Download Kenmore 790.7865 Range User Manual

®
Gas
stufa
a
Models, Modelos
as
790. 7865*,
7872*,
7866*,
7873*,
7867*,
7876*,
7868*,
7965*
7869*,
7871"
* -- color number, nQmero de color
www.sears.com
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
pin 316462439 (0707)
Table of Contents
Product Record
Free-Standing Range Warranty ........................................... 2
Product Record ...................................................................
2
iMPORTANT SAFETY iNSTRUCTiONS .......................... 3-5
Protection Agreements ........................................................
6
Range Features ..................................................................
7
Before Setting Oven Controls ..............................................
8
Setting Surface Controls .....................................................
9
Oven Control Functions .....................................................
10
Setting Oven Controls ..................................................
11-15
Setting Warmer Drawer Controls .................................. 15-16
Select Self Cleaning .....................................................
17-18
General Care & Cleaning ..............................................
19-21
Adjusting Your Oven Temperature ...................................... 21
Before You Make a Service Call ................................... 22-23
Sears Service ......................................................
Back Page
In this space below, record the date of purchase, model and
serial number of your product. You will find the model and
serial number printed on an identification plate. This serial
plate is located on the right side of the oven front frame in
the Storage or Warmer Drawer compartment. See bottom
of this page for the serial plate location.
Kenmore
Appliance
Model No.
790.
Serial No.
Date of Purchase
Save these instructions and your sales receipt for future
reference.
Warranty
One Year Limited Warranty
When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to
a defect in material or workmanship within one year from the date of purchase, call 1=800=4-MY=HOME ® to arrange for free
repair. If this appliance is used for other than private family purposes, this warranty applies for only 90 days from the date of
purchase.
This warranty covers only defects in material and workmanship.
Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied with
the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the shortest
period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and provinces do not
allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of
merchantability or fitness, so these exclusions or limitation may not apply to you.
This warranty applies only while this appliance is used in the United States and Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, I L 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
Serial
Plate Location
You will find the model and serial number printed on the serial plate.
The serial plate is located on the right side of the oven front frame in
the Storage or Warmer Drawer compartment.
Please see the illustration for exact location.
Remeber to record the serial number for future reference (See top of
page under Product Record).
Serial
platelocation;Open the
(some models) or Warmer
Storage
Drawer
Drawer (some models).
important Safety instructions
Read all instructions
before
using
this appliance.
This manual contains important safety symbols and instructions.
This symbol
_r_
This symbol
Will help alert you to situations
wil! he!p a!ert YoU to situations
if the information
in this manual
that may Cause bodily
•
•
•
•
--
for future reference.
bodily
harml
death ei propertY
injury 0r property
damager
damagel
is not
FOR YOUR SAFETY:
--
instructions
that may Cause serious
followed e×actly, a fire or explosion may result causing
property damage, personal injury or death.
--
Save these
Please pay attention to these symbols and follow all instructions given.
• All ranges can tip,
• Injury to persons could result.
• Install anti-tip device packed with range.
See Installation
Instructions.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
WHAT TO DO IF YOU SMELL GAS:
_To
reduce the risk of
tipping, the rangemust
be secured by
properly installed anti-tip bracket provided
with the range. To check if the bracket is
installed properly, visually check that rear
leveling leg is inserted into and fully
secured by the anti-tip bracket by
removing lower panel or storage drawer.
For models with a warmer drawer, grasp
the top rear edge of the range and
carefully attempt to tilt it forward. Refer to
the installation
instructions for proper antitip bracket installation,
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
Immediatelycall your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
if you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a
qualified installer, servicer or the gas supplier.
Remove all tape and packaging before using the range. Destroy
the carton and plastic bags after unpacking the range. Never
allow children to play with packaging material.
Proper Installation--Be
sure your appliance
is properly
installed and grounded by a qualified technician in accordance
with the National Fuel Gas Code ANSI Z223.- latest edition, or
in Canada CAN/CGA B149.1, and CAN/CGA B149.2, and the
the National Electrical Code ANSI/NFPA No.70-1atest edition,
or in Canada CSA Standard C22.1, Canadian Electrical Code,
Part 1, and local code requirements.
Install only per installation
instructions provided in the literature package for this range.
Ask your Sears dealer to recommend a qualified technician and
an authorized Sears repair service. Know how to disconnect the
power to the range at the circuit breaker or fuse box in case of an
emergency.
User servicing--Do
not repair or replace any part of the
appliance unless specifically
recommended
in the manuals.
All other servicing should be done only by a qualified technician,
This may reduce the risk of personal injury and damage to the
range.
Never modify or alter the construction
of a range by removing
leveling legs, panels, wire covers, anti-tip brackets/screws,
or
any other part of the product.
* Air curtain or other overhead range hoods, which operate by
blowing a downward air flow on to a range, shall not be used
in conjunction
with gas ranges other than when the hood and
range have been designed, tested and listed by an independent
test laboratory for use in combination
with each other.
NEVER use this appliance as a space
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning.
NEVER cover any slots, holes or passages in
the oven bottom or cover an entire rack with materials such as
aluminum foil. Doing so blocks air flow through the oven and
may cause carbon monoxide poisoning. Aluminum foil linings
may trap heat, causing a fire hazard.
Stepping, leaning or sitting on the doors or
drawers of this range can result in serious injuries and also
cause damage to the range. Do not allow children to climb or play
around the range. The weight of a child on an open door may cause
the range to tip, resulting in serious burns or other injury.
Do not use the oven
equipped)
or warmer
drawer
(if
for storage.
Do not store items of interest to children
in the
cabinets above a range or on the backguard of a range. Children
climbing on the range to reach items could be seriously injured.
* Storage in or on Appliance--Flammable
materials should not
be stored in an oven, warmer drawer, near surface burners or
in the storage drawer. This includes paper, plastic and cloth
items, such as cookbooks, plasticware and towels, as well as
flammable liquids. Do not store explosives, such as aerosol cans,
on or near the range.
important
Safety instructions
Do Not Leave Children Alone--Children
should not be left
alone or unattended in the area where appliance is in use. They
should never be allowed to sit or stand on any part of the
appliance.
DO NOT TOUCH SURFACE BURNERS, AREAS NEAR THESE
BURNERS, OVEN BURNERS OR iNTERiOR SURFACES OF
THE OVEN. Both surface and oven burners may be hot even
though flames are not visible. Areas near surface burners may
become hot enough to cause burns. During and after use, do not
touch, or let clothing or other flammable materials touch these
areas until they have had sufficient time to cool. Among these
areas are the cook top, surfaces facing the cook top, the oven vent
openings and surfaces near these openings, oven door and
window.
Wear Proper Apparel--Loose-fitting
or hanging garments
should never be worn while using the appliance.
Do not let
clothing or other flammable materials contact hot surfaces.
Do Not Use Water or Flour on Grease Fires--Smother
the fire
with a pan lid, or use baking soda, a dry chemical or foam-type
extinguisher.
When heating fat or grease, watch it closely. Fat or grease may
catch fire if allowed to become too hot.
Use Only Dry Potholders--Moist
or damp potholders on hot
surfaces may result in burns from steam. Do not let potholders
touch hot heating burners. Do not use a towel or other bulky cloth
instead of a potholder.
Do Not Heat Unopened Food Containers--Buildup
of pressure
may cause container to burst and result in injury.
Remove the oven door from any unused range if it is to be
stored or discarded.
IMPORTANT--ELECTRIC
IGNITION
MODELS
ONLY:
Do not
attempt to operate the oven during a power failure. If the power fails,
always turn off the oven. If the oven is not turned off and the power
resumes, the oven will begin to operate again. Once the power
resumes, reset the clock and oven function.
IMPORTANT
COOKTOP
INSTRUCTIONS
FOR USINGYOUR
Use Proper Flame Size--Adjust flame size so it
does not extend beyond the edge of the utensil. The use of
undersized utensils will expose a portion of the burner flame to
direct contact and may result in ignition of clothing. Proper
relationship of utensil to flame will also improve efficiency.
Know which knob controls each surface burner. Place a pan of
food on the burner before turning it on, and turn the burner off
before removing the pan.
=Always turn knob to the full LITE position when igniting top
burners. Visually check that burner has lit. Then adjust the flame
so it does not extend beyond the edge of the utensil.
Utensil Handles Should Be Turned inward and Not Extend Over
Adjacent Surface Burners--To
reduce the risk of burns, ignition
of flammable materials, and spillage due to unintentional contact
with the utensil, the handle of the utensil should be positioned so
that it is turned inward, and does not extend over adjacent surface
burners.
Never Leave Surface Burners
Unattended
at High Heat
Settings--Believers
cause smoking and greasy spillovers that
may ignite, or a pan that has boiled dry may melt.
• Protective Liners--Do
not use aluminum foil to line surface
burner pans, or oven bottom, except as suggested in this manual.
Improper installation of these liners may result in risk of electric
shock, or fire.
• Glazed Cooking Utensils--Only
certain types of glass, glass/
ceramic, ceramic, earthenware, or other glazed utensils are
suitable for cooktop service without breaking due to sudden
change
in temperatures.
Check
the manufacturer's
recommendations
for cooktop use.
iMPORTANT
iNSTRUCTiONS
FOR USING YOUR OVEN
* Use Care When Opening Oven Door or Warmer Drawer-Stand to the side of the range when opening the door of a hot oven.
Let hot air or steam escape before you remove or replace food in
the oven.
* Keep Oven Vent Ducts Unobstructed.
The oven vent is located
below the backguard. Touching the surfaces in this area when the
oven is operating may cause severe burns. Also, do not place
plastic or heat-sensitive items on or near the oven vent. These
items could melt or ignite.
* Placement of Oven Racks. Always place oven racks in desired
location while oven is cool. If rack must be moved while oven is
hot use extreme caution. Use potholders and grasp the rack with
both hands to reposition. Do not let potholders contact the hot
heating elements in the oven. Remove all utensils from the rack
before moving.
,, Do not use the broiler pan without its insert. The broiler pan and
its insert allow dripping fat to drain and be kept away from the high
heat of the broiler.
* Do not cover the broiler insert with aluminum foil. Exposed fat
and grease could ignite.
, Cold temperatures can damage the electronic control. When
using the appliance for the first time, or when the appliance has
not been used for an extended period of time, be certain the unit
has been in temperatures above 32°F (0°C) for at least 3 hours
before turning on the power to the appliance.
IMPORTANT
INSTRUCTIONS
YOUR RANGE
FOR CLEANING
• Clean the range regularly to keep all parts free of grease that
could catch fire. Pay particular attention to the area underneath
each surface element. Do not allow grease to accumulate. Refer
to the range manufacturer's instructions for cleaning.
,,Kitchen
cleaners
and aerosols--Always
follow
the
manufacturer's
recommended
directions for use. Be aware
that excess residue from cleaners and aerosols may ignite
causing damage and injury.
SELF CLEANING
OVENS
Clean in the self-cleaning
cycle onlythe parts listed in this Use
& Care Guide. Before self cleaning the oven, remove the broiler
pan and any utensils or foods from the oven.
,, Do Not Use Oven Cleaners--No
commercial oven cleaner or
oven liner protective coating of any kind should be used in or
around any part of the oven.
,, Do Not Clean Door Gasket--The
door gasket is essential for a
good seal. Care should be taken not to rub, damage or move the
gasket.
important Safety instructions
important
Safety Notice
The California
substances
customers
Safe Drinking
Water and Toxic Enforcement
Act requires
known to the state to cause cancer, birth defects
of potential exposure to such substances,
Grounding
Grounding type
wall receptacle
(electric
the Governor
or other reproductive
of California
to publish
harm, and requires
a list of
businesses
to warn
instructions
ignition models only)
Avoid fire hazard or electrical shook. Do not use an adapter plug,
an extension cord, or remove grounding prong from electrical power cord. Failure
to follow this warning can cause serious injury, fire or death.
This appliance is equipped with a 3-prong grounding plug for
your protection against shock hazard and should be plugged directly into a
properly grounded receptacle. DO NOT cut or remove the grounding prong from
this plug.
For personal safety, the range must be properly grounded. For maximum safety,
the power cord must be plugged into an electrical outlet that is correctly polarized
and properly grounded.
If a 2-prong wall receptacle
Power supply cord
with 3-prong
grounding
plug
Conversion
to Liquefied
is the only available outlet, it is the personal
responsibility of the consumer to have it replaced with a properly grounded 3prong wall receptacle installed by a qualified electrician.
See the INSTALLATION
INSTRUCTIONS packaged with this range for complete
installation and grounding instructions.
Petroleum
Gas (or L.R Gas)
The natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.P.) Gas.
If L.P. conversion is needed, contact 1=800=4-MY=HOME®for
assistance. The L.P. Conversion Kit is provided with this range
and is located on the left lower REAR (back side) panel of the
range. Before installing the kit be sure to follow the L.P.
Installation Instructions carefully.
Personal injury or death from electrical
shock may occur if the range is not installed by a
qualified installer or electrician.
Any additions, changes or conversions
required in order for this appliance to satisfactorily meet
the application needs must be made by Sears Service,
.............
r
Protection
Master
Protection
Agreements
Acuerodes
Agreements
Acuerdos
Congratulations on making a smart purchase. Your new Kenmore ®
product is designed and manufactured for years of dependable operation.
But like all products, it may require preventive maintenance or repair from
time to time. That's when having a Master Protection Agreement can
save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new
product. Here's what the Agreement* includes:
[]
Parts and labor needed to help keep products operating properly
under normal use, not just defects. Our coverage goes well
beyond the product warranty. No deductibles, no functional failure
excluded from coverage - real protection.
maestros
de protecci6n
de proteccion
Enhorabuena por haber hecho una compra inteligente. Su nuevo
producto Kenmore®est_t diseRado y fabricado para brindarle arcs de
funcionamiento fiable. Pero, como cualquier producto, puede necesitar
mantenimiento preventivo o reparaciones peri6dicas. Es pot eso que
tenet un Acuerdo maestro de protecci6n podrfa ahorrarle dinero y
molestias.
El Acuerdo maestro de protecci6n tambi_n sirve para prolongar la
durabilidad de su nuevo producto. El acuerdo* incluye Io siguiente:
[]
Piezas y mano de obra necesarias para contribuir a mantener el
funcionamiento adecuado de los productos utilizados en
condiciones
normales de uso, no s61o en caso de defectos de los
productos. Nuestra cobertura va mucho mas alia que la garantia
del producto. No se aplican deducibles ni exclusiones por fallas del
funcionamiento: es decir, verdadera protecci6n.
[]
Servicio t_cnico por expertos (m_.s de 10000 t_cnicos
autorizados
de Sears), Io cual significa que quien repare o realice
el mantenimiento de su producto sera un profesional de confianza.
[]
Servicio t_cnico a escala nacional y nt_mero ilimitado de
Ilamadas de solicitud de servicio t_cnico: se puede poner en
contacto con nosotros cuantas veces Io desee y cuando Io desee.
[]
Garantia "sin sorpresas":
se reemplaza el producto cubierto por el
acuerdo si ocurren cuatro o m_ts fallas del producto en un periodo
de 12 meses.
[]
Reemplazo del producto: en caso de que no se pueda reparar el
producto cubierto per el acuerdo.
[]
Revisi6n anual preventiva de mantenimiento del producto:
puede solicitada en cualquier memento, sin costo alguno.
[]
Rapida asistencia telef6nica, la cual denominamos Soluci6n
rapida: es decir, asistencia telef6nica a tray,s de cualquiera de
nuestros representantes de Sears, sobre cualquiera de nuestros
productos. Piense en nosotros como en un "manual padante del
usuario".
[]
Protecci6n contra fallas el_ctricas, contra dares debidos a
fluctuaciones de la corriente el_ctrica.
[]
The Master Protection Agreement is a risk free purchase. If you cancel
for any reason during the product warranty period, we will provide a full
refund. Or, a prorated refund anytime after the product warranty period
expires. Purchase your Master Protection Agreement today!
$250 al a_o para cubrir cualquier posible deterioro de
alimentos que haya tenido que desechar debido a una falla
mec_mica de cualquiera de nuestros refrigeradores o congeladores
cubiertos por este acuerdo.
[]
Devoluci6n de gastos de alquiler de electrodom_sticos
si la
reparaci6n de su producto asegurado toma masque el tiempo
prometido.
Some limitations and exclusions apply. For prices and additional
information in the U.S.A. call 1-800=827-6655.
[]
10% de descuento
aplicable tanto a los costos del servicio de
reparaci6n, como de las piezas instaladas relacionadas que no
hayan quedado cubiertos pot este acuerdo.
F_
Expert service by a force of more than 10,000 authorized Sears
service technicians,
which means someone you can trust will be
working on your product.
[]
Unlimited service calls and nationwide
want us, whenever you want us.
[]
"No-lemon"
guaranteereplacement of your covered product if
four or more product failures occur within twelve months.
F_
Product
[]
Annual Preventive
charge.
[]
Fast help by phone - we call it Rapid Resolution - phone support
from a Sears representative on all products. Think of us as a "talking
owner's manual".
replacement
F-zi Power surge
fluctuations.
service,
as often as you
if your covered product can't be fixed.
Maintenance
protection
Check at your request - no extra
against electrical damage due to power
rTi
$250 Food Loss Protection annually for any food spoilage that is
the result of mechanical failure of any covered refrigerator or
freezer.
[]
Rental reimbursement
longer than promised.
[]
10% discount off the regular price of any non-covered
service and related installed parts.
if repair of your covered product takes
repair
Once you purchase the Agreement, a simple phone call is all that it takes
for you to schedule service. You can call anytime day or night, or
schedule a service appointment online.
* Coverage in Canada varies on some items. For full details call
Sears Canada at 1-800-361-6665.
Sears
Installation
Service
For Sears professional installation of home appliances, garage door
openers, water heaters, and other major home items, in the U.S.A. or
Canada call 1-800-4-MY-HOME e.
Una vez que haya realizado el pago de este acuerdo, bastara una simple
Ilamada telef6nica para concertar una visita de servicio. Puede Ilamar a
cualquier hora del dia o de la noche, o bien concertar una visita de
servicio pot Internet.
La adquisici6n del Acuerdo maestro de protecciSn es una inversiSn
exenta de riesgos. Si por cualquier motivo decide cancelar dicho acuerdo
durante el periodo de garantia del producto, le haremos un reintegro total
del valor. O bien un importe proporcional si cancela el acuerdo en
cualquier otto momento posterior al vencimiento del periodo de garantfa
del producto, iAdquiera hey mismo su Acuerdo maestro de protecci6n!
Algunas limitaciones
precios e informaci6n
EE.UU.).
y exclusiones
podrian aplicarse. Para solicitar
adicional, Ilame al 1-800-827-6655 (en los
* La cobertura en Canada varia en el caso de algunos articulos.
obtener detalles completos al respecto, Ilame al 1-800-361-6665
Sears de Canada.
Servicio de instalacion
Para
de
de Sears
Para solicitar la instalacidn por profesionales de Sears de
electrodom_sticos, abridores de puertas de garaje, calentadores de agua
y otros articulos de uso prioritario en el hogar, Ilame al 1-800-4-MYHOME en los EE.UU. o CanadA.
Range Features
Your Gas Range
Features
{nc{ude:
1.
2.
3.
Electronic Oven Control with Kitchen
Left Front Burner Valve & Knob.
Left Rear Burner Valve & Knob.
4.
5.
6.
7.
8.
Right Rear Burner Valve & Knob.
Right Front Burner Valve & Knob.
Easy to clean Upswept Cooktop
Burner Grates (colors & styles may vary).
Self-Clean Oven Door Latch.
9.
10.
11.
12.
13.
14.
15.
16.
Warmer Drawer Control & Indicator Light (some models).
Automatic Oven Door Light Switch (some models).
Oven Interior Light with Shield (some models).
Self-Cleaning
Oven interior.
Adjustable Oven Rack(s).
Large 1 piece Oven Door Handle.
Full width Oven Door (style vary with model).
Storage Drawer (some models) or Warmer Drawer with Handle
and Warmer Drawer rack (some models).
5,000 BTU Simmer Burner (some models).
9,500 BTU Burner (some models).
12,000 BTU Power Burner (some models).
14,200 BTU Power Burner (some models).
Broil Pan (some models).
Broil Pan Insert (some models).
Leveling Legs and Anti-tip Bracket (included).
17.
18.
19.
20.
21.
22.
23.
NOTE: The features of your range may
vary according to model type & color.
Timer.
@
®0 O@
{!)
]i:]
Before Setting Oven Controls
OVEN VENT
Oven
Vent
Location
The oven vent is located beJow the backguard (See Fig. 1). When the oven
is on, warm air is released through this vent. This venting is necessary for
proper air circulation in the oven and good baking results. DO NOT BLOCK
THE VENT.
i
Arranging
Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Fig. 1
Removing
& Replacing
Oven
Racks
To remove, pull the rack forward until it stops. Lift up front of rack and
slide out. To replace, fit the rack onto the guides on the oven wails.
Tilt the front of the rack upward and slide the rack back into place.
Recommended
Food
Rack Positions for Broiling,
Baking & Roasting:
Rack Position
Broiling hamburgers & steaks
Broiling meats, chicken or fish
Cookies, cakes, pies, biscuits
& Muffins
5
3, 4 or 5
2 or 3
Frozen pies, angel food cake,
yeast, bread, casseroles, small
cuts of meat or poultry
Turkey, roast or ham
1 or Roasting Shelf
1 or Roasting Shelf
Fig. 2
Types of Oven
Racks
Your range may be equipped with one or more of the oven
rack types shown; Fiat Rack, or Handle Rack.
Oven
Baking
Layer Cakes with
1 or 2 Oven
Rack
Racks
For best results when baking cakes using 2 oven racks, place cookware on oven rack positions 2 & 5 (Refer to Figs. 2 & 3).
When using a single oven rack, place cookware on oven rack position 3 or 4 (Refer to Fig.s 2 & 4).
Air Circulation
in the Oven
For best air circulation and baking
results allow 2-4" (5-10 cm) around
the cookware for proper air circulation
and be sure pans and cookware do not
touch each other, the oven door, sides
or back of the oven cavity. The hot air
must be able to circulate around the
pans and cookware in the oven for
even heat to reach around the food.
Fig. 3
Fig. 4
Setting Surface Controls
Do not place plastic
items such as salt and pepper shakers,
spoon holders or plastic wrappings
on top of the range when it is in use.
These items could melt or ignite.
Potholders, towels or wood spoons could
catch fire if placed too close to a flame.
Setting
Surface
Controls
Your range may be equipped with different sized surface burners. The ability to
heat food quicker and in larger volumes increases as the burner size increases.
The SIMMER burner (some models) is best used for simmering delicate sauces,
etc.
The standard burners can be used for most surface cooking needs.
In the event of an electrical power outage,
the surface burners can be lit manually.
To light a surface burner, hold a lit match
to the burner head, then slowly turn the
surface control knob to LITE. Afterburner
lights push in and turn knob to desired
setting. Usecaution when lighting surface
burners manually.
The POWER burner or burners (some models) are best used for bringing large
quantities of liquid to temperature and when preparing larger quantities of food.
Regardless of size, always select cookware that is suitable for the amount and
type of food being prepared. Select a bumerand flame size appropriate to the pan.
Never allow flames to extend beyond the outer edge of the pan.
Operating
1.
2.
3.
3.
4.
INCORRECT
Burners:
Place cooking utensil on surface burner.
Push the surface control knob in and turn counterclockwise out of the OFF
position.
Release the knob and rotate to the LITE position. Note: All four electronic
surface ignitors will spark at the same time. However, only the burner you are
turning on wii{ ignite.
Visually check that the burner has lit.
Push the control knob in and turn counterclockwise
to the desired flame size.
The control knobs do not have to be set at a particular setting. Use the guides
and adjust the flame as needed. DO NOT cook with the surface control knob
in the LITE position. (The electronic ignitor will continue to spark if the knob
is left in the LITE position.)
Setting
CORRECT
the Gas Surface
Proper Surface
Burner
Flame Size
For most cooking, start on the highest control setting and then turn to a lower
one to complete the process. Use the recommendations below as a guide for
determining proper flame size for various types of cooking. The size and type
of utensil used and the amount of food being cooked will influence the setting
needed forcooking.
*Flame Size
High Flame
Medium Flame
Low Flame
Type of Cooking
Start most foods; bring water to a boil; pan broiling.
Maintain a slow boil; thicken sauces, gravies; steaming.
Keep foods cooking; poach; stewing.
For deep fat frying, use a thermometer and adjust the surface control knob
Never extend the flame beyond the outer] accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If
edge of the utensil. A higher flame simply / the fat is too hot, the food will brown so quickly that the center will be
wastes heat and energy, and increases / undercooked. Do not attempt to deep fat fry too much food at once as the food
your risk of being burned by the flame. J will neither brown nor cook properly.
*These settings are based on using medium=weight metal or aluminum pans with {iris. Settings may vary when using
other types of pans. The color of the flame is the key to proper burner adjustment. A good flame isclear, blue and hardly visible
in a well-lighted room. Each cone of flame should be steady and sharp. Adjust or clean burner if flame is yellow-orange.
Oven Contro(
Functions
READ TH E iNSTRUCTiONS CAREFU LLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET
PAD
Used
COOK TIME
PAD
Used to
to set the
time of day.
enter the length of
the baking time.
OVEN INTERIOR
LIGHT PAD
_
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean time and minute timer.
FEATUREINDICATOR
LIGHTS--
\
Used to
n[erlor
show
ignl
ON or OFF
These light to
use,
\
[urn over
BAKE PAD--Used
to select the bake
function.
__
\
e
•
e
;1/1
which feature is in
BROIL PAD-- Used to
select the variable
function.
broil
SELECT SELF-CLEAN
PAD
Used TOsemecT
WARM & HOLD PAD-Used to set the Warm &
Hold feature.
the Self-Cleaning
cycle. A 2. 3 or _ qour
Self-Clean ume ms', De
selecrea.
STOP/CLEAR
J
TIMER SET/OFF PAD-Used to set or cancel the
minute timer. The minute
DELAY START
PAD-- Used to set
the desired start
timer does not start or stop
cooking. Also,
TIMER SET/OFF pad is
used to set the Continuous
Bake feature,
time for baking &
Self-Clean. May be
used with COOK
TiME to program a
delayed bake cycle,
OVEN, PREHEAT & DOOR LOCKED UGHTS*
The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT"
light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the SelfClean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
PAD--
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR
pad is
used to activate oven
door lockout setting.
*Note: The OVEN indicator light on the electronic display wil! turn ON and OFF when using the Bake feature and during
preheat.-I-his is no[ms I and indicates that the oven is cYCling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
For a silent
control
panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold _.
After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press and hold _
again for 7 seconds until the control beeps
once.
Temperature
conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature
to °C (Celsius)
or from °C to °F (control
1.
Press Broim
....
appears in the display.
2.
Press and hold the /%. until "Hr' appears in the display.
3.
Press and hold B,oi_
until °F or
4.
Press the A
5.
Press any control pad to return to normal operating mode.
or V
appears in the display.
to change °F to °C or °C to °F.
10
should
not be in a Bake or Clean mode):
Setting Oven Controls
/
f
J
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash
"12:00".
1.
Press @
2.
Within 5 seconds, press and hold the ,/_
once (do not hold pad down).
or V
until the correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake or Self-Clean cycle.
To Set the Minute Timer:
1.
Press @.
2.
Press the J_. to increase the time in one minute increments. Press and hold the A
to increase the time in 10
minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If the V
3.
4.
pad is pressed first, the timer will advance to 11 hours and 59 minutes.
The display shows the timer countdown in minutes until 1 minute remains. Then the display will countdown in seconds.
When the set time has run out, the timer will beep 3 times and will continue to beep 3 times every 60 seconds until
is pressed.
Note: The indicator light located above the @
pad will glow while the minute timer is active.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set
time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in
use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that
function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the A
or V
to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out: Press _.
Note: TO turn the time of day displaY OFF 0rON
in the display presS ___ and hold foii5
seconds (the c0ntro ! Wi!l beep
once) an d then release. This feature does not rem0ve the set time of day from the memory 0fthe control When the display
is turned OFF the timed
daY wi!l re:appear foia few seconds any time the@
11
pad is touched
Setting
Oven Controls
To Set or Change
the Temperature
(cont'd)
for Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).
To Set the Controls
for Baking:
1.
Press B,ke. "
2.
Within 5 seconds, press the A
V,
3.
"appears
in the display.
or V.
The display will show "350°F (177°C). '' By pressing and holding the/_,
or
the temperature can then be adjusted in 5°F increments (1 °C if the control is set to display Celsius).
As soon as the _
or V
pad is released, the oven will begin heating to the selected temperature. When the
displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control
will beep 3 times.
4.
To cancel baking, press _.
To Change the Oven Temperature
after Baking has Started:
1.
Press B_ke
and make sure the bake temperature is displayed.
2.
Press the J%. or V
To Set Control
pad to increase or decrease the set temperature.
for Continuous
Bake or 12 Hour Energy
Saving
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than
11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous
1.
Press and hold _
baking:
down for 5 seconds until tone is heard, "----
hr" will appear in display for continuous cooking.
The current time of day will return to the display.
,
To cancel the Continuous Bake function, press _
and hold for 5 seconds until tone is heard. "12hr" will appear in
display indicating that the control has returned to the 12 Hour Energy Saving feature.
t'%
To Set Control
for Oven Lockout
[]
Oven
Lockout
The control can be programmed to lock the oven door and lockout the oven control pads.
To set Control for Oven Lockout
1.
Press _
feature:
and hold for 3 seconds. "Loc" will appear in display, the "Door Locked" indicator light will flash and the
motor driven door lock will begin to close automatically. DO NOT open the oven door while the indicator light is
flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will
appear in the display.
2.
To cancel the Oven Lockout feature, press _
and hold for 3 seconds. The control will unlock the oven door and
resume normal operation.
Note: If any control pad is pressed while in the oven
control pad is released,
Lockout mode, !'Loc', will appear inthe display
12
until the
Setting
Oven Controls
To Set the Timed
The @
(cont'd)
Bake and Delay Start Features
COOK TIME and @
DELAY START pads operate the features that will turn the oven ON and OFF at the times
you select in advance. The oven can be programmed to start immediately and shut off automatically
begin baking at a later time with a delayed start time (Delay Start).
(Timed Bake) or to
Note: During Timed Bake the preheat indicator light will not functionl
To Program the Oven to Begin Baking immediately and To Shut Off Automatically
1.
2.
Be sure that the clock shows the correct time of day.
Place the food in the oven.
3.
Press Bake.'....
(Timed Bake):
appears in the display.
LJ
4.
Within 5 seconds, press the A
or V
. The display will show "350°F (177°C)." By holding the /_or
V,the
temperature can then be adjusted in 5°F increments (1 °C if the control is set to display Celsius).
5.
Press (_.
"0:00" will flash in the display (HR:MIN).
6.
Press the _
7.
The oven will turn ON and begin heating.
or V
until the desired baking time appears in the display.
To Program Oven for a Delayed Start Time and to Shut=Off Automatically
1. Be sure that the clock shows the correct time of day.
2. Place the food in the oven.
3.
Press B_ke.'....
4.
Within 5 seconds, pressthe_
(Delayed Start Bake):
appears in the display.
or V
. The display will show "350°F (177°C)." By holding the _
or V
, the
temperature can then be adjusted in 5°F increments (1 °C if the control is set to display Celsius).
5.
Press @.
"0:00" will flash in the display (HR:MIN).
6.
Press the J_, or V
7.
Press @.
8.
Press the A
9.
Once the controls are set, the control calculates the time when baking will stop in order to start at the time you have
set.
until the desired baking time appears.
The earliest possible start time will appear in the display.
or V
until the desired start time appears in the display.
10. The oven will turn ON at the delayed start time and begin heating.
When the Set Bake Time Runs Out:
a.
"END" will appear in the display window and the oven will shut-off automatically.
b.
The control will beep 3 times every 60 seconds until _
is pressed.
To Change the Oven Temperature or Bake Time after Baking
1. Press the function pad you want to change.
2.
Press the _
or V
has Started:
to adjust the setting.
Use caution with the Timed Bake and Delayed Start features. Foods that can easily spoil such as milk,
eggs, fish, meat or poultry, should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for
more than 1 hour before cooking begins, and should be removed promptly when cooking is completed.
13
Setting
Oven Controls
(cont'd)
To Set for Broiling:
1.
Arrange the oven rack while oven is still cool. Position the rack as
suggested in the Broil Rack Position Table below.
2.
Press _,_ "----"will
appear in display.
3.
Press and hold the/%
or V
the display. Press the/%
4.
5.
6.
7.
8.
until the desired broil setting level appears in
for HI broil or the V
for LO broil. Most foods
may be broiled at the HI broil setting. Select the LO broil setting to avoid
excess browning or drying of foods that should be cooked to the well-done
stage.
For optimum browning, preheat broil burner for 3 =4 minutes before
adding food.
Place the insert on the broil pan, then place the food on the insert (See
Fig. 1; some models). DO NOT use the broil pan without the insert or cover
the insert with aluminum foil. The exposed fat could ignite.
If needed, arrange oven rack to desired postion. Place the pan on the oven
rack. Close the oven door when broiling.
Broil on one side until food is browned. Turn and broil food on 2nd side.
Note: Always pull the oven rack out to the stop position before turning or
removing the food.
Fig. 1
When broiling is finished, press _.
Broil Rack Position Table (Refer to Fig. 2)
Position
Food category
5
Medium steaks & hamburgers
4
Fish, medium-well steaks & pork chops
3
Well-done foods such as chicken & lobster
Note: The broiler pan and the insert allows grease to drain and be kept away
from the high heat of the broiler. DO NOT use the pan without the insert (some
models). DO NOT cover the insert with foil; the exposed grease could ignite.
Fig. 2
Should an oven fire occur, close the oven door and turn the oven
OFF. If the fire continues, use a fire extinguisher. DO NOT put water or flour on
the fire. Flour may be explosive.
To Operate
the Oven
Light
The interior oven light will automatically turn ON when the oven door is opened. Press (_?__to turn the interior oven light ON and
OFF whenever the oven door is closed.
The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire
holder. The glass shield must be in place whenever the oven is in use. To change the interior oven light, see "Changing the Oven
Light" in the General Care & Cleaning section.
14
Setting
Setting
Oven Controls
the Warm
& Hold
TM
(cont'd)
Feature
The '_3_'pad turns ON the Serve Warm & Hold feature and will maintain an oven temperature of 170 ° F. The Warm & Hold feature
will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold feature will
shut the oven OFF automatically. The Warm & Hold feature may be used without any other cooking operations or can be used
after cooking hasfinished using TIMED BAKE or DELAY START BAKE.
To set Warm
& Hold:
1.
Arrange interior oven racks and place baked food in oven. If the food is already in the oven go to step 2.
2.
Press ,%_'?."
"will appear in the display and the Warm & Hold indicator light above the pad will turn ON.
Note: If no further pads are touched within 6 seconds the request to turn ON Warm & Hold will be cleared.
3.
Press Aor
V
to start.
4.
To turn Warm & Hold OFF at any time press (_.
The Warm & Hold indicator light above the pad will turn OFF.
To set Warm & Hold to turn ON automatically:
1.
Arrange interior oven racks and place food in oven. Set the oven properly for Timed Bake or Delay Start Bake.
2.
Press ,%_. "
3.
Press Aor
4.
To turn Warm & Hold OFF at any time press _.
Setting
Arranging
"will appear in the display and the Warm & Hold indicator light above the pad will turn ON.
V
t_start._arm&H_ldissett_turn_Naut_maticallyafterTimedBake_rDelayedStartBakehas_nished.
The Warm & Hold indicator light above the pad will turn OFF.
Warmer Drawer Controls
Warmer
Drawer
(Warm
& Ready
TM
Drawer)
Rack Positions
(some models)
Note: Use the warmer drawer to keep hot foods hot such as: vegetables, gravies, meats, casseroles, biscuits and rolls, pastries
and heated dinner plates.
The rack can be used in 2 ways:
In the upright position to allow low profile food items to be placed both under and on top of the rack (for example, rolls
or biscuits on top of the rack and a casserole dish under - See Fig. 1).
In the downward position to allow you to place light weight food items and empty dishware (for example, rolls or
pastries and dinner plates - See Fig. 2).
The warmer drawer is equipped with a catch which may require extra force when opening and closing the drawer.
To Operate the Warmer
Ready TM) Drawer
(Warm &
Always start with hot food. It is not recommended
heat cold food in the warmer drawer.
All food
covered
quality.
Plastic
difficult
placed in the warmer drawer
with a lid or aluminum foil to
Do not use plastic wrap to
may melt onto the drawer
to clean.
to
WARMER
should be
maintain
cover food.
and be very
DRAWER
jf
i
Use only dishes, utensils and cookware
recommended for oven use in the warmer drawer.
Always use pot holders or oven mitts
when removing food from the warmer drawer as
cookware and plates will be HOT.
//
Fig. 2
Fig. 3
15
iiiii;"i
Setting
Warmer Drawer Controls
Warmer Drawer Recommended
Food Settings Table
Food item
Setting
Bacon
Hamburger Patties
Poultry
Pork Chops
Fried Foods
Pizza
Gravies
Casseroles
Eggs
Roasts (Beef, Pork, Lamb)
Vegetables
Biscuits
Rolls, hard
Pastries
Rolls (soft)
Empty Dinner Plates
Warmer
(Warm
& Ready
HI
HI
HI
HI
HI
HI
MED
MED
MED
MED
MED
MED
MED
MED
LO
LO
TM)
(cont'd)
To Set the Warmer (Warm & Ready
Control (some models)
TM)
Drawer
Thermostat
The thermostat control is used to select the temperature of the warmer drawer.
It is located on the control panel (See Fig. 3 on previous page). To set the
thermostat, push in and turn the knob to the desired setting. The temperatures
are approximate, and are designated by HI, MED and LO.
1.
2.
3.
Turn the knob to select the desired temperature setting.
For best results, preheat the drawer before adding food. An empty drawer
will preheat in approximately 15 minutes.
Turn the thermostat control to OFF after use.
Warmer (Warm & Ready
(some models)
TM)
Drawer
Temperature
Selection
Refer to the table in the side column for recommended settings. If a particular
food is not listed, start with the medium setting. If more crispness is desired,
remove the lid or aluminum foil.
Most foods can be kept at serving temperatures by using the medium setting.
When a combination of foods are to be kept warm (for instance, a meat with 2
vegetables and rolls), use the high setting.
Refrain from opening the warmer drawer while in use to eliminate loss of heat
from the drawer.
Drawer
Indicator
Light (some models)
The indicator light is located above the Warmer Drawer thermostat control. It turns on when the control is set, and stays on
until the control is turned OFF. The warmer drawer is inoperable during the Self-Clean cycle. The indicator light will not
come on during the Self-Clean cycle.
To Remove
and Replace
Warmer
Pull up with finger
(Warm & Ready
To Remove Warmer
1.
2.
3.
Left Glide
5.
To
1.
2.
3.
Push down with finger
Fig. 1
TM)
Drawer
(some models)
Drawer:
_
Turn power off before removing the warmer drawer.
Open the drawer to the fully opened position.
Locate glide lever on each side of drawer, pull up on the left glide lever and
push down on the right glide lever (See Fig. 1).
Pull the drawer away from the range.
Replace Warmer (Warm & Ready TM) Drawer:
Pull the bearing glides to the front of the chassis glide (See Fig. 2).
Align the glide on each side of the drawer with the glide slots on the range.
Push the drawer into the range until levers "click" (approximately 2"). Pull
the drawer open again to seat bearing glides into position. If you do not
hear the levers "click" or the bearing glides do not feel seated
remove the drawer and repeat steps 1 thru 3. This will minimize
possible damage to the bearing glides.
NOTE: The Warmer Drawer will NOT operate while in the Self-Clean and '!Oven
Lockout" modes
Electrical Shock Hazard can occur and result in
serious injury or death. Disconnect appliance from electric power
before cleaning and servicing the warmer drawer.
Bearing Glide
Fig. 2
16
Self-Cleaning
f
During the Self-Cleaning
cycle, the outside of the range can
become very hot to the touch. DO NOT
leave small children unattended near the
appliance.
The health of some birds
is extremely sensitive to the fumes given
off during the Self-Cleaning cycle of any
range. Move birds to another wellventilated room.
DO NOT line the oven
walls, racks, bottom or any other part of
the range with aluminum foil. Doing so
will destroy heat distribution, produce
poor baking results and cause
permanent damage to the oven interior
(aluminum foil will melt to the interior
surface of the oven).
DO NOT force the oven
door open. This can damage the
automatic door locking system. Use
caution when opening the door after the
Self-Cleaning cycle is completed. The
oven may still be VERY HOT.
DO HAND
CLEAN DOOR
DO NOT
HAND
OVE
DOOR GASKET
Note: See additional cleaning information
for the oven door in the General Care &
Cleaning section.
Self-Cleaning
Oven
A Self-Cleaning oven cleans itself with high temperatures (well above cooking
temperatures) which eliminate soils completely or reduces them to a fine
powdered ash you can wipe away with a damp cloth.
Adhere to the following cleaning precautions:
•
DO NOT use oven cleaners or oven protective coatings in or around any
part of the Self-Cleaning oven.
•
DO NOT clean the oven door gasket. The woven material of the oven door
gasket is essential for a good seal. Care should be taken not to rub,
damage or remove the gasket.
•
DO NOT use any cleaning materials on the oven door gasket. Doing so
could cause damage.
•
Remove the broiler pan and insert, all utensils and any aluminum
foil, These items cannot withstand high cleaning temperatures.
•
Oven racks do not have to be removed. If they are not removed during the
Self-Clean cycle their color will turn slightly blue and the finish will be dull.
After the cycle is complete and the oven has cooled, rub the sides of the
oven racks with wax paper or a cloth containing a small amount of salad oil
(this will make the racks glide easier into the rack position).
•
Remove any excessive spilJovers in the oven cavity before starting the
Self-Cleaning cycle. To clean, use hot, soapy water and a cloth. Large
spillovers can cause heavy smoke orfire when subjected to high
temperatures. DO NOT allow food spills with a high sugar or acid content
(such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on
the surface as they may leave a dull spot even after cleaning.
Clean any soil from the oven frame, the door liner outside the oven door
gasket and the small area at the front center of the oven bottom. These
areas heat sufficiently to burn soil on. Clean with soap and water.
NOTE: Prior to setting the Self-Clean cycle, any spills remaining on the oven
bottom should be removed.
17
Self-Cleaning
Starting
the Select
(cont'd)
Self=Clean
Cycle
or a Delayed
Start Self=Clean
Cycle
For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for average or a 4 hour cycle for
heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood
during the 1st Self-Clean cycle. This will help eliminate the normal odors associated with the 1st Self-Clean cycle.
To Set the Controls
for a Self"Clean
Cycle
or a Delayed
Start Self=Clean
Cycle:
(Note: if you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)
1.
Be sure the clock shows the correct time of day.
2.
Press @.
3.
Press and hold the A
The " : " in the time of day will flash.
pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the
desired time is displayed.
4.
Press _._.
"
5.
Press the _% or V
"appears
in the display.
once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press V.
"2:00" appears in the display or to select a 4 hour cycle press _.
"4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light
will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).
,
"CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled.
When the Self=Clean Cycle is Completed:
1.
The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.
2.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3.
If "End" is in the display and the Select Clean indicator light remains ON, press _.
The time of day will appear in the
display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping
or Interrupting
a Select
Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1.
Press _o
2.
g.
Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
Restart the Self-Clean cycle once all conditions have been corrected.
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid
possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
18
General Care & Cleaning
Cleaning Table
Surfaces
How to Clean
Aluminum (Trim Pieces) &Vinyl
Use hot, soapy water and a cloth. Dry with a clean cloth.
Glass, Painted and Plastic
Body Parts, Control Knobs
and Decorative Trim Pieces
Forgeneralcleaning,
use hot, soapy water and a cloth. Formore difficult soils andbuiltup grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60
minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of
these materials; they can scratch.
Control Panels
Before cleaning the controlpanel, turn all controls to OFF and remove the control
knobs. To remove, pull each knob straight off the shaft. Clean as instructed above.
Squeeze excess water from the cloth before wiping the panel; especially when wiping
around the controls. Excess water in or around the controls may cause damage to the
appliance. To replace knobs after cleaning, line up the flat sides of both the knob and
the shaft, then push the knob(s) into place.
Porcelain Enamel
BurnerGrates, Cooktop
Surface, Below Cooktop,
Broiler Pan & Insert, Broiler
Drawer, Door Linerand Oven
Bottom
Clean burner grates, broiler pan and insert in the dishwasher and dry upon removal. If
soils are not removed, follow the cooktop cleaning instructions below.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1
solution of clean water and ammonia. If necessary, cover difficult spots with an
ammonia-soaked paper towel for 30-40 minutes. Rinse with clean water and a damp
cloth, then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth.
Remove all cleaners or the porcelain may become damaged during furture heating. DO
NOT use spray oven cleaners on the range top.
Stainless Steel, Chrome Parts
Clean with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Do not
use cleaners with high concentrations
of chlorides or chlorines. Do not use harsh
scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning
stainless steel. Always be sure to rinse the cleaners off from the surface as bluish
stains may occur during heating that cannot be removed.
Oven Racks
Remove racks. See "Removing and Replacing Oven Racks" under Before Setting
Oven Controls. Use a mild, abrasive cleaner, following manufacturer's instructions.
Rinse with clean water and dry. After cleaning the racks, rub the sides of the racks with
wax paper or a cloth containing a small amount of baby oil or salad oil (this will make
the racks glide easier into the rack positions).
Oven Door
To clean oven door, wash with hot, soapy water and a clean cloth. DO NOT immerse
the door in water.
DO NOT clean the oven door gasket. The oven door gasket is made of a woven
material, on self cleaning models, which is essential for a good seal. Care should be
taken not to rub, damage or remove the gasket.
Cleaning
the Cooktop
The cooktop isdesigned to make cleaning easier. Because the four burners are sealed, cleanups are easy when spillovers are
cleaned up immediately. To clean, wipe with a clean, damp cloth and wipe dry.
THE COOKTOP IS NOT REMOVABLE.
Do not attempt to remove or lift the cooktop.
Use caution when replacing the burner cap so the electrode isnot damaged. This may cause a delayed ignition
or prevent the burner from igniting.
Any additions,
or conversions required in order for this appliance to perform satisfactorily must be
made by an authorized
Sears changes
Service Center.
19
General
Care & Cleaning
(cont'd)
Removing
and
Replacing
the
Lift-Off
Oven
Door
The door is heavy. For safe, temporary storage, lay the door flat with
the inside of the door facing down.
Door Hinge
locations
with oven door
fully
open
Fig. 1
Fig. 2
Oven
Door.
To Remove Oven Door:
1. Open oven door completely (horizontal with floor - See Fig. 1).
2. Pull the door hinge locks on both left and right door hinges down from the oven
frame completely towards the oven door (See Fig. 2). A tool such as a small
flat-blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides (Do not use the
oven door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven door will stop into this
position just before fully closing).
5. With the oven door in the broil stop position, lift the oven door hinge arms over
the roller pins located on each side of the oven frame (See Fig. 4).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door sides (Do not use the
oven door handle - See Fig. 3).
2. Holding the oven door at the same angle as the removal position, seat the
hook of the hinge arm over the roller pins located on each side of the oven
door frame (See Fig. 4). The hook of the hinge arms must be fully seated onto
the roller pins.
3. Fully open the oven door (horizontal with floor - See Fig. 1).
4. Push the door hinge locks up towards and into the oven frame on both left and
right oven door hinges (See Fig. 2) to the locked position.
5. CIosetheoven door.
Special Door Care Instructions
Most oven doors contain
glass
recommendations:
Fig. 3
1.
2.
3.
that
can
break.
Read
the following
Do not close the oven door until all the oven racks are fully in place.
Do not hit the glass with pots, pans, or any other object.
Scratching, hitting, jarring or stressing the glass may weaken its structure
causing an increased risk of breakage at a later time.
Changing
the Oven
Light
The oven light automatically turns ON when the door is opened. The oven light
may also be manually operated by pressing the ___ pad.
Fig. 4
Oven
Light
Wire
Holdel
The oven light bulb is located at the rear of the oven and is covered with a glass
shield held by a wire holder. The glass shield must be in place whenever the
oven is in use.
To
1.
2.
3.
4.
5.
6.
replace the oven light bulb:
Turn electrical power off at the main source or unplug the range.
Press wire holder to one side to release the glass shield.
Replace bulb with a new40 watt appliance bulb.
Replace glass shield over bulb and snap wire holder into place.
Turn power back on again at the main source (or plug the range back in).
The clock will then need to be reset. To reset, see Setting the Clock and
Minute Timer in this Use & Care Guide.
Be sure the range is unplugged and all parts are COOL before
replacing oven light. Wear a leather-faced glove for protection against possible
broken glass.
20
General
Care & Cleaning
(cont'd)
Cleaning
the ContouredWell
Areas, Burner
Cap, Burner
Head and Burner
Drip Pans (some models)
The contoured well areas, burner cap, burner head and burner drip pans (some models) should be routinely cleaned.
Keeping the burner ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions:
To Clean the Recessed and Contoured Areas of the Cooktop - If a spill occurs
on or in the recessed or contoured areas, blot up spill with an absorbent cloth.
Rinse with a clean, damp cloth and wipe dry.
To Remove and Replace the Surface Burner Caps and Surface Burner Heads
- Remove in the following order: (1st) surface burner grate, (2nd) surface burner
cap, (3rd) surface burner head and (4th) surface burner drip pan (if equipped).
Surface
Burner
Head
_ice
Holder,
i
Removable
Burner
Drip Pan
(on some models)
Adjusting
Reverse the procedure above to replace the surface burner cap, surface burner
head and surface burner drip pans (if equipped). Do not remove any parts from
the cooktop until they have completely cooled and are safe to handle. Do not
operate the surface burners without the surface burner cap and surface
burner head properly in place.
To Clean the Surface Burner Cap, Surface Burner Head and Surface Burner
Drip Pan (if equipped) - Use a soap-filled scouring pad or a mild abrasive
cleanser to clean the surface burner caps, surface burner heads and surface
burner drip pans (if equipped). The ports (or slots) around the burner head must be
routinely cleaned. If residue still remains in these ports, use a small-gauge wire or
needle to clean the slots or holes. For proper flow of gas and ignition of the
burner--DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY
OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING.
ALWAYS keep the surface burner cap and surface burner head in place whenever
a surface burner is in use.
the Oven Temperature
Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe
times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times,
you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed.
To Adjust
Oven Temperature:
1.
Press B_ke.
2.
Set the temperature to 550°F (287°C) by pressing and holding the A.
3.
Within 2 seconds, press and hold _
until the 2 digit display appears. Release _.
The display now indicates the amount
of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control
has the original factory calibration, the display will read "0."
4.
Thetemperaturecann_wbeadjustedup_rd_wn35°F(17°c)_in5°Fstepsbypressingandh_ldingthe
A
or V.Adjust
until the desired amount of offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear
before the number to indicate that the oven will be cooler by the displayed amount of degrees.
5.
When you have made the desired adjustment, press _
to go back to the time of day display.
Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.
21
Before You Call
Solutions
to Common
Problems
Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that
are not the result of defective workmanship or materials in this appliance.
OCCURRENCE
POSSIBLE
CAUSE/SOLUTION
Range is not level.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust
leveling legs at base of range until the rack is level. When range is level, cooktop may
appear out of alignment if countertop is not level.
Weak, unstable floor. Be sure floor is level and can adequately support range. Contact
a carpenter to correct sagging or sloping floor.
Kitchen cabinet misalignment may make range appear to be unlevel. Be sure cabinets
are square and have sufficient room for range clearance.
Cannot move appliance easily. Appliance
must be accessible for service.
Cabinets
problem.
not square or are built in too tight. Contact a cabinet maker to correct the
Contact builder or installer to make appliance accessible.
Carpeting
carpet.
interferes with range. Provide sufficient space so range can be lifted over
Gas line is hard-plumbed.
connector installed.
Surface burners
do not light.
Have a flexible C.S.A. international approved metal appliance
Surface Control knob has not been completely turned to LITE. Push in and turn the
Surface Control knob to LITE until burner ignites and then turn control knob to desired
flame size.
Burner ports are clogged. With the burner off, use a small-gauge wire or needle to clean
ports. See "Surface Burners" in the General Care & Cleaning table for additional
cleaning instructions.
Range power cord is disconnected from outlet (electric ignition models only). Be sure
cord is securely plugged into the outlet.
Electrical power outage (electric ignition models only). Burners can be lit manually. See
Setting Surface Controls.
Surface burnerflame
burns half way around.
Burner ports are clogged. With the burner off, clean ports by using a small-gauge
or needle.
wire
Moisture is present after cleaning. Lightly fan the flame and allow burner to operate until
flame is full. Dry the burners thoroughly following instructions in the General Care &
Cleaning section.
Surface burner flame is orange.
Dust particles in main line. Allow the burner to operate a few minutes until flame turns
blue.
In coastal areas, a slightly orange flame is unavoidable
Oven does not operate.
Be sure the oven controls are set correctly for the desired function. See Setting
Controls or Entire Appliance Does Not Operate (see below).
Be sure regulator gas valve is "ON". See installation
Entire appliance
does not operate.
due to salt air.
Check house circuit breakers.The
Oven
instructions.
time of day must be set in order to operate the oven.
Make sure electrical cord/plug is plugged tightly into outlet (electric ignition models only).
Service wiring not complete. Call 1-800-4-MY-HOME
® for assistance
(See back cover).
Electrical power outage (electric ignition models only). Check house lights to be sure.
Call your local electric company for service. Surface burners can be lit manually. See
Setting Surface Controls.
Be sure gas supply is turned on.
Oven light does not work.
Burned-out or loose bulb. See Changing
tighten the bulb.
22
the Oven Light (some models) to replace or
Before You Call
Solutions
to Common
Problems
OCCURRENCE
POSSIBLE
Oven smokes excessively
during
broiling.
CAUSE/SOLUTION
Meat is too close to the broil burner. Reposition the oven rack to provide more clearance
between the meat and the broiler.
Meat not properly prepared. Remove excess fat from meat. Slash remaining fatty edges
to prevent curling, but do not cut into the lean.
Broiler pan used without insert or insert covered with foil. DO NOT use the broiler pan
without the insert or cover the insert with foil.
Broiler drawer needs to be cleaned. Excessive smoking is caused by a build-up of grease
or food spatters. If the broiler is used often, clean on a regular basis (some models).
Oven door or Broiler drawer is open. Door/Drawer
Oven control beeps and displays
code error (for example F11).
Poor baking
Self-Cleaning
any F
should be closed when broiling.
Electronic control has detected a fault condition. Press STOP/CLEAR to clear the display
and stop beeping. Reprogram oven. If fault recurs, record fault number. Press STOP/
CLEAR and call 1-800-4-MY=HOME®
for assistance (See back cover).
Many factors affect baking results. Make sure the proper rack position is used. Center
food in the oven and space pans to allow air to circulate. Allow the oven to preheat to
the set temperature
before placing food in the oven. Try adjusting the recipe's
recommended temperature or baking time. If you feel the oven is cooking too hot or cool,
see Adjusting Your Oven Temperature.
results.
cycle does not work.
Controls are not set properly. Follow instructions
in Self-Cleaning
section.
Self-cleaning cycle was interrupted. Stop time must be set 2 to 4 hours past the start time.
Follow steps under "Stopping or Interrupting a Self-Clean Cycle" under Self Cleaning.
Soil is not completely
removed.
Failure to clean bottom front, top of oven or door areas outside oven seal. These areas
are not in the self-cleaning area, but get hot enough to burn on residue. Clean these
areas before starting the self-clean cycle. Burned-on residue may be cleaned with a stiff
nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.
Excessive spillovers in oven. Set self-clean cycle for a longer cleaning time.
Flames inside oven or smoking from vent.
Excessive spillovers in oven. This is normal, especially for pie spillovers or large
amounts of grease on the oven bottom. Wipe up excessive spillovers before starting the
self-clean cycle. If flames or excessive smoke are present, stop the self-clean cycle and
follow the steps under "Stopping or Interrupting the Self-Clean Cycle" in the Self
Cleaning section.
23
.....
Your Home
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME
® (1-800-469-4663)
Ca,aoyt r eay
e, o,o ght/US.A
aodCanaea/
www,sears.com
For expert
home
solutions
www.sears,ca
advice:
www.managemyhome.com
Our Home
® Registered
Trademark
/ TMTrademark
/ SMService
Mark of Sears Brands,
@ Marca Registrada / TM Marca de Fabrica / SMMarca de Servicio
MCMarque de commerce / MD Marque d6pos6e de Sears Brands,
LLC
de Sears Brands,
LLC
LLC
© Sears Brands, LLC
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii
iiiiiiiiiiiiiiii