Download MTU 12 V 2000 M72 Operating instructions

Transcript
Table of Contents
1 Safety
1.1
1.2
1.3
1.4
1.5
General conditions
Personnel and organizational requirements
Transport
Safety regulations for startup and operation
Safety regulations for maintenance and
repair work
1.6 Auxiliary materials, fire prevention and
environmental protection
1.7 Conventions for safety instructions in the
text
7
8
9
10
Engine side and cylinder designations
Product description
Engine layout
Sensors, actuators and injectors –
Overview
Starting the engine
Stopping the engine
Emergency stop
After stopping the engine
Fuel treatment system – Shutdown
Plant – Cleaning
14
17
5 Maintenance
5.1 Maintenance task reference table [QL1]
18
19
25
27
3 Technical Data
32
35
38
41
44
45
DCL-ID: 0000014355 - 003
4 Operation
4.1 Engine – Putting the engine into operation
(out of service > 3 months)
4.2 Putting the engine into operation after
scheduled out-of-service period
4.3 Tasks after extended out-of-service periods
(>3 weeks)
4.4 Checks prior to start-up
4.5 Fuel treatment system – Putting into
operation
4.6 Operational checks
4.7 Fuel treatment system – Switching on
60
6 Troubleshooting
6.1 Fuel treatment system – Troubleshooting
6.2 Troubleshooting
46
47
48
49
50
52
53
61
62
7 Task Description
7.1 SOLAS
3.1 12V 2000 M72 engine data: Enginemounted heat exchanger, EPA stage 2
3.2 12 V 2000 M72 engine data: remote heat
exchanger, EPA stage 2
3.3 16V 2000 M72 engine data: Enginemounted heat exchanger, EPA stage 2
3.4 16V 2000 M72 engine data: Separate heat
exchanger, EPA stage 2
3.5 Firing order
3.6 Engine – Main dimensions
54
55
56
57
58
59
11
2 General Information
2.1
2.2
2.3
2.4
4.8
4.9
4.10
4.11
4.12
4.13
7.1.1 SOLAS shielding as per MTN 5233 –
Installation
7.1.2 SOLAS shielding – Installation
7.1.3 Installation locations for SOLAS shielding
65
65
66
67
7.2 Engine
72
7.3 Cylinder Liner
74
7.2.1 Engine – Barring manually
7.2.2 Engine – Barring with starting system
7.3.1 Cylinder liner – Endoscopic examination
7.3.2 Cylinder liner – Instructions and comments on
endoscopic and visual examination
7.4 Crankcase Breather
7.4.1 Crankcase breather – Cleaning oil preseparator element
7.4.2 Crankcase breather – Oil separator
replacement, diaphragm check and
replacement
7.5 Valve Drive
7.5.1 Valve clearance – Check and adjustment
7.5.2 Cylinder-head cover – Removal and
installation
72
73
74
76
78
78
79
81
81
84
7.6 Injection Valve / Injector
85
7.7 Fuel System
88
7.6.1 Injector – Replacement
7.6.2 Injector – Removal and installation
7.7.1 Fuel system – Venting
85
86
88
M015650/04E 2012-02 | Table of Contents | 5