Download Slick V3.3 Computer Accessories User Manual

ISPF Line Commands
lines are to be converted. The second (block) form (MDMD or MDD) is placed on the first and last lines of
the block to be converted.
See Also
ISPF Line Commands, ISPF Line Command COLS, ISPF Line Command BNDS, ISPF Line Command MASK, ISPF Line Command TABS
ISPF Overlay Lines O and OO for blocks
Usage
• O [n] - Overlay n lines starting with the line with the command.
• OO - Overlay a block of lines, must match another OO.
Remarks
Identifies one or more lines over which the copy or move block is to be overlaid. Text is only overlaid within the column boundaries. If the copy or move block has less lines than the overlay, it is repeated until it
fills the entire overlay block.
There are two forms to this command. The first form (O [n]) specifies that the line and the subsequent n1 lines are to be overlaid. The second (block) form (OO) is placed on the first and last lines of the block to
be overlaid.
You are allowed to specify multiple A, B, or O line commands to have the same copy or move block inserted or overlaid in multiple places.
See Also
ispf_copy, ispf_paste, ISPF Line Command A, ISPF Line Command B, ISPF Line Command Copy,
ISPF Line Command Move, ISPF Line Command Overlay
ISPF Repeat Lines
Usage
• R [n] - Repeat the line with the command n times.
• RR [n] - Repeat the block n times, must match another RR.
Remarks
Specify lines to be repeated immediately following this line or block. There are two forms to this command. The first form (R[n]) specifies that the line is to be repeated n times. The second (block) form
(RR[n]) is placed on the first and last lines of the block to be repeated n times.
See Also
ISPF Line Command A, ISPF Line Command B, ISPF Line Command Copy
ISPF Expose Next Level of Code S and SS
513