Download Bosch T20-UL Operating instructions

8. Removeanyflufffromthe sealson thedryerandheat
exchanger.
9.Allowthecap andthe heatexchangerto dryfully.
10.Firstinsertthe heatexchanger,thenthecap.
11.Turnbackbothlockinglevers.
NOTICE: Use white vinegar only!
Clean the moisture sensors once a month.
Cleaning
the lint filter area
Over time, fluff from the drying process collects in the lint
filter area.
12.Closethe maintanance
flapuntilit locksintoposition.
13. Look in the Troubleshooting table also to reset the
maintenance indication.
Troubleshooting; Page 28
Cleaning
the moisture
sensors
Occasionally the moisture sensors have to be cleaned
because a fine layer of transparent buildup is deposited
on the sensors.
To clean the moisture sensors:
1. Open the door.
This fluff can be easily removed using your vacuum
cleaner, at least once a month.
Maintenance
of drain hose
If Check drain indicator lights up, check the drain hose, it
may be kinked or bent, and/or the drain hose connection
conditions.
NOTICE: If Check drain indicator still lights up after the
maintenance, you should contact customer service or
your local dealer.
2. The deposit on the sensors can easily be removed by
wiping the sensors (the two bars next to the lint filter)
with a cloth and a little white vinegar.
27