Download Qualcomm 2760 User Guide

QCP2760
8/30/99 1:33 PM
Page 20
Standby mode.
Standby mode is the most basic state of your Sprint PCS Phone.
The phone goes into Standby mode soon after you turn it on or
whenever you press
END
. When your phone is in Standby mode,
you will typically see the banner (the message displayed when you
turn on your phone). From Standby mode, you can press the
key under [MENU] to open the menus or the
key
under [BOOK] to view the Internal Phone Book. If you enter a
phone number, you can press
TALK
to dial it, follow the
instructions on the display to save it in the Internal Phone Book
or find it in the Internal Phone Book if it’s already there.
Press
END
at any time to return to Standby mode. Be careful; if
you’re on a call when you press
END
, you’ll return to Standby
mode and it also disconnects the call. Press
C
several times or
hold it down to return to Standby mode without ending the call.
Power Save mode.
Your Sprint PCS Phone comes with a Power Save feature that will
automatically be activated if your phone is unable to find a signal
after 15 minutes of searching. While this feature is active, the
phone’s battery charge is conserved. The phone will automatically
recheck for a signal periodically. To manually force the phone to
recheck for a signal, press any key. A message on the display will
let you know when the phone is operating in Power Save mode.
20