Download Audio Tech 462 Owner`s manual

Assembling the speaker stand
to the speaker
Before connecting the speakers, assemble the
speaker stand to the speaker as illustrated.
1
Post
Base
Hole 1. Fix the post to the
base by rotating the
post. And Draw the
speaker cord through
the hole on the base.
Speaker System Connection
Connect the speakers using the supplied speaker
cables.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Front speaker
(Right)
Front speaker
(Left)
2
Installation and Setup
2. Draw the speaker
cord through the hole
on the speaker. .
Subwoofer
3. Fix the speaker to the
stand by rotating the
speaker. Connect the
speaker cord to the
appropriate terminals
on the speaker.
3
Notes:
Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack base.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Notes:
Do not catch the speaker cord between the
speaker and the post
Do not drop the speaker when mounting.
9
Downloaded From TheatreSystem-Manual.com Manuals