjust control
for darker density
1 2 3 4 5 6 7 8
Turn the darkness adjust
control counterclockwise
for lighter density
I
1 2 3 4 5 6 7 8
O
1 2 3 4 5 6 7 8
Screwdriver
3XXXU.037
Adjusting the Label Mark Sensor
The label mark sensor detects the mark on the back of continuous media
stock. The printer uses the output to determine the start of print. The
label mark sensor is behind the platen roller and near the inboard edge of
the printer.
To adjust the label mark sensor
1 Remove the media cover and locate the label mark sensor.
2 Use your index finger to slide the label mark sensor to the correct
position for your media. You can position the label mark sensor
anywhere from the inboard edge of the printer to the center of the paper
path.
50
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 5— Optimizing Printer Performance
Platen
roller
Locate the label mark sensor
behind the platen roller near
the inboard edge of the printer.
Use your index finger to adjust
the label mark sensor.
Inboard edge
of printer.
The platen roller
is not shown
for clarity only.
Label mark
sensor
(The label mark sensor
can be positioned no
more than 1" from the
inboard edge.)
3XXXU.040
3 Enable mark printing with PrintSet, your third-party software, or IPL
commands. For help, see PrintSet online help, your third-party
documentation, or the IPL Programming Reference Manual (P/N
066396).
4 Print a few labels or press Feed/Pause two times to make sure that the
label mark sensor is detecting the black mark on the media.
5 Replace the media cover.
Using the Printer Memory Efficiently
To receive the best performance from your printer, you must understand
how to use the printer RAM. The following sections can help you
determine the most efficient way to use your printer memory. It is
important to remember that using a lot of available memory for storage
reduces the amount of memory used for imaging. The end result is a
decrease in printer performance.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
51
Chapter 5— Optimizing Printer Performance
How Is the Printer RAM Used?
There is enough RAM in the printer to store several different label formats
and still retain enough memory to store downloaded fonts, graphics, and
data. Be careful of how you use your printer memory.
The printer uses static RAM for storing tables, pages, formats, fonts, and
user-defined characters (UDCs). Any RAM you are not using for storage is
available for imaging. For the 3400 and 3600 printers, use PrintSet to
adjust the amount of RAM allocated for storage purposes. If you require
additional RAM, you can purchase a memory expansion option. See
Appendix A for memory expansion information on your printer model.
Making the Most of Your RAM
There are limits to the number of formats, fonts, graphics, or pages that
you can store in the printer. You can define up to 16 fonts, but there may
not be enough room depending on the amount of memory being used for
other purposes. The more formats, graphics, and fonts you store, the less
memory is available.
When you run into a memory usage problem, use PrintSet to see how
much memory remains available. You must upload the memory
information from the printer first. For the 3400 and 3600 printers, you
can adjust the amount of RAM allocated for storage from 10K to an upper
limit that is printer dependent.
If you find that it is necessary to increase your available memory, you can
do one of the following:
• For the 3400 and 3600 printers, adjust the amount of RAM allocated
for storage purposes with the PrintSet software. You can also adjust the
amount of storage RAM with IPL commands. See the IPL Programming
Reference Manual for more information.
• Increase the amount of available memory by using the Memory Reset
portion of the Test and Service menu. See “Resetting the Memory on
Your Printer” on page 59 for more information.
• Delete any unneeded user-defined fonts, graphics, pages, or formats. For
help, see the PrintSet software or the IPL Programming Reference
Manual.
• Purchase additional memory. Please contact your Intermec
representative for information on purchasing additional memory for the
printer.
Increasing Throughput
To print labels as quickly as possible, you must adjust the print speed in
conjunction with the number of image bands (one image band equals 1
inch of label). The print speed and image band settings determine the rate
52
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 5— Optimizing Printer Performance
at which the printer processes the images of your labels. This rate in turn
affects the throughput of the entire printing process.
The printer begins imaging the label as soon as it receives the command to
select a format. Since the printer starts imaging the label so early, the
chance that the imaging process will be unable to keep up with the print
speed decreases and throughput improves. However, if the number of
image bands is too low, the imaging process is unable to keep up with the
print speed. In this case, the printer stops printing and starts again at the
lowest print speed with the maximum number of image bands. If the
image band command is set too high, the printer spends more time than
necessary imaging and slows down label production.
What Is an Image Band?
Image bands are a section of memory where a picture of a label format is
drawn. This drawing process is known as imaging. Once the picture is
imaged, the printer loads the picture from the image bands to the
printhead for printing. Each image band is equal to 1 inch of length of the
label format. The number of image bands you use may be less than the
length of the label being printed. The number of image bands (in inches)
does not have to equal the length of the label since the printer recycles the
image bands. Once the contents of an image band have been printed, it
may be reused to image the next section of the label.
Keep in mind that the more complex the label, the longer it will take to
image each section, thus requiring a slower print speed. To use a higher
print speed, use more image bands to allow more of the imaging process to
complete before printing begins.
How Does the Image Bands Command Work?
The image bands command controls the amount of memory allotted to
the imaging process. When you increase the image band adjustment to a
higher number, you are adding more buffers to the imaging memory. By
doing this, more of the label format is imaged before printing begins.
The minimum number of required image bands is dependent upon the
print speed and the complexity of the label. Labels that contain numerous
fields with different rotations, graphics, or combinations of any number of
these formatting options may require a higher number of image bands.
To set the number of image bands, use PrintSet or the IPL command. For
help, see the PrintSet online help or the IPL Programming Reference
Manual.
Optimizing Print Speed and Image Band Setting
The minimum number of image bands available is two. The maximum
number of image bands varies from printer model. Use PrintSet to check
for the maximum number of image bands available.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
53
Chapter 5— Optimizing Printer Performance
To optimize the number of image bands for your print speed
1 Set the image band setting at the lowest number (2).
2 Print a label at the desired speed.
If the label prints, the image band setting is optimal. You do not need to
perform any more adjustments.
If the number of image bands is too low, the printer aborts the label
before printing is completed and attempts to reprint the label at the
slowest speed (2 ips) with the highest number of image bands. You need
to continue with Step 3.
3 Return to the original print speed and increase the original number of
image bands one at a time.
Continue to increase the number of image bands until the printer prints
a label correctly.
If the printer still aborts and reprints at the highest image band setting,
you may be trying to optimize at a print speed that is too high for your
label format. Try optimizing the number of image bands at a lower print
speed or add expansion RAM.
To print very complex labels at high speeds, you must allocate enough
image bands to completely image the label before printing. Allocate one
band for each inch of label length. By doing this you can print at any
speed; however, there may be a considerable delay between labels.
Optimizing Image Bands for Batch Printing
If you frequently print batches of identical labels or print a quantity of
identical labels, you may want to optimize the number of image bands
for batch printing. Optimizing the number of image bands is especially
helpful if you experience delays between the printing of each label.
To optimize the number of image bands for batch printing, you must
select enough image memory to allow the printer to retain the entire
label image. To optimize batch printing, select the number of image
bands (1 band = 1 inch) to equal the label size. Therefore, if the printed
image stops at a distance of 4 inches from the beginning of the label,
you must select four image bands to prevent reimaging if the label is 5
inches long.
54
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
6
Using Test and Service Mode
This chapter explains the different procedures you can perform while the
printer is in Test and Service mode. Use Test and Service mode on the
printer to print test labels, perform special procedures, and change select
configuration commands. This chapter covers these topics:
• How to use Test and Service mode
• Printing test labels
• Using data line print to troubleshoot communications
• Resetting printer memory
• Setting configuration commands
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
55
Chapter 6— Using Test and Service Mode
Using Test and Service Mode Procedures
For all Test and Service mode tests, pressing the Feed/Pause button pauses
the current test. Holding the Feed/Pause button aborts the current test and
starts a new test.
To enter Test and Service mode
1 Record your current DIP switch settings for later reference.
2 Set all of the DIP switches to the off position.
Set all of the DIP switches to the communications settings of your
host computer.
3 Turn the On/Off switch to the off position.
4 Press and hold the Feed/Pause button while turning the power on.
The printer prints out a hardware configuration label and then enters
Data Line Print mode.
5 Set the DIP switches to the test or service function you wish to perform.
See the following table for a list of the DIP switch settings.
6 Hold the Feed/Pause button down. The test begins immediately.
7 If you wish to perform another function, change the DIP switch settings
and press the Feed/Pause button.
The function the printer is currently executing terminates, and the
printer performs the new function.
The printer remains in Test and Service mode until you turn the power off
and reset the DIP switches. The printer executes all functions as soon as
you select them.
To exit Test and Service mode
1 Turn the printer power off.
2 Reset the DIP switches to their original settings.
3 Turn the printer power back on.
Use the information in the following table to set the DIP switches for the
appropriate Test and Service mode function you want to perform.
56
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 6— Using Test and Service Mode
Test and Service Mode DIP Switch Settings
Default settings are noted with an
*
O = OFF
1 = ON
OFF
TESTS
ON
Top Bank
1
2
3
4
5
6
Bottom Bank
7
8
Test Prints
Configurations
Hardware*
Software
Test Labels
Print Quality
Pitch
Page
Single Page
All Pages
Format
Single Format
All Formats
UDC
Single UDC
All UDCs
Font
Single Font
All Fonts
O O O
Data Line Print
*1
O O O O O O O
Selective Transfer
Receiver
Send Pages
Single Page
All Pages
Send Format
Single Format
All Formats
Send UDC
Single UDC
All UDCs
Send Font
Single Font
All Fonts
Send Configuration
Send Tables
Send All
Memory Reset
Page/Format
UDC/Font
Configuration
Tables
All
1
1
1
2
3
4
5
6
7
8
O O O
1
O
1
O O
1 O
Q
Q
O O
1 O
O O O
Q
Q
O O
1
1
O O
N N N N N
1 1 1 1 1
Q
Q
N N N N N
1 1 1 1 1
Q
Q
O O O
1 O O
N N N N N N N Q
1 1 1 1 1 1 1 Q
1
O
1 O O
N N N N N
1 1 1 1 1
O
O O O
1 O O S
1
O
1
1
1
O O
1 O
O 1
1 1
O O
O S
1
O S
1
1
S
1
S
1
S
1
S
1
S D D D D D
1 1 1 1 1 1
S
1
S
1
S
1
S D D D D D
1 1 1 1 1 1
S
1
S
1
S
1
S S
1 1
S
1
S
1
S
1
S D D D
1 1 1 1
S
1
S
1
1
1
1
1
O O O
1 O O
O 1 O
1 1 O
1 1 1
Q: OFF = Batch of 1. ON = Batch of 100.
N: Page/Format/UDC/Font number. Least significant bit first.
S: Source Page/Format/UDC/Font number. Least significant bit first.
D: Destination Page/Format/UDC/Font number. Least significant bit first.
3XXXU.041
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
57
Chapter 6— Using Test and Service Mode
Printing Test Labels
The printer can print a variety of test print labels that provide you with
information about the printer configuration and the quality of the
printing.
To print a test label
1 Turn the On/Off switch to the off position.
2 Press and hold the Feed/Pause button while turning on the printer.
The printer prints a hardware configuration label and then enters Data
Line Print mode.
3 Set the DIP switches to print the test label of your choice: software,
print quality, or pitch. Refer to the Test and Service Mode DIP Switch
Settings table for the correct settings.
4 Hold the Feed/Pause button down until the printer starts printing.
The printer begins printing out the test label immediately.
5 Exit Test and Service mode by turning the printer off and returning all
DIP switches to their original settings.
Using Data Line Print
Use Data Line Print mode to troubleshoot communication between the
printer and the host and to test the operation of the printer. When the
printer is in Data Line Print mode, it prints out all downloaded data with
the hexadecimal equivalent directly underneath it. Hold the Feed/Pause
button down to momentarily suspend the test. Press the Feed/Pause
button longer to transmit the firmware program and version number to
the host.
To enter Data Line Print mode
1 Turn the On/Off switch to the off position.
2 Press down and hold the Feed/Pause button while turning on the
printer.
The hardware configuration test label prints out. You are now in Data
Line Print mode.
Performing Selective Transfer
If you want to copy select formats, pages, fonts, or graphics to another
printer, use the selective transfer command. Use this command to set up
different printers to print the same label formats.
58
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 6— Using Test and Service Mode
Using the selective transfer command, you can transfer the following label
design attributes from one 3400, 3440, or 3600 printer to another:
• Any specified page or all pages
• Any specified format or all formats
• Any specified font or all fonts
• Any specified user-defined character (UDC) or all UDCs
When you set the printer DIP switches to the setting for selective transfer,
the printer serial port is set at 19,200 baud, even parity, 1 stop bit, and 8
data bits. Set the receiving printer to these communication settings and
power it up in Print mode.
You may set the DIP switch communications settings on the sending
and receiving printers. When you turn the power on in Test and Service
mode, the printer uses the COM setting stored in RAM the last time
the printer was turned on in Run Mode. Set the receive printer to the
same communications DIP switch settings and turn the power on in
Print mode.
To perform selective transfer
1 Turn the On/Off switch to the off position.
2 Press down and hold the Feed/Pause button while turning on the
printer. The hardware configuration test label prints.
3 Connect the serial ports of the sending and receiving ports together with
an RS-232 null modem cable. For help, refer to “Connecting the
Printer to Your System” on page 8 and “Communications Interfaces”
on page 98.
4 Set the DIP switches on the sending printer for selective transfer as
shown in the Test and Service Mode DIP Switch Settings table on page
57.
5 Press the Feed/Pause button on the receiving printer and then on the
sending printer to initiate selective transfer.
6 Exit Test and Service mode by turning the printer power off and
returning all DIP switches to their original settings.
Resetting the Memory on Your Printer
Use memory reset if you want to return your printer to its default
configuration or if you need to increase the amount of memory available in
your printer. You can also use memory reset to clear pages and formats,
user-defined characters and fonts, configurations, tables, or all of these
parameters.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
59
Chapter 6— Using Test and Service Mode
To use memory reset
1 Turn the printer off.
2 Press and hold the Feed/Pause button while turning on the printer. The
printer prints a hardware configuration test label.
3 Set the DIP switches to reset a portion or all of the memory by using
the Test and Service Mode DIP Switch Settings table on page 57.
4 Hold the Feed/Pause button down for 1 second. The printer resets a
portion or all of its memory.
5 To exit Test and Service mode, turn the printer power off and then on.
If you have a 3400C printer, you can also reset the entire memory on
the printer. This procedure is identical to resetting the memory by
removing the battery.
To reset the entire memory on the 3400C printer
1 Turn the printer off.
Note: You must turn off the printer before pressing the memory reset
button or the printer may not operate correctly.
2 Using a small screwdriver, press the memory reset button for 30
seconds. The printer resets the entire memory.
1
2
3
4
I
O
5
6
7
8
1
2
3
4
5
I
O
6
7
8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
I
O
3XXXU.042
3 Turn the printer on.
60
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 6— Using Test and Service Mode
Setting Configuration Commands in Test and Service Mode
Test and Service mode also provides you with an alternative to using
PrintSet or sending configuration commands down from the host. You can
change these configuration commands by setting the Test and Service
mode DIP switches:
• Label rest point
• 86XX emulation
• X forms adjust
• Y forms adjust
The following table provides you with the Test and Service mode DIP
switch settings for changing the configuration commands.
Configuration DIP Switch Settings
Top Bank
O = OFF
1 = ON
Bottom Bank
OFF
ON
1
2
3
Label Rest Point
Adjust Forward
Adjust Backward
O
1
1
86XX Emulation
Advance Mode
10 Mil
15 Mil
1
X Forms Adjust
Adjust Forward
Adjust Backward
1
Y Forms Adjust
1
4
5
7
8
1
2
3
4
5
6
7
8
N N N N N
N N N N N
O
1
O
6
1
O O
1 O
1 1
1
1
1
O
1
1
1 O
N N N N N
N N N N N
N N N N N
N: Number. Least significant bit first.
3XXXU.046
Setting the Number of Dot Increments
You can move the label rest point and X forms adjust configuration
commands forward or backward by setting the printer DIP switches. Use
the top bank of DIP switches to determine whether the movement is
forward or backward. Use the bottom bank of DIP switches to set the
number of dot increments for label rest point, X forms adjust, and Y forms
adjust. The printer moves in 5 mil increments or 0.005 inch per dot.
If the printer (3440 only) is in 2.5 mil Advanced mode it moves 0.0025
inch per dot.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
61
Chapter 6— Using Test and Service Mode
Dot Increments DIP Switch Settings
Bottom Bank
OFF
0 = OFF
1 = ON
ON
1
2
3
4
5
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
1
O
O
1
O
O
O
1
1
1
1
O
O
O
O
1
1
1
1
O
O
O
O
1
1
1
1
O
O
O
O
1
1
1
O
O
O
O
O
O
O
1
1
1
1
1
1
1
1
O
O
O
O
O
O
O
O
1
1
1
1
1
1
1
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
# of dot increments
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
3XXXU.047
To set the number of dot increments
1 In the top bank, turn the appropriate switches on or off for forward or
backward movement. See the Configuration DIP Switch Settings table
on page 61 for the appropriate DIP switch settings.
2 Go to the Dot Increments DIP Switch Settings table on page 62 and
scan down the # of Dot Increments column until you reach the number
of dot increments you want to adjust the command forward or
backward.
3 In the bottom bank turn on the switches that have a 1 in their column.
Turn off all other switches.
4 Press the Feed/Pause button and the printer prints the software
configuration label and stops at the new location.
For example, you print a label and discover that it does not extend far
enough from the tear bar. You need to move the label rest point forward
10 dot increments (0.05 inch) so that the printer feeds more label out
when it is done printing. Find 10 in the # of Dot Increments column. It
shows a 1 in the columns of DIP switches 2 and 4, and a O in the columns
62
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 6— Using Test and Service Mode
of 1, 3, and 5. The 1 tells you to turn the switch on. The O tells you to
turn the switch off. Turn on switches 2 and 4. Turn off all other switches.
Adjusting the Label Rest Point
The label rest point configuration command adjusts the point at which the
printer presents each label for removal. Use this command in conjunction
with self-strip applications. The label rest point adjust range is from -30
dot increments (furthest back) to +30 dot increments (furthest forward).
Note: Even though the default setting for the 3440 printer is 2.5 mil, each
dot is a 5 mil increment when you use the DIP switches to adjust the label
rest point
Use a negative number if you want the printer to retract the label a
number of dot increments after it prints the label. Use a positive number if
you want the printer to feed the label a number of dot increments after it
prints the label.
There are three ways to adjust the label rest point:
• You can use the Test and Service DIP switch bank. Follow the
procedure below to use the DIP switch settings to adjust the label rest
point.
• You can set it by using the PrintSet application software. See the Paper
Handling portion of PrintSet for more information.
• You can use the IPL command. See the IPL Programming Reference
Manual (P/N 066396) for more information.
To adjust the label rest point
1 Turn the On/Off switch to the off position.
2 Press and hold the Feed/Pause button while turning on the printer.
The printer prints the hardware configuration test label and then enters
Data Line Print mode.
3 In the top bank of the Test and Service DIP switches, turn off switch 1
and turn on switches 2 and 3.
To adjust the label rest point forward (feed more label), turn off DIP
switch 4.
To adjust the label rest point backward (retract label), turn on DIP
switch 4.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
63
Chapter 6— Using Test and Service Mode
Top Bank
Top Bank
OFF
OFF
ON
ON
1
2
3
4
Switch settings
for feeding
label forward
1
2
3
4
Switch settings
for retracting label
3XXXU.48
4 In the bottom bank of the Test and Service DIP switches, turn on or off
the appropriate DIP switches. See the Dot Increments DIP Switch
Settings table on page 62.
5 Press the Feed/Pause button.
The printer prints the software configuration label and stops at the new
location.
6 Verify that the label rest point number on the software configuration
label matches the number you set in Step 4.
7 Try printing again to see if you need to readjust the DIP switches in the
bottom bank.
8 If you need to readjust the DIP switches in the Bottom Bank, repeat
Steps 4 through 7. If not, exit Test and Service mode by turning off the
printer and returning all DIP switches to their original settings.
Setting Emulation Mode
If you are replacing an Intermec 8636 or 8646 printer with a 3400, 3440,
or 3600 printer, you can keep your existing network, hardware, software,
and label formats by using Emulation mode. The labels produced on your
new printer will look like the ones that your old 86XX printer printed.
There are three ways to set the printer to Emulation mode:
• Use the DIP switches in the Test and Service DIP switch bank. For
help, see the following set of steps.
• Use PrintSet to select either 100 dpi (10 mil) or 66 dpi (15 mil) mode.
For help, see the PrintSet online help.
• Use the IPL command set to select Emulation mode. For help, see the
IPL Programming Reference Manual (P/N 066396).
To set the printer to Emulation mode using DIP switches
1 Upload label formats, fonts, and graphics from the 8636 or 8646
printer to the host computer.
2 Turn the On/Off switch to the off position.
3 Disconnect the 86XX printer and install your printer. See Chapter 1 for
information on installing your printer.
64
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 6— Using Test and Service Mode
4 Press and hold the Feed/Pause button while turning on the printer. The
printer prints the hardware configuration label.
5 In the top bank of the Test and Service DIP switches, turn on switches
1 and 3 and turn off switch 2.
6 Use the table below to help you choose the appropriate DIP switch
settings:
Setting
Emulation 10 mil
Description
The printer emulates an 8636 or 8646 printer printing
multiples of 10 mil (0.01 inch) drag and 10 mil (0.01 inch)
picket bar codes.
Emulation 15 mil
The printer emulates an 8636 or 8646 printer printing
multiples of 10 mil (0.01 inch) drag and 15 mil (0.015
inch) picket bar codes.
Advanced 5 mil
(default)
The printer uses the 3400 and 3600 command set and
prints in multiples of 5 mil (0.005 inch) drag and 5 mil
(0.005 inch) picket bar codes.
Advanced 2.5 mil
(default on 3440)
The printer uses the 3440 command set and prints in
multiples of 2.5 mil (0.0025 inch) drag and 2.5 mil (0.0025
inch) picket bar codes.
7 To enable 10 mil emulation, turn on DIP switch 4 and turn off DIP
switch 5.
To enable 15 mil emulation, turn on DIP switches 4 and 5.
To enable 5 mil Advanced mode, turn off DIP switches 4 and 5.
To enable 2.5 mil Advanced mode, turn off DIP switch 4 and turn on
DIP switch 5.
8 Press the Feed/Pause button.
The printer prints out the software configuration label. Verify that the
label states the correct mode.
9 Turn the printer off and then on.
10 Download the 86XX formats, fonts, and graphics from the host to the
printer.
Using Forms Adjust
If your label prints too close to one edge, you can reposition it by using the
X Forms Adjust and Y Forms Adjust features. The X forms adjust controls
the position of the printing area along the length of the label. The Y forms
adjust controls the position of the printing area along the width of the
label.
The following figure shows the default X and Y origins. You can control
the default X origin (top of form) with the PrintSet software or with the
Test and Service DIP switches. You can control the default Y origin with
the DIP switches only.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
65
Chapter 6— Using Test and Service Mode
Origin (Ø,Ø)
-X➤
➤ +X
Y *FORMAT*
*FORMAT*
➤
+Y
Leading
Edge
3XXXU.049
➤
Direction of media from printer
Default X and Y origins: This illustration shows the default X and Y origins. You can
control the default X origin (top of form) with PrintSet or with the Test and Service DIP
switches. You can control the default Y origin with the DIP switches only.
The default X origin is 0.10 inch (20 dot increments) from the edge of the
label. You can move the X origin forward or back 30 dot increments. The
default Y origin is 0.05 inch (10 dot increments) from the leading edge of
the label. Each dot increment is 5 mil (0.005 inch).
Note: Even though the default setting for the 3440 printer is 2.5 mil, each
dot is a 5 mil increment when you use the DIP switches to adjust the label
rest point.
X Forms Adjust
When you move the X origin forward, the printer moves the top of form
away from the edge before printing the label information. When you move
the X origin backward, the printer moves the top of form closer to the
edge before printing the label information.
To set the X forms adjust
1 Turn the On/Off switch to the off position.
2 Press and hold the Feed/Pause button while turning on the printer.
The printer prints out the hardware configuration label and then enters
Data Line Print mode.
3 In the top bank of the Test and Service DIP switches, turn on switches
1, 2, 3, and 4.
66
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Chapter 6— Using Test and Service Mode
To move the X origin forward, turn off switch 5.
To move the X origin backward, turn on switch 5.
Top Bank
Top Bank
OFF
OFF
ON
ON
1
2
3
4
Switch settings
for moving the
X origin forward
5
1
3XXXU.050
2
3
4
5
Switch settings
for moving the
X origin backward
4 In the bottom bank of the Test and Service DIP switches, turn on or off
the appropriate DIP switches. See the Dot Increments DIP Switch
Settings table on page 62 to see how to set the X forms adjust forward
or backward a given number of increments.
5 Press the Feed/Pause button.
The printer prints out the software configuration label using the new X
forms adjust setting.
6 Verify the X forms adjust number on the software configuration label
matches the number you set in Step 4.
Y Forms Adjust
Use the Y Forms Adjust feature to control the position of the image in the
direction parallel to the printhead. See the Dot Increments DIP Switch
Settings table on page 62 for information on how to move the image
forward a number of dot increments. If your label is too close to one edge
of the printhead, you can adjust it using this feature.
To set the Y forms adjust
1 Turn the On/Off switch to the off position.
2 Press and hold the Feed/Pause button while turning on the printer.
The printer prints out the hardware configuration label and then enters
Data Line Print mode.
3 In the top bank of the Test and Service DIP switches, turn on switches
1, 2, and 3.
4 In the bottom bank of the Test and Service DIP switches, turn on or off
the appropriate DIP switches. See the Dot Increments DIP Switch
Settings table on page 62 to see how to set the X forms adjust forward
or backward a given number of increments.
5 Press the Feed/Pause button. The printer prints out the software
configuration label using the new Y forms adjust setting.
6 Verify the Y forms adjust number on the software configuration label
matches the number you set in Step 4.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
67
Chapter 6— Using Test and Service Mode
68
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
A
Specifications
This chapter contains the following reference information:
• Printer Specifications
• Printer options
• Bar code symbologies supported
This chapter describes the specifications that are common to the 3400 (A,
B, C, and D), 3440, and 3600 printers. For information about the 3400e
printer, see the EasyCoder 3400e Bar Code Label Printer User’s Manual
(P/N 071881).
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
69
Appendix A— Specifications
Printer Specifications
Electrical Requirements
Input Voltage
100, 120, or 240 VAC ± 10%
Frequency
47-63 Hz
Environment
Operating
10°C to 40°C (50°F to 104°F)
Humidity
10% to 90% non-condensing
Communications
• Asynchronous RS-232C, RS-422, RS-485 interfaces
• Serial ASCII code
• Hardware (Ready/Busy) Flow Control
• XON/XOFF Protocol
• Intermec Standard Block Protocol
• Polling Mode D Protocol
• Multi-Drop Protocol
• Baud Rates: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,000
Maximum Printer Baud Rates
Printer
3400A
Maximum Baud Rate
19,200
3400B
19,200
3400C
38,400
3400D
38,400
3440
57,600
3600
19,200
Printing Method
The 3400, 3440, and 3600 printers are capable of direct thermal (DT)
printing or thermal transfer (TTR) printing using thermal transfer ribbon.
70
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix A— Specifications
Self-Strip
The self-strip rewinder hub can take up the backing of an entire 152-meter
(6,000-inch) roll of media.
Peel Release 10-50 grams
Note: For the 3400C and 3400D printer, self-strip printing is an option
that you order with your printer. Self-strip printing is standard on the
3400A and 3400B.
3400 Specifications
This section contains specifications for the 3400 A, B, C and D printers.
For information about the 3400e printer, see the EasyCoder 3400e Bar
Code Label Printer User’s Manual (P/N 071881).
Dimensions (No Options Installed)
Height
27.9 cm (11 in)
Width
26.7 cm (10.5 in)
Length
43.2 cm (17 in)
Weight
15.8 kg (35 lbs)
Character Sets
US ASCII
Norwegian/Danish
UK ASCII
Swedish/Finnish
German
Italian
French
Spanish
Swiss
Memory
Printer
3400A
3400B
Memory
Base
32K used for storage and image.
Optional
128K Expanded Memory EPROM
Base
128K used for storage and image.
Optional
2 Meg Bitmapped Kanji / Katakana PCB card
6 Meg Bitmapped and Outline Kanji / Katakana PCB card
3400C
Base
512K of DRAM
128K of SRAM, 60K default allocated for storage
Optional
512K of SRAM
2, 6, or 8 MB flash module
3400D
Base
128K used for storage and image.
Optional
512K Expanded Memory EPROM
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
71
Appendix A— Specifications
Printhead
Printed dot size
0.127 mm (0.00492 inch) square
Width
104 mm (4.1 in) maximum
Resolution
8 dots per mm (203 dots per inch)
Number of elements
832 per printhead
“X” dimensions
10 mil to 50 mil (0.25 mm to 1.27 mm); 5 mil (0.13 mm) in
drag mode only (specified media only)
Ribbon
Roll
152 m (6,000 linear in)
Widths
51 mm (2.0 in)
76 mm (3.0 in)
104 mm (4.1 in)
Diameter
57 mm (2.25 in) maximum
Printing Speed
Maximum for 3400A and 3400B
127 mm (5 in) per second
Maximum for 3400C and 3400D
152.4 mm (6 in) per second
Minimum
50.8 mm (2 in) per second
You can change the print speed in 1 ips increments only: 2, 3, 4, 5, 6, or 8.
Fonts and Graphics
There are nine resident bitmap scaleable fonts (including OCR A and B).
You can use font ID 3 through 6 and 8 through 19 to download userdefined fonts.
72
Maximum UDF
76.2 mm (3 in) square
Maximum UDC
76.2 mm (3 in) square
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix A— Specifications
Media
C
D
F
E
G
H
A
B
3XXXU055.eps
Media dimensions: This illustration shows how to measure the media dimensions. See
the next table, Minimum and Maximum Media Dimensions, for specific media
dimensions.
Minimum and Maximum Media Dimensions
Letter
A
Description
Label width
Minimum
16.5 mm (0.65 in)
Maximum
111.8 mm (4.4 in)
B
Backing width (or tag width)
19.1 mm (0.75 in)
114.3 mm (4.5 in)
C
Gap between labels
2.54 mm (0.1 in)
25.4 mm (1 in)
D
Label length - self-strip media
25.4 mm (1.0 in)
610 mm (24 in)
Label length - butt cut media
12.7 mm (0.5 in)
610 mm (24 in)
E
Media thickness
(including backing)
0.076 mm
(0.003 in)
0.25 mm
(0.012 in)
F
Reflective sensor mark length
2.54 mm (0.1 in)
12.7 mm (0.5 in)
G
Notch length
2.54 mm (0.1 in)
3.18 mm
(0.125 in)
H
Notch height (depth)
6.4 mm (0.25 in)
12.7 mm (0.5 in)
Roll diameter
N/A
213 mm (8.38 in)
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
73
Appendix A— Specifications
3440 Specifications
Dimensions (No Options Installed)
Height
27.9 cm (11 in)
Width
26.7 cm (10.5 in)
Length
43.2 cm (17 in)
Weight
15.8 kg (35 lbs)
Character Sets
US ASCII
Norwegian/Danish
UK ASCII
Swedish/Finnish
German
Italian
French
Spanish
Swiss
Memory
Base
Optional
1MB of DRAM
4 or 8 MB DRAM SIMM modules
256K of SRAM standard
4 to 8 MB Kanji/Katakana flash SIMM module
Printhead
Printed dot size
0.065 mm (0.0025 in) square
Width
112 mm (4.4 inches) maximum
Resolution
16 dots per mm (406 dots per inch)
Number of elements
1,792 per printhead
“X” dimensions
5 mil to 50 mil (0.127 mm to 1.27 mm); 2.5 mil (0.06 mm) in drag
mode only (specified media only)
Ribbon
Roll
152 m (6,000 linear in)
Widths
51 mm (2.0 in)
76 mm (3.0 in)
104 mm (4.1 in)
Diameter
57.2 mm (2.5 in), 114.3 mm (4.5 in) maximum
Printing Speed
Maximum
127 mm (5 in) per second
Minimum
50.8 mm (2 in) per second
You can change the print speed in 1 ips increments only: 2, 3, 4, or 5.
74
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix A— Specifications
Fonts and Graphics
The 3440 printer contains 21 resident bitmap fonts and three outline
fonts. You can use font ID 3 through 6 and 8 through 19 to download
user-defined fonts.
Maximum UDF
102 mm (4 in) square with standard
memory option
Only limited by available
memory on SIMM module.
Maximum UDC
102 mm (4 in) square with standard
memory option
Only limited by available
memory on SIMM module.
Media
C
D
F
E
G
H
A
B
3XXXU055.eps
Minimum and Maximum Media Dimensions
Letter
Description
Minimum
Maximum
A
Label width
16.5 mm (0.65 in)
111.8 mm (4.4 in)
B
Backing width (or tag width)
19.1 mm (0.75 in)
114.3 mm (4.5 in)
C
Gap between labels
2.54 mm (0.1 in)
25.4 mm (1 in)
D
Label length - self-strip media
25.4 mm (1.0 in)
610 mm (24 in)
Label length - butt cut media
12.7 mm (0.5 in)
610 mm (24 in)
E
Media thickness
(including backing)
0.076 mm
(0.003 in)
0.25 mm
(0.012 in)
F
Reflective sensor mark length
2.54 mm (0.1 in)
12.7 mm (0.5 in)
G
Notch length
2.54 mm (0.1 in)
3.18 mm
(0.125 in)
H
Notch height (depth)
6.4 mm (0.25 in)
12.7 mm (0.5 in)
Roll diameter
N/A
213 mm (8.38 in)
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
75
Appendix A— Specifications
3600 Specifications
Dimensions (no options installed)
Height
27.9 cm (11 in)
Width
30.5 cm (12 in)
Length
43.2 cm (17 in)
Weight
20.3 kg (45 lbs)
Character Sets
US ASCII
Norwegian/Danish
UK ASCII
Swedish/Finnish
German
Italian
French
Spanish
Swiss
Memory
Base
512K of DRAM
128K of SRAM standard, 60K default allocated for storage
Optional
512K of SRAM expanded
Printhead
Printed dot size
0.13 mm (0.00492 in) square
Width
171 mm (6.6 in) maximum
Resolution
8 dots per mm (203 dots per in)
Number of elements
1,344 per printhead
“X” dimensions
10 mil to 50 mil (0.25 mm to 1.27 mm); 5 mil (0.13 mm)
in drag mode only (specified media only)
Ribbon
Roll
152 m (6,000 linear in)
Widths
80 mm (3.15 in)
107 mm (4.21 in)
128 mm (5.04 in)
168 mm (6.60 in)
Diameter
57 mm (2.25 in) maximum
Printing Speed
Maximum
127 mm (5 in) per second
Minimum
50.8 mm (2 in) per second
You can change the print speed in 1 ips increments only: 2, 3, 4, or 5.
76
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix A— Specifications
Fonts and Graphics
There are nine resident bitmap scaleable fonts (including OCR A and B).
You can use font ID 3 through 6 and 8 through 19 to download userdefined fonts.
Maximum UDF or UDC
76.2 mm (4 in) square
Media
C
D
F
E
G
H
A
B
3XXXU055.eps
Minimum and Maximum Media Dimensions
Letter
Description
Minimum
Maximum
A
Label width
76.2 mm (3.0 in)
167.6 mm (6.6 in)
B
Backing width (or tag width)
78.7 mm (3.1)
170.2 mm (6.7 in)
C
Gap between labels
25.4 mm (1.0 in)
25.4 mm (1.0 in)
D
Label length - self-strip media
25.4 mm (1.0 in)
610 mm (24 in)
Label length - butt cut media
12.7 mm (0.5 in)
610 mm (24 in)
E
Media thickness
(including backing)
0.076 mm
(0.003 in)
0.30 mm
(0.012 in)
F
Reflective sensor mark length
25.4 mm (1.0 in)
12.7 mm (0.5 in)
G
Notch length
25.4 mm (1.0 in)
3.18 mm
(0.125 in)
Notch height (depth)
6.4 mm (0.25 in)
12.7 mm (0.5 in)
Roll diameter
N/A
213 mm (8.38 in)
H
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
77
Appendix A— Specifications
Printer Options
This page contains a list of the options you can use with the printer along
with a brief description. Consult your Intermec representative to order any
option.
Memory Expansion and Fonts
The memory expansion option is different for each printer. See the section
that applies to your printer.
3400 Printer
Printer Model
3400A
Memory
128K Expanded Memory EPROM
Part Number
060944
3400B, 3400C, 3400D
2 Meg Bitmapped Kanji / Katakana
PCB card
061486S-001
3400B, 3400C, 3400D
6 Meg Bitmapped & Outline Kanji
/ Katakana PCB card
061485S-001
3400C, 3400D
512K Expanded Memory EPROM
062785
3400C, 3400D
2 Meg expansion PCB board for
storage only
067585
3400C, 3400D
8 Meg expansion PCB board for
storage only
067586
The 3400C memory expansion option replaces the 128K of SRAM with
512K of SRAM to hold more fonts or bitmap graphics. It also increases
the printer’s image buffering capabilities. Flash modules in 2, 6, or 8 MB
are available to increase storage capacity.
The kanji/katakana option allows the printer to print Japanese characters
in two Kanji fonts and three Katakana fonts. This option also provides
increased storage capacity.
3440 Printer
You can install a DRAM SIMM module into the SIMM socket on the main
PCB to hold more fonts or bitmap graphics. It also increases the image
buffering capabilities of the printer. Flash SIMM modules are available to
increase storage capacity. You can purchase either module in 4 or 8 MB sizes
only.
3600 Printer
The memory expansion option replaces the 128K of SRAM with 512K of
SRAM to hold more formats, fonts, or bitmap graphics. It also increases the
image buffering capabilities of the printer.
78
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix A— Specifications
Communication Interface
Twinax Interface
This option lets you connect your printer to an IBM twinaxial cable
system with a twinax interface so your printer emulates an IBM 5256
Model 1 printer and can operate with an IBM System/34, System/36,
System/38, or AS/400 host computer.
Coax Interface
The coax interface adapter allows the printer to emulate an IBM 3287
printer by connecting the printer to IBM 3270 Type A coaxial cable
computer systems operating in the VTAM (CICS/IMS/TSO) or 8100
(DPPX) environments. With the coaxial adapter you can connect the
printer to an IBM 3174/76/99 system controller/multiplexer.
Centronics Parallel Interface
The Centronics parallel interface allows only one-way communications
with the printer. You can purchase the Intermec parallel cable (P/N
051211), purchase the appropriate cable from your local computer store,
or see “Parallel Interface Pin Descriptions” on page 80 to make your own
interface cable.
Note: The maximum cable length for a parallel interface is 3.1 m (10 ft).
EasyLAN 10i2 Adapter
The external EasyLAN 10i2 Ethernet adapter (P/N 072885) and the
internal EasyLAN 10i2 Ethernet adapter (P/N 072894) allow you to share
your available printer resources with everyone on your Ethernet network.
These adapters are compatible with the 3400D, 3400C, 3440, and 3600
printers.
Note: If you want to install the EasyLAN 10i2 adapter on a 3400B,
contact your support representative. This adapter is not recommended for
the 3400A.
You also need the parallel port option installed on your printer to connect
the external EasyLAN 10i2 adapter. For more information, see the
EasyLAN 10i2 documentation.
Finishers
Cutter
Use the cutter option to cut continuous media into individual labels ready for
use. This 3400C and 3400D option works best for individual random lengths
or short batches of different label lengths. The cutter option must be ordered
when you order your 3400C and 3400D printers.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
79
Appendix A— Specifications
Batch Takeup
This device automatically spools labels as they are printed. This
attachment is limited to small batches with maximum outer diameter
(OD) of 12.7 centimeters (5 inches).
Self-Strip Printing
Use self-strip printing in applications where you want to apply labels to a
surface immediately. After printing a label, the printer prints out the label with
the backing removed. This option must be ordered when you order your
printer.
Parallel Interface Pin Descriptions
The following pin descriptions are for the printer’s parallel interface
connector:
Parallel Interface Pin Descriptions
80
Signal
DATASTB
Pin
1
Return
19
Direction
IN
DB0
2
20
IN
DB1
3
21
IN
DB2
4
22
IN
DB3
5
23
IN
DB4
6
24
IN
Description
Negative pulse. Latches DB0-7 on
the rising edge. Eight bits in parallel
provide data input. High is logical 1
and LOW is logical 0.
DB5
7
25
IN
DB6
8
26
IN
DB7
9
27
IN
ACK
10
28
OUT
Negative pulse. Data has been
received.
BUSY
11
29
OUT
If HIGH, printer cannot receive
data.
PE
12
30
OUT
If HIGH, out of ribbon or media.
SELECT
13
-
OUT
Pulled to +5V. Printer is on.
CHASSIS
GND
17
-
-
Printer’s chassis gnd isolated from
logic gnd.
INIT
31
16
IN
Clears I/OINT0 latch.
FAULT
32
33
OUT
See printer display.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix A— Specifications
Bar Code Symbologies Supported
The 3400, 3440, and 3600 support these bar code symbologies:
Supported Bar Code Symbologies
Symbology
Codabar
Description
Originally developed in 1972, Codabar is a numeric symbology most
commonly used in libraries, blood banks, and air parcel express
applications.
Code 2 of 5
Code 2 of 5 is a straightforward numeric symbology developed in the
late 1960s. It has been used for warehouse sorting systems,
photofinishing envelope identification, and for tracking sequentially
numbered airline tickets. All information is contained in the width of
the bars; the spaces do not contain information.
Code 11
Code 11 was developed in early 1977 to satisfy requirements for a very
high density, discrete numeric bar code. The most extensive application
of Code 11 has been for labeling telecommunications equipment.
Code 39
Code 39 is the first alphanumeric symbology ever developed and is the
standard non-retail bar code. It is a discrete, self-checking symbology of
variable length and is used mostly by the automobile and medical
industries.
Code 93
Introduced in 1983, Code 93 was specially designed to complement
Code 39. With the correct reading equipment, the two alphanumeric
codes may be interchanged throughout a system without making any
changes to software.
Code 128
Code 128 was introduced in 1981 as a very high density, alphanumeric
symbology. It is a variable length, continuous code that employs
multiple element widths.
EAN
The European Article Numbering system (abbreviated as EAN) is a
numeric superset of UPC. EAN has both a version that uses 8 digits
and a version that uses 13 digits. The version with 13 digits encodes
the same number of bars as 12 digit UPC Version A, but the 13th digit
is encoded into a parity pattern at the left of the center guard bar.
Interleaved
2 of 5
Interleaved 2 of 5 is a high density, self-checking, continuous numeric
symbology, which has mainly been used in the distribution industry.
Interleaved 2 of 5 actually encodes two digits, one in the bars and one
in the spaces.
POSTNET
The Postal Numeric Encoding Technique (POSTNET) uses binary
digits, represented as full bars and half bars, to provide a numeric bar
code symbology that is easily read and decoded by optical reading
systems. POSTNET provides both error detection and correction
capabilities.
HIBC 128
See the IPL Programming Reference Manual (P/N 066396) for a
complete list.
UPC
Universal Product Code (UPC) is a subset of EAN. It is a fixed length,
numeric, continuous symbology employing four element widths. Two
common types of UPC are Version A, which encodes 12 digits, and
Version E, which encodes 6 digits. UPC has been used in the
supermarket industry since 1973. UPC supplemental code is intended
for only periodical issue numbers.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
81
Appendix A— Specifications
Supported 2D Stacked Symbologies
Note: 2D stacked symbologies are not available on the 3400A.
Symbology
Code 16K
Description
Introduced in 1988, Code 16K is an alphanumeric symbology similar
to Code 49 in that it employs multiple rows (from 2 to 16). Each row
is fixed length and uses a mirror image of the Code 128 coding
patterns.
Code 49
Code 49 is an alphanumeric symbology developed in 1987 as a means
of labeling very small objects. A Code 49 bar code contains from two
to eight adjacent rows, each separated by a one-module separator bar.
PDF417
PDF417 is a stacked 2D symbology that provides the ability to scan
across rows of code. Each row consists of start/stop characters, row
identifiers, and symbol characters (called “codewords”). Each
codeword consists of four bars and four spaces and contain the actual
data. In addition to being able to condense a large amount of
information into the stacked format, PDF417 provides an extensive
error detection and correction option. Up to 510 characters can be
recovered if they are lost due to an error in scanning or if the label is
damaged. PDF417 codes can be scanned with a laser scanner or
imaging device that features 2D code scanning capability.
Data Matrix
Data Matrix is a 2D matrix symbology that is made up of square
modules arranged within a perimeter finder pattern. The finder pattern
is a perimeter to the data region and is one module wide. Two adjacent
sides are solid dark lines. These lines are used to define physical size,
orientation, and symbol distortion.
Maxicode
Maxicode is a fixed-size symbology that is made up of offset rows of
hexagonal elements arranged around a bull’s eye finder pattern. Each
hexagon represents one bit of information and is either black or white
depending on the state of the encoded data bit. United Parcel Service
(UPS) Research and Development developed Maxicode for the specific
purpose of encoding information about a parcel.
This symbology only encodes very specific data that is divided into the
following fields: a 5-digit zip code, a 4-digit zip code extension, a 3digit country code, a 3-digit class of service, and a string of uppercase
letters, numbers, or limited punctuation marks.
QR Code
82
QR (Quick Response) Code is a matrix 2D symbology that encodes
data into patterns consisting of black and white dots or modules. A
three-position detection pattern enables omni-directional reading and
ultra high-speed reading. QR Code can handle a wide range of data,
including numerical, alphabetical, Kanji, Hiragana, Katakana, graphics,
and control codes. A built-in error correction function enables the QR
Code to repair errors in the code.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
B
Character Sets
This chapter contains tables for the character sets that the 3400, 3440, and
3600 printers support. To select a character set, use PrintSet, your thirdparty software application, or the IPL command set. This chapter contains
these character sets:
• International character sets
• Extended character sets
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
83
Appendix B— Character Sets
International Character Sets
The following tables show which hex codes to download for international
characters not available in the U.S. character set. To use the tables, find the
hex code for the U.S. character that corresponds with the character in your
language.
Advanced Character Table
If you are running your printer in Advanced mode (you are not using
86XX Emulation), use this table to find the right hex codes for the
international character sets.
23
24
40
5B
5C
5D
5E
60
7B
7C
7D
7E
U.S. ASCII
#
$
@
[
\
]
^
`
{
¦
}
U.K. ASCII
£
$
@
[
\
]
^
`
{
¦
}
~
−
Germany
#
$
§
Ä
Ö
Ü
^
`
ä
ö
ü
France
£
$
à
°
ç
§
^
`
é
ù
è
ß
¨
Norway/Denmark
#
$
@
Æ
Ø
Å
^
`
æ
ø
å
−
Sweden/Finland
#
Ì
É
Ä
Ö
Å
Ü
é
ä
ö
å
ü
Spain
£
$
§
¡
Ñ
¿
^
`
°
ñ
ç
~
Switzerland
#
$
à
°
ç
é
^
ù
ä
ö
ü
è
Italy
£
$
§
°
ç
é
^
ù
à
ò
è
ì
84
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix B— Character Sets
Emulation Mode Character Table
This table shows the hex codes for the character sets that print if your
printer is running under Emulation mode.
23
24
40
5B
5C
5D
5E
60
7B
7C
7D
7E
U.S. ASCII
#
$
@
[
\
]
^
`
{
¦
}
~
U.K. ASCII
£
$
@
[
\
]
^
`
{
¦
}
~
Germany
#
$
§
Ä
Ö
Ü
^
`
ä
ö
ü
ß
France
£
$
à
°
ç
§
^
`
é
ù
è
¨
Norway/Denmark
#
$
@
Æ
Ø
Å
^
`
æ
ø
å
~
Sweden/Finland
#
¤
É
Ä
Ö
Å
Ü
é
ä
ö
å
ü
Spain
Pt
$
@
¡
Ñ
¿
^
`
¨
ñ
ç
~
Switzerland
#
$
à
°
ç
é
^
ù
ä
ö
ü
è
Italy
#
$
§
°
ç
é
^
ù
à
ò
è
ì
IBM Translation Character Table
If you are running your printer with IBM Translation enabled, use this
table to find the right hex codes for the international character sets.
21
23
24
40
5B
5C
5D
5E
60
7B
7C
7D
7E
U.S. ASCII
¦
#
$
@
¢
\
!
¬
`
{
¦
}
~
U.K. ASCII
¦
#
£
@
$
\
!
¬
`
{
¦
}
_
Germany
!
#
$
§
Ä
Ö
Ü
^
`
ä
ö
ü
ß
France
!
£
$
à
°
ç
§
^
`
é
ù
è
¨
Norway/Denmark
!
Æ
Å
Ø
#
\
¤
^
`
æ
ø
å
ü
Sweden/Finland
!
Ä
Å
Ö
§
É
¤
^
é
ä
ö
å
ü
Spain
¦
Ñ
Pt
@
[
\
]
¬
`
{
ñ
}
¨
Switzerland
!
#
$
à
°
ç
é
^
ù
ä
ö
ü
è
Italy
!
£
$
§
°
ç
é
^
ù
à
ò
è
ì
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
85
Appendix B— Character Sets
Code Page 850 Character Table
!
"
22
15
#
$
%
&
'
(
)
∗
+
,
-
.
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
16
08
➝
14
13
07
➝
▲
21
06
§
17
18
09
0A
➝
19
1A
0B
➝
20
05
¶
1B
0C
1C
0D
0E
0F
➝
12
♣
♥
11
♦
04
➝
10
♥
03
➝
02
➝
01
▲
00
➝
This table shows the character set that prints if your 3440 printer has Code Page
850 selected as the printer language.
▲
1E
▼
1F
➝
1D
2F
0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
30
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
@ A B C D E F G H I
40
41
42
43
44
45
46
47
48
49
P Q R S T U V W X Y
50
`
60
52
53
a b
62
63
51
61
p q
70
71
r
72
Ç ü é
80
81
82
c
54
58
d e
f66 g67
65
68
64
74
É æ Æ ô
84
91
92
á
í
ó ú ñ
A1
A2
75
93
A3
85
x y
z
{
7A
7B
E6
87
94
A4
95
F6
97
A5
A6
A7
Á
Â
ÁB7
B5
B6
C0
C1
C2
C3
C4
C5
C6
D ÊD2 ËD3 ÈD4
D5
D6
D1
ã Ã
Í
Ó ß Ô Ò õ Õ µ
-
F0
F1
F2
3
4
F3
88
98
89
8A
ï
8B
E4
E5
E6
¶
§
÷
F4
F5
F6
C7
Î
D7
99
4C
\
5C
4D
4E
4F
5E
5F
]
5D
-
l m
n6E o6F
6D
6C
}
7C
î
8C
7D
ì
8D
˜
7E
7F
Å
Ä 8F
8E
£ Ø X ƒ
9A
9B
9C
9D
® ¬
A9
AA
1/
2
AB
1/
4
AC
AD
B8
B9
BA
BB
BC
BD
BE
BF
C8
C9
CA
CB
CC
CD
CE
CF
D9
DA
DB
DC
DD
DE
Ñ a o ¿
B4
E3
79
å ç ê ë è
B3
E2
k
6B
78
77
B2
E1
j
6A
5B
D6
B1
E0
i
69
Z [
5A
v w
B0
D0
h
59
K L M N O
4B
ö ò û ù ÿ Ö Ü ø
90
A0
u
â ä à
83
56
57
s t
73
55
J
4A
A8
©
Ï
D8
ρ ρ Ú Û Ù y´
E7
E8
E9
EA
EB
F7
F8
F9
FA
FB
1
EC
3
FC
i
9E
9F
AE
AF
¢ ¥ ¬
Ì
´ Y
ED
2
FD
DF
´
EE
EF
FE
FF
3XXXU.056
Extended Character Sets
Each internal font in the printer has a different character set associated
with it as shown in the following tables. The hex codes accompany each
character. You must set the serial port communication to 8 data bits to use
the extended character sets.
86
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix B— Character Sets
Characters in Fonts
c0
7 x 9 Standard
c1
7 x 11 OCR
c2
10 x 14 Standard
ØØ
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Ø7
Ø8
Ø9
ØA
ØB
ØC
ØD
ØE
ØF
1Ø
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
2Ø
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
3Ø
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
4Ø
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
5Ø
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
6Ø
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
7Ø
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
8Ø
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
9Ø
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
9E
9F
AØ
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
BØ
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
CØ
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
DØ
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
EØ
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
FØ
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
3XXXU.057
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
87
Appendix B— Character Sets
Characters in Font
c7
5 x 7 Standard
ØØ
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Ø7
Ø8
Ø9
ØA
ØB
ØC
ØD
ØE
ØF
1Ø
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
2Ø
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
3Ø
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
4Ø
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
5Ø
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
6Ø
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
7Ø
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
8Ø
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
9Ø
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
9E
9F
AØ
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
BØ
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
CØ
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
DØ
D1
D2
D3
D4
D5
D6
D7
D8
D9
DA
DB
DC
DD
DE
DF
EØ
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
FØ
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
3XXXU.058
88
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix B— Character Sets
Characters in Fonts
c20
8 point
c21
12 point
c22
20 point
c25
Swiss Mono 721 standard outline font
ØØ
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Ø7
Ø8
Ø9
ØA
1Ø
11
12
13
14
15
16
17
18
19
1A
ØB
ØC
ØD
ØE
ØE
1B
1C
1D
1E
1F
/
+
!
" # $ % & ’
(
)
,
-
.
2Ø
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
0
1
2
3
4
5
6
7
8
9
:
;
<
=
>
?
3Ø
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
@
A
B
C D E
F
G H
I
J
K
L
M N O
4Ø
41
42
43
45
46
47
49
4A
4B
4C
4D
4E
4F
\
]
ˆ
_
44
P
Q R S
T
U V
5Ø
51
52
53
54
55
56
`
a
b
c
d
e
f
48
*
W X
Y
Z
[
57
58
59
5A
5B
5C
5D
5E
5F
g
h
i
j
k
l
m n
o
6C
6D
6E
6F
}
∼
6Ø
61
62
63
64
65
66
67
68
69
6A
6B
p
q
r
s
t
u
v
w x
y
z
{
7Ø
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
8Ø
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
9Ø
91
92
93
94
95
96
97
9A
9B
9C
9D
AØ
¡
¢
£
¤
¥
A1
A2
A3
A4
A5
±
BØ
B1
2
B2
3
B3
À
Á
 Ã
CØ
C1
C2
D Ñ
´
B4
Ä
|
|
A6
µ
¶
B5
B6
98
99
§
¨
©
A7
A8
A9
.
B7
Ç
B8
Å Æ Ç È
1
B9
a
AA
0
BA
É Ê
C9
CA
¬
AB
AC
AD
AE
AF
»
1
4
1
2
3
4
¿
BB
BC
BD
BE
BF
Ë
Ì
Í
Î
Ï
CC
CD
CE
CF
Ü Y´
I
ß
DC
DD
DE
DF
ë
ì
í
î
ï
ED
EE
EF
CB
C6
C7
C8
Ò Ó Ô Õ
Ö
×
Ø Ù
D6
D7
D8
D8
DA
DB
ç
è
é
ê
C4
9F
-
«
C5
C3
-
9E
®
Ú Û
DØ
D1
D2
D3
D4
D5
à
á
â
ã
ä
å æ
EØ
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
o~
ñ
ò
ó
ô
õ
ö
÷
ø
ù
ú
û
ü
y´
Io
ÿ
FØ
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
3XXXU.059
Note: The 3400A needs the 128K expanded memory option to support
font C25.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
89
Appendix B— Character Sets
Characters in Font
c23
OCR A
ØØ
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Ø7
Ø8
Ø9
ØA
ØB
ØC
ØD
ØE
ØE
1Ø
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
2Ø
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
3Ø
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
4Ø
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
5Ø
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
6Ø
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
7Ø
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
8Ø
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
9Ø
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
9E
9F
AØ
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
BØ
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
CØ
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
DØ
D1
D2
D3
D4
D5
D6
D7
D8
D8
DA
DB
DC
DD
DE
DF
EØ
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
FØ
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
3XXXU.060
90
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix B— Character Sets
Characters in Font
c24
OCR B Size 2
ØØ
Ø1
Ø2
Ø3
Ø4
Ø5
Ø6
Ø7
Ø8
Ø9
ØA
ØB
ØC
ØD
ØE
ØE
1Ø
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
2Ø
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
3Ø
31
32
33
34
35
36
37
38
39
3A
3B
3C
3D
3E
3F
4Ø
41
42
43
44
45
46
47
48
49
4A
4B
4C
4D
4E
4F
5Ø
51
52
53
54
55
56
57
58
59
5A
5B
5C
5D
5E
5F
6Ø
61
62
63
64
65
66
67
68
69
6A
6B
6C
6D
6E
6F
7Ø
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
7E
7F
8Ø
81
82
83
84
85
86
87
88
89
8A
8B
8C
8D
8E
8F
9Ø
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
9E
9F
AØ
A1
A2
A3
A4
A5
A6
A7
A8
A9
AA
AB
AC
AD
AE
AF
BØ
B1
B2
B3
B4
B5
B6
B7
B8
B9
BA
BB
BC
BD
BE
BF
CØ
C1
C2
C3
C4
C5
C6
C7
C8
C9
CA
CB
CC
CD
CE
CF
DØ
D1
D2
D3
D4
D5
D6
D7
D8
D8
DA
DB
DC
DD
DE
DF
EØ
E1
E2
E3
E4
E5
E6
E7
E8
E9
EA
EB
EC
ED
EE
EF
FØ
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
FC
FD
FE
FF
3XXXU.061
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
91
Appendix B— Character Sets
92
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
C
Communications Reference
This chapter provides communications reference information. This
chapter covers these topics:
• Communications protocols
• Communications interfaces
• Printer serial port
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
93
Appendix C— Communications Reference
Communication Protocols
Communication protocols are important because they determine the
transmission standards for communication between the printer and the
host. The printer and the host must use the same protocol and parameters
to communicate properly. The printer supports the flow control and block
transfer protocols described in the next sections. All of these protocols are
point-to-point except Multi-Drop. Application programs and/or ROM
BIOS determine which protocols your computer can support. For more
detailed information, refer to the Intermec Data Communications Reference
Manual (P/N 044737).
Intermec Standard Protocol
Intermec Standard protocol is a proprietary block transfer/status response
protocol. For each block sent, the host must wait for the appropriate
response before sending the next block (<DC1>). Except for single
character status commands (<ENQ> and <VT>), Standard protocol
transmits characters in message blocks beginning with the start of text
(<STX>) character and ending with the end of text (<ETX>) character.
Message blocks can be up to 255 characters, including the start of text and
end of text characters. The printer auto-discriminates between Standard,
Polling Mode D, and Multi-Drop protocols.
The printer returns its highest priority status when it receives a valid block
(<STX> data <ETX>) or when it receives the status request command
<ENQ>. When the printer receives the status dump command (<VT>),
the printer returns all active status. The printer status response time ranges
from 30ms to 100ms depending on the complexity of the received message
block. In the case of a transmission error, the printer responds with a
<NAK> and discards the entire message block.
The table below shows printer status conditions in descending order of
priority, status response characters, and pin 11/20 states:
Intermec Standard Protocol Printer Status Conditions
Printer Status
Buffer already full
94
Character
GS
Pin 11/20
Busy
Ribbon fault
US
Busy
No label stock
EM
Busy
Buffer now full
DC3
Busy
Printhead hot
SI
Busy
Offline (paused)
DC3
Busy
Label at strip pin
FS
Ready
Skipping
DC1
Ready
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix C— Communications Reference
Intermec Standard Protocol Printer Status Conditions (continued)
Printer Status
Printing
Character
DC1
Pin 11/20
Ready
Ready/Online
DC1
Ready
Note: Do not confuse the Ready/Printing Buffer now full <DC3> status
with the XON/XOFF characters <DC1> and <DC3>.
When the printer returns Buffer Now Full (<DC3>) status, it accepts the
currently received message block. At this time, the printer can accept short
messages to allow parsing of immediate commands such as Reset (<DLE>)
or Cancel Batch Printing (<EM>). However, if the printer responds with a
<GS> to any message block, the buffer is already full and the printer
discards the entire message block.
XON/XOFF Protocol (Software and Hardware Flow Control)
The XON/XOFF protocol stops the host from sending data when the
printer buffer fills up and starts the host again when the buffer empties.
When you select this protocol, you concurrently enable software and
hardware flow control. Software flow control uses the ASCII characters
<DC1> (XON) and <DC3> (XOFF) to start and stop the flow of data
from the host to the printer. Hardware flow control uses pin 11 or pin 20
(internally connected together) on the printer’s serial port to indicate
“Ready” or “Busy” for data flow control. As with Standard protocol,
<STX> and <ETX> enclose data. Status responses conform to the table
above except that <DC2> is substituted for <DC1> and <DC4> is
substituted for <DC3>.
The printer does not restrict the message length for XON/XOFF protocol.
That is, the printer processes information as it is being downloaded and
stops when there is no more information. There is no restriction on the
number of characters that can be sent down at a time. <STX> and <ETX>
are optional characters.
Pin 11/20 reports “Ready” and a <DC1> (XON) is transmitted when the
printer finishes reloading at power-up. Pin 11/20 reports “Busy” when the
printer’s input buffer fills with 768 bytes of data. If the host ignores pin
11/20 and continues to transmit data, the printer transmits a <DC3>
(XOFF) after receiving 15 additional characters. The printer continues to
transmit a <DC3> after every 15 characters received if the host continues
to transmit data. Data integrity is not guaranteed if this happens.
Pin 11/20 becomes “Ready” when the printer has transferred all the data
from the input buffer. If the printer transmitted a <DC3>, it transmits a
<DC1> (XON) and the host may resume transmission. When you switch
the printer offline, pin 11/20 becomes “Busy” and it transmits a <DC3>.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
95
Appendix C— Communications Reference
When you switch the printer online (and the input buffer is empty), pin
11/20 becomes “Ready” and it transmits a DC1.
Printer XON/XOFF Operation
# of Bytes Received
Do not care
Online/Offline
Offline
Pin 11/20
Busy
Transmit
DC3
768
Online
Busy
768 + each 15 thereafter
Online
Busy
DC3
Buffer Empty
Online
Ready
DC1 (if DC3 was sent)
XON/XOFF, No Status Protocol
This protocol is identical to XON/XOFF protocol except that status is not
returned after each message received. However, status is still returned for
the status request (<ENQ>) and the status dump (<VT>) commands.
Polling Mode D
Polling Mode D is a block transfer protocol that transmits data in blocks
of up to 255 characters, including protocol overhead. For Polling Mode D,
the host/concentrator is responsible for asking the printer for data it might
have (polling) and requesting to send data to the printer (selecting). The
blocks are framed with LRC characters for additional data integrity.
Polling Mode D is normally used for point-to-point networks that connect
the printer to an Intermec port concentrator (RS-232 or RS-422 are
acceptable).
This protocol is the default setting for the printer. Return the protocol
setting to Polling Mode D by setting the printer DIP switches to the
factory default settings (9600, E, 7, 1).
Multi-Drop Protocol
Use Multi-Drop protocol to connect up to 32 devices to an Intermec
controller on a four-wire RS-485 (two twisted pair). This protocol is
similar to Polling Mode D except each device has a unique address (POL
and SEL character). You must use an RS-485, which is automatically
enabled when you enable Multi-Drop. Be sure to specify a unique address
for the printer and verify that the baud rate is between 2,400 and 19,200.
User-Defined Protocol
The printer provides the capability to change protocol characters.
However, the user may not define their own protocol. You can substitute
characters you want to use as protocol characters, but the rules for the
chosen protocol do not change. The printer does not use any protocol
characters that you replace with the NUL character. One table of protocol
96
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix C— Communications Reference
characters exists. You may redefine these characters to create a table that all
of the protocols can use. One possibility for the user to redefine protocol
characters might be the replacement of control characters with printable
characters.
Note: Please use caution when replacing control characters with printable
characters. You cannot replace one control character with more than one
printable character.
The following table lists the protocol characters that you can redefine and
the protocols they affect:
Protocols Affected by Redefining Characters
Character
SELECT IN
Protocol Affected
POL MODE D, MULTI-DROP
POLL IN
POL MODE D, MULTI-DROP
RES IN
POL MODE D, MULTI-DROP
REQ IN
POL MODE D, MULTI-DROP
SOM IN
STD, POL MODE D, MULTI-DROP, XON/XOFF
EOM IN
STD, POL MODE D, MULTI-DROP, XON/XOFF
AFF IN
POL MODE D, MULTI-DROP
NEG IN
POL MODE D, MULTI-DROP
DLE IN
STD, POL MODE D, MULTI-DROP, XON/XOFF
XON IN
XON/XOFF
XOFF IN
XON/XOFF
SELECT OUT
MULTI-DROP
POLL OUT
MULTI-DROP
RES OUT
POL MODE D, MULTI-DROP
REQ OUT
POL MODE D, MULTI-DROP
SOM OUT
POL MODE D, MULTI-DROP
EOM OUT
POL MODE D, MULTI-DROP
AFF OUT
POL MODE D, MULTI-DROP
NEG OUT
STD, POL MODE D, MULTI-DROP
DLE OUT
STD, POL MODE D, MULTI-DROP
XON OUT
XON/XOFF
XOFF OUT
XON/XOFF
PROTO-CMD 1
STD, XON/XOFF
PROTO-CMD 2
STD, XON/XOFF
TIMEOUT ON EOM
POL MODE D, MULTI-DROP
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
97
Appendix C— Communications Reference
Host Requirements
Your printer has the following hardware and software requirements:
• The host computer must use the American Standard Code for
Information Exchange (ASCII) for data communications.
• A serial port must be available on the host if you are connecting directly
to the printer.
• The host must support at least one of the following data
communications interfaces: RS-232, RS-422, or RS-485.
For information on configuring the host computer, port concentrator, or
network controller, see the reference manual for the controlling device.
Communications Boundaries
The information below applies to all protocols that the printer supports.
Communications Boundaries
Parameter
Message delay
Maximum Capacity
9999 milliseconds
Character delay
9999 milliseconds
Message block size
255 characters (including STX and ETX characters)
Unlimited block size for XON/XOFF
Device address number
(Multi-Drop only)
A to Z, 0 to 5
Communications Interfaces
The printer supports serial communications with the following interfaces:
• RS-232
• RS-422
• RS-485
The following sections describe these interfaces. See the Data
Communications Reference Manual (P/N 044737) for more detailed
information.
RS-232 Serial Interface
Use the RS-232 serial interface in all asynchronous point-to-point full- or
half-duplex direct data communications or modem control. The printer
cable must have the pin assignments for an RS-232 serial interface shown
in the table on the next page.
98
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix C— Communications Reference
RS-422 Serial Interface
Use the RS-422 interface in long line point-to-point direct connect
installations. The printer cable must have the pin assignments for an RS422 serial interface shown in the table on this page.
RS-485 Serial Interface
Use the RS-485 serial interface for Multi-Drop installations only. The
printer cable must have the pin assignments for an RS-485 serial interface
shown in the table on this page.
RS-232, RS-422, and RS-485 Serial Interface Pin Assignments
Interface
RS-232/422/485
Pin
1
Name
Chassis Ground
(GND)
Operation
Connect to pin 1, chassis ground, of connected device.
RS-232
2
Transmit Data
(TD)
Output: Connect to receive data pin of connected device.
RS-232
3
Receive Data
(RD)
Input: Connect to transmit data pin of connected device.
RS-232/422/485
4
Request to Send
(RTS)
Output: When you use a modem, connect to modem RTS
pin. The modem sets RTS to true before transmission. The
printer sets RTS to false after transmission.
RS-232/422/485
5
Clear to Send
(CTS)
Input: When you use a modem, connect to modem CTS pin.
The modem must set CTS true before the printer transmits
data. If not connected, CTS sets itself true.
RS-232/422/485
7
Signal Ground
(SG)
To enable communications, connect to signal ground of
connected device. Completes circuit for all RS-232 signals.
RS-232/422/485
11
Printer Status
(PS)
Output: When not using software flow control
(XON/XOFF), connect to input of connected device (for
example, CTS). Indicates printer mechanical status and status
of printer input buffer.
RS-422/485
13
Input B
Input: Serial differential data to the printer.
RS-422/485
14
Output A
Output: Serial differential data from the printer.
RS-422/485
16
Input A
Input: Serial differential data to the printer.
RS-422/485
19
Output B
Output: Serial differential data from the printer.
RS-232/422/485
20
Data Terminal
Ready (DTR)
Output: When you use a modem, connect to modem DTR
pin.
When using Intermec Standard Protocol, this pin indicates
that the printer is switched on.
When using XON/XOFF or hardware flow control, this pin
indicates the printer mechanical status and the status of the
printer input buffer.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
99
Appendix C— Communications Reference
Shield
25-Pin (Socket) D-Sub
Metal Backshell
25-Pin (Plug) D-Sub
Metal Backshell
Chassis Ground
1
1
Chassis Ground
Transmitted Data
2
3
Received Data
Received Data
3
2
Transmitted Data
Request to Send
4
Carrier Detect
Clear to Send
5
8
Data Set Ready
6
20 Data Terminal Ready
Ground
7
7
Ground
Data Terminal Ready 20
6
Data Set Ready
Carrier Detect
4
8
5
PC
3XXXU010.eps
Clear to Send
Printer
RS-232 null modem cable for PC/XT: This illustration shows the pin assignments for
the RS-232 null modem cable for the PC/XT (P/N 048668).
Note: The metal backshell is connected directly to the shield to achieve
electrostatic discharge (ESD) immunity.
Shield
9-Pin (Socket) D-Sub
Metal Backshell
25-Pin (Plug) D-Sub
Metal Backshell
1
Chassis Ground
Received Data
2
2
Transmitted Data
Transmitted Data
3
3
Received Data
Clear to Send
8
8
Carrier Detect
Request to Send
7
Data Terminal Ready
4
6
Data Set Ready
Data Set Ready
6
20 Data Terminal Ready
Carrier Detect
1
5
Clear to Send
4
Request to Send
Ground
5
7
Ground
PC
3XXXU011.eps
Printer
RS-232 null modem cable for PC/AT: This illustration shows the pin assignments for
the RS-232 null modem cable for PC/AT (P/N 048693).
Note: The metal backshell is connected directly to the shield to achieve
electrostatic discharge (ESD) immunity.
100
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Appendix C— Communications Reference
Shield
25-Pin (Plug) D-Sub
Metal Backshell
25-Pin (Socket) D-Sub
Metal Backshell
Chassis Ground
1
Transmitted Data
2
Received Data
3
Request to Send
4
Clear to Send
5
Data Terminal Ready
20
Signal Ground
➤
➤
➤
➤
➤
1
Chassis Ground
2
Transmitted Data
3
Received Data
4
Request to Send
5
Clear to Send
20 Data Terminal Ready
Signal Ground
7
7
Printer
Modem
3XXXU012.eps
Straight through DTE to DCE cable: This illustration shows the pin assignments for
the straight through DTE to DCE cable used with a modem (P/N 043237S). If you find
that you are losing data, you may need to isolate the chassis ground from one of the
two devices by connecting it to the shield.
Note: The metal backshell is connected directly to the shield to achieve
electrostatic discharge (ESD) immunity.
Shield
1
+
-
Input RxDA 16
➤
➤
-
Output TxDA 14
Output TxDB 19
➤
➤
Input RxDB 13
1
+
Printer
3XXXU013.eps
19
14
16
13
Host
RS-422 serial interface: This illustration shows the pin assignments for the RS-422
serial interface. The host in this case includes Intermec products that support RS-422.
Non-Intermec controllers may have different pin assignments.
Note: Connect pin 1 to shield at one end only.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
101
Appendix C— Communications Reference
Printer Serial Port
The rear panel of the printer contains the serial port connector. It is a 25pin D-style subminiature receptacle. The port is wired as a data terminal
equipment (DTE) device.
DTR
25
13
24
12
23
11
22
10
21
9
20
8
19
7
18
6
17
5
RTS
16
4
RD
15
3
14
2
PS
SG
CTS
TD
1
GND
3XXXU.063
Serial port pin assignments: This illustration shows the serial port pin assignments.
102
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
D
Full ASCII Table
This chapter contains these tables:
• Full ASCII table
• Full ASCII control characters table
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
103
Appendix D— Full ASCII Table
Full ASCII Table
This table lists the ASCII characters and their binary, hexadecimal,
decimal, and Code 39 equivalents.
Full ASCII Table
Binary0
00000000
Hex1
00
Dec2
00
C393
%U
Char4
NUL
Binary0
00100010
Hex1
22
Dec2
34
C393
/B
Char4
"
00000001
01
01
$A
SOH
00100011
23
35
/C
#
00000010
02
02
$B
STX
00100100
24
36
/D
$
00000011
03
03
$C
ETX
00100101
25
37
/E
%
00000100
04
04
$D
EOT
00100110
26
38
/F
&
00000101
05
05
$E
ENQ
00100111
27
39
/G
'
00000110
06
06
$F
ACK
00101000
28
40
/H
(
00000111
07
07
$G
BEL
00101001
29
41
/I
)
00001000
08
08
$H
BS
00101010
2A
42
/J
*
00001001
09
09
$I
HT
00101011
2B
43
/K
+
00001010
0A
10
$J
LF
00101100
2C
44
/L
,
00001011
0B
11
$K
VT
00101101
2D
45
/M
-
00001100
0C
12
$L
FF
00101110
2E
46
/N
.
00001101
0D
13
$M
CR
00101111
2F
47
/O
/
00001110
0E
14
$N
SO
00110000
30
48
/P6
0
00001111
0F
15
$O
SI
00110001
31
49
/Q
1
00010000
10
16
$P
DLE
00110010
32
50
/R
2
00010001
11
17
$Q
DC1
00110011
33
51
/S
3
00010010
12
18
$R
DC2
00110100
34
52
/T
4
00010011
13
19
$S
DC3
00110101
35
53
/U
5
00010100
14
20
$T
DC4
00110110
36
54
/V
6
00010101
15
21
$U
NAK
00110111
37
55
/W
7
00010110
16
22
$V
SYN
00111000
38
56
/X
8
00010111
17
23
$W
ETB
00111001
39
57
/Y
9
00011000
18
24
$X
CAN
00111010
3A
58
/Z
:
00011001
19
25
$Y
EM
00111011
3B
59
%F
;
00011010
1A
26
$Z
SUB
00111100
3C
60
%G
<
00011011
1B
27
%A
ESC
00111101
3D
61
%H
=
00011100
1C
28
%B
FS
00111110
3E
62
%I
>
00011101
1D
29
%C
GS
00111111
3F
63
%J
?
00011110
1E
30
%D
RS
01000000
40
64
%V
@
00011111
1F
31
%E
US
01000001
41
65
A
A
00100000
20
32
SP
SP5
01000010
42
66
B
B
00100001
21
33
/A
!
01000011
43
67
C
C
104
3400, 3440,and 3600 Bar Code Label Printer User’s Manual
Appendix D— Full ASCII Table
Full ASCII Table (continued)
Binary0
01000100
Hex1
44
Dec2
68
C393
D
Char4
D
Binary0
01100011
Hex1
63
Dec2
99
C393
+C
Char4
c
01000101
45
69
E
E
01100100
64
100
+D
d
01000110
46
70
F
F
01100101
65
101
+E
e
01000111
47
71
G
G
01100110
66
102
+F
f
01001000
48
72
H
H
01100111
67
103
+G
g
01001001
49
73
I
I
01101000
68
104
+H
h
01001010
4A
74
J
J
01101001
69
105
+I
i
01001011
4B
75
K
K
01101010
6A
106
+J
j
01001100
4C
76
L
L
01101011
6B
107
+K
k
01001101
4D
77
M
M
01101100
6C
108
+L
l
01001110
4E
78
N
N
01101101
6D
109
+M
m
01001111
4F
79
O
O
01101110
6E
110
+N
n
01010000
50
80
P
P
01101111
6F
111
+O
o
01010001
51
81
Q
Q
01110000
70
112
+P
p
01010010
52
82
R
R
01110001
71
113
+Q
q
01010011
53
83
S
S
01110010
72
114
+R
r
01010100
54
84
T
T
01110011
73
115
+S
s
01010101
55
85
U
U
01110100
74
116
+T
t
01010110
56
86
V
V
01110101
75
117
+U
u
01010111
57
87
W
W
01110110
76
118
+V
v
01011000
58
88
X
X
01110111
77
119
+W
w
01011001
59
89
Y
Y
01111000
78
120
+X
x
01011010
5A
90
Z
Z
01111001
79
121
+Y
y
01011011
5B
91
%K
[
01111010
7A
122
+Z
z
01011100
5C
92
%L
\
01101100
6C
108
+L
l
01011101
5D
93
%M
]
01111011
7B
123
%P
{
01011110
5E
94
%N
^
01111100
7C
124
%Q
|
01011111
5F
95
%O
_
01111101
7D
125
%R
}
01100000
60
96
%W
`
01111110
7E
126
%S
~
127
%T7
n8
01100001
61
97
+A
a
01100010
62
98
+B
b
01111111
7F
Notes for the Full ASCII Table
0
Bit positions are 76543210.
5
SP is the SPACE character.
1
Hexadecimal value.
6
The Code 39 characters /P through /Y may be interchanged with
the numbers 0 through 9.
2
Decimal value.
7
May be interchanged with %X or %Y or %Z.
3
Code 39 characters.
8
n is the DELETE character.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
105
Appendix D— Full ASCII Table
Full ASCII Control Characters Table
This table lists the ASCII control characters and their definitions.
Full ASCII Control Characters Table
106
Control
Character
ACK
Definition
Acknowledgment
Control
Character
FF
BEL
Bell
FS
File Separator
BS
Backspace
GS
Group Separator
CAN
Cancel
HT
Horizontal Tab
CR
Carriage Return
LF
Line Feed
DC1
Device Control 1 (XON)
NAK
Negative Acknowledge
DC2
Device Control 2
NUL
Null, or all zeroes
DC3
Device Control 3 (XOFF)
RS
Record Separator
DC4
Device Control
SI
Shift In
DEL
Delete
SO
Shift Out
DLE
Data Link Escape
SOH
Start of Heading
EM
End of Medium
SP
Space
ENQ
Enquiry
STX
Start of Text
EOT
End of Transmission
SUB
Substitute
ESC
Escape
SYN
Synchronous Idle
ETB
End Transmission Block
US
Unit Separator
ETX
End of Text
VT
Vertical Tab
Definition
Form Feed
3400, 3440,and 3600 Bar Code Label Printer User’s Manual
G
Glossary
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
107
Glossary
ASCII
American Standard Code for Information Interchange. A standard seven
bit code almost always transmitted with a parity bit for a total of eight bits
per character. ASCII was established by the American National Standards
Institute to achieve compatibility between various types of data
communication equipment. Equivalent to the International ISO 7-bit
code.
backing
Silicon release liner on media to which labels are attached until ready for
use.
bar code
A printed, machine-readable code that consists of parallel bars of varied
width and spacing.
batch takeup
A device that rewinds media; useful for printing batches of labels.
BEL
A command character that instructs the printer to return an error status
code.
character set
Refers to the letters, numerals, and symbols that support a particular
language (such as French, U.S., ASCII) or automatic identification
technology (such as Code 30, Codabar).
cloning
A procedure that copies the RAM contents (configuration, formats, fonts,
pages and graphics) from the memory of one printer to the memory of
another.
configuration
The current parameter settings that determine the operating characteristics
of the printer.
data file
The collection of data and printer commands that, when sent to the
printer, is merged with a format file to print a label.
Data Line Print mode
A mode of operation in which the printer prints each command
(accompanied by its ASCII code) that it receives from the host.
108
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Glossary
density
Number of data characters that can be represented in a linear unit of
measure. Often expressed in characters per inch.
direct thermal
A method of thermal printing in which images are printed when heat from
the thermal printhead produces a black mark on the media.
EAN
European Article Numbering; now also called IAN (International Article
Numbering). International standard bar code for retail food packages
corresponding to the Universal Product Code (UPC) in the United States.
Emulation mode
An operating mode in which the printer has the operating characteristics of
an 8636 or 8646 printer.
Feed/Pause
A printer control panel button that advances the media and causes the
printer to pause printing.
field
A graphic element that is the basic unit of a format. The four basic types of
fields are bar code, graphic, line, and text.
fixed data field
Bar code and text fields that never vary from one label to the next; the data
in a fixed field is a permanent part of the format.
fixed format
A format in which the data never varies from one label to the next, such as
a return address label. A fixed format needs no additional data to print a
label.
font
A character set of a given type size and style. See also character set.
font file
See soft font.
format file
a collection of printer commands and data that determines the
arrangement of fields on a label.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
109
Glossary
graphic
A bitmap picture downloaded to the printer by the host before printing.
HIBC
Health Industry Bar Code standard. A modified version of Code 39 that
has 43 characters, utilizes the Modulus 43 check character, and reserves
some character combinations for special usage.
human-readable
A character, number, or symbol printed in a font that can be read by a
human; as opposed to bar code symbology, which can only be read by a
machine. See text.
image bands
A portion of an image in the shape of a strip of the image. A certain
number of image bands are stored in memory before printing begins. This
method allows printing and imaging to take place simultaneously.
imaging
The process of generating a picture of the label in printer memory.
ips
Inches per second. A measurement of print speed that measures the
number of inches of media that is printed each second.
ISO
International Organization for Standardization. An internationally
accepted 7-bit character code. (The U.S. version is ASCII.)
label
The part of the media on which data is printed.
label format
The design of a bar code label; the arrangement of the text, lines, and bar
codes on a label.
label gap
The space between labels on die-cut label stock.
ladder
A method of bar code printing in which the bars in the bar code print one
at a time, in a series. The bar code appears along the length of the label.
110
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Glossary
margin
The distance between the edge of a label and where the printing starts on
that label. See also top of form.
media
The label stock on which the printer prints labels. Media can be made of
plain paper, polyester, thermally reactive paper, or other materials with
adhesive backing and ribbon.
mnemonic code
An acronym or abbreviation for a computer instruction, routine, or
format. For example, <STX> represents the start of text.
Multi-Drop protocol
A protocol capable of controlling communications between a single
controller and multiple devices.
OCR font
A font that is recognized by optical character recognition.
offline
The state in which the printer is not able to carry out two-way
communication with the host.
online
The state in which the printer is able to carry out two-way communication
with the host.
parallel
A communication scheme in which the bits of a byte are transferred
simultaneously over a multistrand cable.
parameters
The operating limits of the printer. Also, the variable information sent
with a command.
picket
A method of bar code printing in which all the bars are printed at once, in
parallel. The bar code appears across the width of the label.
pitch
(1) The number of characters printed in one horizontal inch determined
by the increment by which the printer platen moves. (2) Rotation of a bar
code symbol about an axis parallel to the direction of the bars.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
111
Glossary
point size
A unit of measure for font height; 72 points equals 1 inch as measured
from slightly above the top of the uppercase letters to slightly below the
bottom of the lowercase descenders.
Polling Mode D protocol
Polling Mode D is a protocol that allows devices and controllers to
exchange data in an “ask and receive” format. Use Polling Mode D to
connect multiple devices to a single multiport controller.
print speed
Measured in inches per second (ips), the rate at which media travels past
the printhead.
printhead
The mechanism inside the printer that prints. For example, the printhead
for the 3440 printer consists of 1792 thermal elements.
printhead elements
The parts of the printhead that print by placing a mark on the label when
heated. Each element is switched on and off separately in order to react
with the media or thermal transfer ribbon to create a mark on the label.
ready
The state in which the printer is able to print; the normal operating state
of the printer.
Ready/Busy line
Pin 11/20 of the rear panel connector. Indicates the printer is ready or not
ready.
RS-232
Widely recognized protocol standard for serial binary data interchange.
The standard covers the physical, electrical, and functional characteristics
of the interface.
RS-422
Standard for the voltage and impedance levels for serial data transmission
on balanced lines. Similar to RS-232, but handles larger distances and
faster communication.
RS-485
Standard for allowing multiple devices to share a common set of serial data
communication lines. The signaling is very similar to RS-422. The
maximum number of devices allowed is 32.
112
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Glossary
scan
To read a bar code with a device known as a scanner that converts optical
information into electrical signals.
selective transfer
A procedure that copies selected formats, fonts, graphics, or pages stored in
the memory of one printer to the memory of another.
self-strip
An internal device for the printer that presents each label after it is printed,
with the backing removed so it may be applied immediately. Self-strip is a
standard feature on the 3400, 3440, and 3600 printers.
sensitivity
The responsiveness of thermal media, or of thermal transfer ribbon, to
heat; it is determined by the time required for a unit measure of heat to
affect the media or ribbon.
serial
A communication scheme in which the bits of a byte are transferred one at
a time. Often serial transmission is used to link host computers to
terminals and PCs to printers.
soft font
A file stored in the printer to provide the ability to print text using fonts
that are not resident in the printer.
Standard protocol
A communications protocol capable of controlling communications
between two devices connected by a single data communication line.
symbology
A scheme for encoding data as a bar code. Code 39, Interleaved 2 of 5, and
Code One are examples of different symbologies.
thermal transfer
A method of printing by which heat from the printhead melts ink from
the ribbon onto media. The ink adheres to the media as it cools.
top of form
The point where printing can start on a label. Separated from the edge of
the label by the margin.
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
113
Glossary
UPC
Universal Product Code. A numeric, 12-digit bar code symbology used
extensively in retail, particularly the grocery industry.
User-Defined Characters (UDC)
See graphic.
User-Defined Fonts (UDF)
See soft font.
variable data field
Bar code and text fields that change from one label to the next.
XON/XOFF protocol
A protocol that stops the host from sending data when the printer buffer
fills up and starts it again when the buffer empties.
114
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
I
Index
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
115
Index
Numbers
2D symbologies
Code 16K, 82
Code 49, 82
Data Matrix, 82
Maxicode, 82
PDF417, 82
QR Code, 82
3400 printer
character sets, 71
cutter option, 79
dimensions, 71
fonts and graphics, 72
media specifications, 73
printhead specifications, 72
printing speed specifications, 72
ribbon specifications, 72
specifications, 71
3440 printer
character sets, 74
dimensions, 74
fonts and graphics, 75
media specifications, 75
memory specifications, 74
printhead specifications, 74
printing speed specifications, 74
ribbon specifications, 74
specifications, 74
3600 printer
character sets, 76
dimensions, 76
fonts and graphics, 77
media specifications, 77
memory specifications, 76
printhead specifications, 76
printing speed specifications, 76
ribbon specifications, 76
specifications, 76
86XX Emulation mode, 64
A
AC power receptacle, 4
adjustments
bias adjust screw, 48
darkness adjust control, 49
label mark sensor, 50
label rest point, 63
X forms adjust, 66
Y forms adjust, 67
Advanced mode, international character sets, 84
Alert LED, troubleshooting, 43
AS400, connecting to the printer, 10
ASCII
control characters table, 106
definition, 108
table, 104
116
B
backing, definition, 108
bar code, definition, 108
bar code symbologies
Codabar, 81
Code 11, 81
Code 128, 81
Code 2 of 5, 81
Code 39, 81
Code 93, 81
EAN, 81
Interleaved 2 of 5, 81
list of, 81
POSTNET, 81
UPC, 81
batch
printing, optimizing with image bands, 54
takeup option, 80
batch takeup, definition, 108
BEL, definition, 108
bias adjust screw
adjusting, 48
using for optimal print quality, 48
boundaries, communication, 98
C
cables
considerations in noisy electrical environments, 11
RS-232 schematics, 100
RS-422 schematic, 101
serial port, 9
straight through schematics, 101
centronics parallel interface option, 79
changing
core-locking brackets, 22
serial port settings, 13
character sets
3400 printer, 71
3440 printer, 74
3600 printer, 76
Advanced mode, 84
Code Page 850, 86
definition, 108
Emulation mode, 85
extended, 86
IBM translation, 85
international, 84
cleaning
drive roller, 36
label sensors, 38
media guides, 37
media path, 37
printer covers, 36
printhead, 34
schedule, 32
tear bar, 36
tools, 32
cloning, definition, 108
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Index
coax interface option, 79
Codabar, 81
Code 11, 81
Code 128, 81
Code 16K, 82
Code 2 of 5, 81
Code 39, 81
Code 49, 82
Code 93, 81
Code Page 850, character table, 86
communicating with the printer
using PrintSet, 29
using the printer command set, 29
using third-party software, 29
communications
boundaries, 98
host requirements, 98
interfaces, 98
IPL commands, using, 29
PrintSet, using, 29
protocols, 94
Multi-Drop, 96
Polling Mode D, 96
Standard, 94
user-defined, 97
XON/XOFF, 95, 96
specifications, 70
testing for, 13, 29
third-party software, using, 29
troubleshooting, 45, 58
configuration
definition, 108
printing test label, 29, 58
test label
hardware, 7
software, 26
troubleshooting, 43
configuration commands
changing from Test and Service mode, 61
Emulation mode, 64
label rest point, 63
X forms adjust, 66
Y forms adjust, 67
DIP switch settings, 61
configuring the serial port, 12
connecting
printer to a mainframe, 11
printer to a network, 10
printer to a PC
using the parallel port, 10
using the serial port, 9
printer to an AS400, 10
printer to system
using the parallel port, 8
using the serial port, 8
copying formats, pages, fonts, or graphics, See selective
transfer
core-locking brackets, changing, 22
cover
cleaning, 36
removing, 5
cutter option, 3400, 79
D
darkness adjust control
setting, 49
using for optimal print quality, 49
data file, definition, 108
Data Line Print, 58
entering, 58
using to test the operation of the printer, 58
using to troubleshoot printer, 58
Data Line Print mode, definition, 108
data loss
checking for communication problems, 46
preventing, 46
Data Matrix, 82
density, definition, 109
dimensions
3400 printer, 71
3440 printer, 74
3600 printer, 76
DIP switch settings
changing, 12
configuration commands, 61
dot increments, moving, 61
Emulation mode, setting, 64
label rest point, adjusting, 63
table, serial port, 13
test and service, 57
direct thermal, definition, 109
dot increments, setting the number of, 62
downloading, definition, 28
drive roller, cleaning, 36
E, F
EAN
definition, 109
described, 81
EasyLAN 10i2 adapter accessory, 79
electrical requirements, 70
empty/pause LED, troubleshooting, 45
Emulation mode
definition, 109
international character sets, 85
setting, 64
environment, specifications, 70
extended character sets, 86
fanfold media, loading, 6
faults, media or system, 17
Feed/Pause button
definition, 109
functions of, 17, 18
illustrated, 16
using, 17, 18
field, definition, 109
fixed data field, definition, 109
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
117
Index
fixed format, definition, 109
flow control, 95
fonts
3400 printer, 72
3440 printer, 75
3600 printer, 77
copying to another printer, See selective transfer
definition, 109
described, 75
extended character sets, 86
file, definition, 109
tables, extended character sets, 86
formats
copying to another printer, See selective transfer
file, definition, 109
positioning with DIP switches, 65
forms adjust
positioning the label format, 65
X forms, setting, 66
Y forms, setting, 67
front panel
LEDs, 16
understanding, 16
full ASCII
control characters table, 106
table, 104
G, H
graphics
3400 printer, 72
3440 printer, 75
3600 printer, 77
copying to another printer, See selective transfer
defined, 75
definition, 110
hardware configuration test label, printing, 7
HIBC, definition, 110
host requirements, communications, 98
human-readable, definition, 110
I
IBM translation, character table, 85
image bands
definition, 110
description, 53
function, 53
optimizing, 53
optimizing with print speed, 54
using for batch printing, 54
imaging, definition, 110
inspecting the printer, 32
installation
network, 10
printer, 4
interfaces
communications, 98
EasyLAN 10i2 adapter accessory, 79
RS-232, 98
118
RS-422, 99
RS-485, 99
Interleaved 2 of 5, 81
Intermec Standard protocol, described, 94
international character sets, 84
advanced, 84
Code Page 850, 86
Emulation mode, 85
IBM translation, 85
IPL commands, using to communicate, 29
ips, definition, 110
ISO, definition, 110
L
label
definition, 110
format
definition, 110
positioning along the length of label, 66
positioning parallel along width of label, 67
gap, definition, 110
mark sensor, adjusting, 50
rest point
adjusting with DIP switches, 63
setting dot increments, 61
sensors, cleaning, 38
ladder, definition, 110
LED
front panel, 16
indicators, 16
media or system faults, 17
over-temperature condition, 17
understanding, 16
loading
fanfold media, 6
media for self-strip, 20
media for straight-through printing, 18
roll media, 18
thermal transfer ribbon, 23
M
mainframe, connecting to the 3400, 11
maintenance
location of parts to be maintained, 33
schedule, 32
margin, definition, 111
Maxicode, 82
media
definition, 111
fault, troubleshooting, 43
guides, cleaning, 37
loading fanfold, 6
loading in the printer, 18
path, cleaning, 37
specifications
3400 printer, 73
3440 printer, 75
3600 printer, 77
media or system faults, 17
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Index
media sensitivity number
description of, 25
setting for Intermec media and ribbon, 26
settings table
direct thermal media, 27
thermal transfer media, 28
memory
expansion option, 78
3400 printer, 78
3440 printer, 78
3600 printer, 78
increasing amount available, 52
increasing amount available in printer, 59
resetting, 59
returning printer to default settings, 59
specifications
3440 printer, 74
3600 printer, 76
usage, 51
limitations, 52
problems, 52
mnemonic code, definition, 111
Multi-Drop protocol
definition, 111
described, 96
N, O
network
connecting to the printer, 10
installation, 10
OCR font, definition, 111
offline, definition, 111
On/Off switch, 4
online, definition, 111
opening the printer, 5
operation problems, troubleshooting, 42
options
communication interface, 79
finishers, 79
memory expansion, 78
printer, 78
over-temperature condition, 17
P
pages, copying to another printer, See selective transfer
parallel
definition, 111
interface, pin descriptions, 80
port, using to connect the printer to a PC, 10
parameters, definition, 111
PDF417, 82
picket, definition, 111
pin descriptions, parallel interface, 80
pitch
definition, 111
test label, printing, 58
plastic core-locking brackets, changing, 22
plugging in the printer, 4
point size, definition, 112
Polling Mode D protocol
definition, 112
described, 96
POSTNET, 81
power loss, troubleshooting, 42
print quality
correcting, 48
darkness adjust control, adjusting with, 49
maintaining, 48
optimizing, 48
printing test label, 58
troubleshooting, 44, 45
understanding, 48
print speed
adjusting for use with image bands, 54
definition, 112
printer
cleaning, 32
communication problems, 45
communications, 28, 70
components
back view, 3
front view, 3
connecting
AS400, 10
mainframe, 11
network, 10
PC, 9
cover
cleaning, 36
removing, 5
features, described, 2
inspection, 32
installation, 4
maintenance, 32
memory, using efficiently, 51
opening, 5
operation
testing, 58
troubleshooting, 42, 58
options, 78
batch takeup, 80
centronics parallel interface, 79
coax interface, 79
cutter, 79
EasyLAN 10i2 adapter accessory, 79
twinax interface, 79
plugging in, 4
ports, illustrated, 9
RAM, understanding, 51
serial port, 102
specifications, 70 to 77
printhead
cleaning, 34
definition, 112
elements, definition, 112
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
119
Index
printhead (continued)
specifications
3400 printer, 72
3440 printer, 74
3600 printer, 76
printing
batch, optimizing, 54
hardware configuration label, 7
increasing speed, 53
self-strip, 20
software configuration label, 26
speed
3400 printer, 72
3440 printer, 74
3600 printer, 76
straight-through, 18
test label, 29
PrintSet, 29
problems
communication, 45
print quality, 44, 45
printer operation, 42
protocols, 94
Standard, 94
user-defined, 97
XON/XOFF, 95, 96
Protocols
Multi-Drop, 96
Polling Mode D, 96
Q, R
QR Code, 82
quality, problems, troubleshooting, 44, 45
RAM, using, 51
ready, definition, 112
Ready/Busy line, definition, 112
removing the printer cover, 5
requirements
electrical, 70
hardware and software, 98
resetting, memory, 59
ribbon
loading, 23
specifications
3400 printer, 72
3440 printer, 74
3600 printer, 76
RS-232
definition, 112
serial interface, described, 98
RS-422
definition, 112
serial interface, described, 99
RS-485
definition, 112
serial interface, described, 99
120
S
scan, definition, 113
schedule of maintenance, 32
selective transfer
definition, 113
described, 58
self-strip
definition, 113
printing
described, 20
specifications, 71
sensitivity, definition, 113
serial
definition, 113
port
cables, 9
configuration, 12
description, 102
settings, changing, 13
using to connect a PC to the 3400, 9
setting
dot increments, number of, 62
Emulation mode, 64
media sensitivity number, 25
soft font, definition, 113
software configuration label, printing, 26
specifications
3400 printer, 71
3440 printer, 74
3600 printer, 76
printer, 70 to 77
speed, printing
3400 printer, 72
3440 printer, 74
3600 printer, 76
Standard protocol
definition, 113
described, 94
straight-through printing, 18
symbologies
Codabar, 81
Code 11, 81
Code 128, 81
Code 16K, 82
Code 2 of 5, 81
Code 39, 81
Code 49, 82
Code 93, 81
Data Matrix, 82
EAN, 81
Interleaved 2 of 5, 81
Maxicode, 82
PDF417, 82
POSTNET, 81
QR Code, 82
UPC, 81
symbology, definition, 113
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
Index
T
tear bar, cleaning, 36
Test and Service mode
86XX Emulation mode, 64
changing configuration commands from, 61
Data Line Print, 58
DIP switch settings, 57
entering, 56
exiting, 56
label rest point, adjusting in, 63
memory reset, 59
printing test labels, 58
selective transfer, 58
using forms adjust, 65
X forms adjust, 66
Y forms adjust, 67
test label
example of hardware configuration, 7
printing, 29, 58
thermal transfer
definition, 113
ribbon, loading, 23
third-party software, 29
throughput, increasing, 53
top of form, definition, 113
transfer, selective, 58
troubleshooting, 41
checklist, 42
communication problems, 45
print quality problems, 44, 45
printer operation problems, 42
twinax interface option, 79
U, V, X, Y
UDC, definition, See graphic, definition
UDF, definition, See soft font, definition
UPC
definition, 114
described, 81
uploading, definition, 28
user-defined protocol, 97
variable data field, definition, 114
X forms adjust
default origin, 66
setting dot increments, 61
setting with DIP switches, 66
See also top of form, set command
XON/XOFF
definition, 114
no status protocol, 96
protocol, 95
Y forms adjust
default origin, 66
setting dot increments, 61
setting with DIP switches, 67
yellow LED, troubleshooting, 45
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
121
Index
122
3400, 3440, and 3600 Bar Code Label Printer User’s Manual
blank page
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
3400, 3440, and 3600 Bar Code Label Printer User's Manual
*065145-002*
P/N 065145-002