Download Crestron SW-VOTE User manual

DCS 6000 Digital Conference System
User Manual
Connecting Units
This chapter gives an overview of typical system
connections using the CU 6105 Central Unit:
combinations of the schematics are however not
only possible, but very common used.
Although the schematics are typical and are
intended to give a general overview,
Connecting Conference Unit
The DCS 6000 Conference Units are connected to
the CU 6105 using EC 6001-xx Cat5e cables. This
is the basic connection of the system.
Please refer to section ‘Using only one DCS-LAN
chain’ for information about the number of units
which can be connected using one chain.
Both of the DCS-LAN chain connectors on the CU
6105 can be used for connecting any Conference
Unit or other units.
Refer to section ‘Using multiple DCS-LAN chains
’ when using both chains.
Figure 0-A
Connecting DCS 6000 conference units.
When using JB 6104 Junction boxes, the
conference units can be connected and
disconnected without interrupting the conference.
Figure 0-B
Please refer to the ‘User Manual JB 6104’ for
further details.
Connecting DCS 6000 conference units using JB 6104 Junction Boxes.
16