Download Miele G 686-3 Plus Operating instructions

Problem solving guide
Problem
Possible cause
Remedy
The indicator light "Inlet/Drain" lights up and
flashes alternately.
The stopcock is closed.
The water inlet filter is
blocked.
Open the stopcock fully.
Before rectifying the problem you must:
– Turn the programme
selector to the "Stop"
position.
– Switch the dishwasher
off using the "On/Off"
button.
then:
The indicator light "Inlet/Drain" lights up during the "Energy save"
programme.
48
– Clean the water inlet filter, see "Solving problems".
The Waterproof system
Call the Miele Service Dehas reacted.
partment.
The intake water has not – Start the programme
again.
reached the required temperature of 45 °C, the hot – If the indicator light cowater system may be
mes on again select a
overloaded (see
different programme.
"Programme selection").